Alcatel-Lucent I-240W-A
A fibre router (GPON FTTH ONT).
BusyBox version:
BusyBox v1.15.3 () multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.
Usage: busybox [function] [arguments]...
or: function [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as!
Currently defined functions:
[, [[, adduser, ar, arp, ash, awk, basename, brctl, bunzip2, bzcat,
bzip2, cal, cat, catv, chgrp, chmod, chown, chpasswd, chroot, cksum,
clear, cmp, cp, cpio, crond, crontab, cut, date, dd, deluser, depmod,
devmem, df, diff, dirname, dmesg, dnsdomainname, dos2unix, dpkg,
dpkg-deb, du, echo, ed, egrep, env, expand, expr, false, fdisk, fgrep,
find, flash_eraseall, flash_lock, flash_unlock, free, freeramdisk,
fsync, ftpd, ftpget, ftpput, fuser, getopt, getty, grep, gunzip, gzip,
halt, hd, head, hexdump, hostid, hostname, id, ifconfig, ifdown, ifup,
inetd, init, insmod, install, ip, ipaddr, iplink, iproute, iprule,
iptunnel, kill, killall, killall5, klogd, length, less, linuxrc, ln,
logger, login, logname, logread, losetup, ls, lsmod, lzmacat, makedevs,
md5sum, mdev, mesg, mkdir, mkdosfs, mkfifo, mkfs.vfat, mknod, mktemp,
modprobe, more, mount, mountpoint, mv, nc, netstat, nice, nohup,
nslookup, od, passwd, pgrep, pidof, ping, ping6, pivot_root, pkill,
poweroff, printenv, printf, ps, pwd, rdate, rdev, readlink, realpath,
reboot, renice, reset, rm, rmdir, rmmod, route, rpm, rpm2cpio, sed,
seq, sh, sha1sum, sha256sum, sha512sum, sleep, sort, split,
start-stop-daemon, stat, strings, stty, su, sulogin, sum, switch_root,
sync, sysctl, syslogd, tail, tar, tcpsvd, tee, telnet, telnetd, test,
tftp, tftpd, time, top, touch, tr, traceroute, true, tty, udpsvd,
umount, uname, uncompress, unexpand, uniq, unix2dos, unlzma, unzip,
uptime, usleep, vconfig, vi, watch, wc, wget, which, who, whoami,
xargs, yes, zcat
CPU info
# cat /proc/cpuinfo system type : Broadlight Lilac SOC processor : 0 cpu model : MIPS 74Kc V4.12 BogoMIPS : 248.21 wait instruction : yes microsecond timers : yes tlb_entries : 64 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0000, 0x0000, 0x0000] ASEs implemented : mips16 dsp shadow register sets : 1 core : 0 VCED exceptions : not available VCEI exceptions : not available
MTD mapping
# cat /proc/mtd dev: size erasesize name mtd0: 02600000 00020000 "rootfs0" mtd1: 02600000 00020000 "rootfs1" mtd2: 00100000 00020000 "starter" mtd3: 00c00000 00020000 "cfg" mtd4: 00280000 00020000 "uboot0" mtd5: 00280000 00020000 "uboot1" mtd6: 00400000 00020000 "linux0" mtd7: 00400000 00020000 "linux1" mtd8: 01a00000 00020000 "logfs" mtd9: 02370000 0001f800 "0" mtd10: 0000000c 0001f800 "0" mtd11: 009f7800 0001f800 "1" mtd12: 0183d800 0001f800 "0" mtd13: 02370000 0001f800 "0" mtd14: 00242dba 0001f800 "0" mtd15: 00080430 0001f800 "0" mtd16: 00040000 0001f800 "1" mtd17: 00080430 0001f800 "0" mtd18: 00040000 0001f800 "1"
Kernel supported devices
# cat /proc/devices Character devices: 1 mem 4 ttyS 5 /dev/tty 5 /dev/console 5 /dev/ptmx 10 misc 21 sg 50 gpio_mgr 60 ri_drv 75 igmpdrv 77 button_driver 78 int_mgr_driver 90 mtd 92 cslac 94 spi 108 ppp 118 bl_watchdog 128 ptm 136 pts 180 usb 189 usb_device 211 gpio_led 212 phy_adapter 244 dspforward 245 logger 246 bl_shell 247 bosa 248 ubi6 249 ubi4 250 ubi3 251 ubi2 252 ubi5 253 ubi1 254 ubi0 Block devices: 259 blkext 8 sd 31 mtdblock 65 sd 66 sd 67 sd 68 sd 69 sd 70 sd 71 sd 128 sd 129 sd 130 sd 131 sd 132 sd 133 sd 134 sd 135 sd
SerialPort params:
# cat /proc/cmdline ubi.mtd=1 root=ubi0_0 rw rootfstype=ubifs ip=192.168.0.0:192.168.1.22:192.168.2.55:255.255.255.0:::off console=ttyS0,115200 bootversion=Jul-15-2014--20:08:09
Linux kernel version:
# cat /proc/version Linux version 2.6.34.8-BCM2.1.11.0 (buildmgr@AONT07) (gcc version 4.4.1 (Wind River Linux Sourcery G++ 4.4a-323) ) #1 Tue Jul 15 20:09:55 CST 2014
System version:
# uname -v 1 Tue Jul 15 20:09:55 CST 2014
Process list:
# ls /proc 1 258 bl_lilac_br_fp modules 100 261 bl_netdev mounts 1021 286 bldrv mtd 1029 28871 buddyinfo net 1032 299 bus pagetypeinfo 1033 3 cmdline partitions 1040 311 config.gz sched_debug 115 326 cpuinfo schedstat 124 340 crypto scsi 125 353 devices self 126 362 diskstats slabinfo 130 371 driver softirqs 13221 373 execdomains stat 158 376 filesystems sys 15818 4 fs sysvipc 1660 453 gpio timer_list 1667 5 igmpdrv timer_stats 1758 6 interrupts tty 1765 806 iomem uptime 1772 846 ioports version 1777 849 irq vmallocinfo 1782 851 kallsyms vmstat 193 854 kcore watchdog 1972 87 kmsg wifi_mw 2 89 kpagecount wlan0 2023 895 kpageflags wlan0-va0 223 897 loadavg wlan0-va1 237 9 locks wlan0-va2 247 91 meminfo wlan0-va3 251 bl misc zoneinfo
Loaded modules list:
# lsmod Module Size Used by Tainted: P ri 15659 10 bl_dying_gasp,hal_cslac_api2_drv,kigmp,bldrv,lilac_net_dev,button_driver,int_mgr,gpio_led,bosa,gpio_mgr gpio_mgr 5108 9 bl_dying_gasp,bldrv,GateMakerPro,button_driver,gpio_led,bosa,netlinkmsg netlinkmsg 5188 2 button_driver bosa 15542 5 GateMakerPro gpio_led 6889 10 bl_dying_gasp,rtl8192cd,lilac_net_dev,phy_driver phy_driver 2903 4 hw_watchdog 1098 0 int_mgr 1792 2 bl_dying_gasp,button_driver button_driver 4755 0 stratosphere 35115 3 GateMakerPro,logger_drv,shell_drv shell_drv 163419 6 spf,dmm,GateMakerPro,logger_drv logger_drv 34371 1 GateMakerPro GateMakerPro_GPL 60473 10 iphost_net_dev,kigmp,bldrv,dmm,rgw_arp,rgw_nf,lilac_br_fp,wifi_mw,lilac_net_dev,GateMakerPro GateMakerPro 1941093 4 bl_dying_gasp,bldrv,dmm,lilac_net_dev lilac_net_dev 29905 8 spf,kigmp,bldrv,dmm,dspforward,rgw_nf,lilac_br_fp,wifi_mw rtl8192cd 806039 1 wifi_mw wifi_mw 6999 0 lilac_br_fp 2637 0 rgw_nf 55773 1 bldrv rgw_arp 5533 0 xt_MARK 484 0 xt_PBITMARK 724 3 dspforward 2821 0 dmm 145772 3 spf,dp_rm,bldrv bldrv 121462 5 iphost_net_dev,kigmp dp_rm 3165 6 kigmp 82856 0 spf 8721 0 acCeva_dsp 1709172 4 hal_cslac_api2_drv 471963 3 bl_dying_gasp bl_dying_gasp 1018 0 iphost_net_dev 5978 0 nf_conntrack_ftp 4900 1 nf_nat_ftp nf_nat_ftp 1108 0 nf_conntrack_tftp 2564 1 nf_nat_tftp nf_nat_tftp 452 0 nf_conntrack_h323 35200 1 nf_nat_h323 nf_nat_h323 4932 0 nf_conntrack_sip 16502 1 nf_nat_sip nf_nat_sip 5412 0 nf_conntrack_rtsp 4375 1 nf_nat_rtsp nf_nat_rtsp 3620 0 nf_conntrack_proto_gre 2797 1 nf_conntrack_pptp nf_nat_proto_gre 871 1 nf_nat_pptp nf_conntrack_pptp 3540 1 nf_nat_pptp nf_nat_pptp 1316 0
Memory information:
# cat /proc/meminfo MemTotal: 98320 kB MemFree: 20944 kB Buffers: 0 kB Cached: 33088 kB SwapCached: 0 kB Active: 21224 kB Inactive: 12700 kB Active(anon): 16664 kB Inactive(anon): 132 kB Active(file): 4560 kB Inactive(file): 12568 kB Unevictable: 18348 kB Mlocked: 18348 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 98320 kB LowFree: 20944 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 4 kB Writeback: 0 kB AnonPages: 19232 kB Mapped: 18396 kB Shmem: 2788 kB Slab: 13044 kB SReclaimable: 1460 kB SUnreclaim: 11584 kB KernelStack: 824 kB PageTables: 608 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 49160 kB Committed_AS: 250988 kB VmallocTotal: 1015800 kB VmallocUsed: 11216 kB VmallocChunk: 972468 kB
Mounted devices:
# cat /proc/mounts rootfs / rootfs rw 0 0 ubi0_0 / ubifs rw,relatime 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs rw,relatime 0 0 /dev/ram1 /tmp tmpfs rw,relatime,size=65536k 0 0 /dev/ubi1_1 /configs ubifs rw,relatime 0 0 /dev/ubi5_0 /logs ubifs rw,relatime 0 0
Ethernet configuration:
# ifconfig
br0 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:373067 errors:0 dropped:0 overruns:0 frame:0
TX packets:398570 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19431367 (18.5 MiB) TX bytes:88289304 (84.1 MiB)
brsfu Link encap:Ethernet HWaddr 54:A6:19:78:28:41
inet6 addr: fe80::56a6:19ff:fe78:2841/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:354222 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17514520 (16.7 MiB) TX bytes:558 (558.0 B)
eth0 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:138650 errors:0 dropped:0 overruns:0 frame:0
TX packets:252444 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8788640 (8.3 MiB) TX bytes:16577585 (15.8 MiB)
eth1 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth2 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:11540 errors:0 dropped:0 overruns:0 frame:0
TX packets:23107 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1080754 (1.0 MiB) TX bytes:1890880 (1.8 MiB)
eth3 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8246 errors:0 dropped:0 overruns:0 frame:0
TX packets:149180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:510112 (498.1 KiB) TX bytes:9449496 (9.0 MiB)
gpon0 Link encap:Ethernet HWaddr 02:4C:FA:D2:D8:B0
inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::4c:faff:fed2:d8b0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:2628 (2.5 KiB)
iphost0 Link encap:Ethernet HWaddr 54:A6:19:78:28:42
inet6 addr: fe80::56a6:19ff:fe78:2842/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:64215 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:14072318 (13.4 MiB)
iphost0.2 Link encap:Ethernet HWaddr 54:A6:19:78:28:42
inet addr:10.146.8.25 Bcast:10.146.8.255 Mask:255.255.255.0
inet6 addr: fe80::56a6:19ff:fe78:2842/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:123446 errors:0 dropped:0 overruns:0 frame:0
TX packets:64209 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:16067815 (15.3 MiB) TX bytes:14071850 (13.4 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4166 errors:0 dropped:0 overruns:0 frame:0
TX packets:4166 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1247894 (1.1 MiB) TX bytes:1247894 (1.1 MiB)
ppp111 Link encap:Point-to-Point Protocol
inet addr:180.245.134.229 P-t-P:180.245.128.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:183387 errors:0 dropped:0 overruns:0 frame:0
TX packets:110457 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:71240111 (67.9 MiB) TX bytes:6584142 (6.2 MiB)
wan0 Link encap:Ethernet HWaddr 54:A6:19:78:28:44
inet6 addr: fe80::56a6:19ff:fe78:2844/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1504 Metric:1
RX packets:604051 errors:0 dropped:0 overruns:0 frame:0
TX packets:116353 errors:16 dropped:16 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:112802906 (107.5 MiB) TX bytes:9656545 (9.2 MiB)
wan0.881 Link encap:Ethernet HWaddr 54:A6:19:78:28:44
inet6 addr: fe80::56a6:19ff:fe78:2844/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:189284 errors:0 dropped:0 overruns:0 frame:0
TX packets:116362 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:73712619 (70.2 MiB) TX bytes:9657145 (9.2 MiB)
wan1 Link encap:Ethernet HWaddr 54:A6:19:78:28:45
inet6 addr: fe80::56a6:19ff:fe78:2845/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:8 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wan2 Link encap:Ethernet HWaddr 54:A6:19:78:28:46
inet6 addr: fe80::56a6:19ff:fe78:2846/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:8 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wan3 Link encap:Ethernet HWaddr 54:A6:19:78:28:47
inet6 addr: fe80::56a6:19ff:fe78:2847/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:8 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wan4 Link encap:Ethernet HWaddr 54:A6:19:78:28:48
inet6 addr: fe80::56a6:19ff:fe78:2848/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:8 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wan5 Link encap:Ethernet HWaddr 54:A6:19:78:28:49
inet6 addr: fe80::56a6:19ff:fe78:2849/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:8 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wan6 Link encap:Ethernet HWaddr 54:A6:19:78:28:4A
inet6 addr: fe80::56a6:19ff:fe78:284a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:7 dropped:7 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wan7 Link encap:Ethernet HWaddr 54:A6:19:78:28:4B
inet6 addr: fe80::56a6:19ff:fe78:284b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:8 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wan8 Link encap:Ethernet HWaddr 54:A6:19:78:28:41
inet6 addr: fe80::56a6:19ff:fe78:2841/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8192 errors:7 dropped:7 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:490246 (478.7 KiB)
wifi_fp0 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:222891 errors:0 dropped:0 overruns:0 frame:0
TX packets:481793 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15315713 (14.6 MiB) TX bytes:92664705 (88.3 MiB)
wifi_fp1 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:348850 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:22156386 (21.1 MiB)
wifi_fp2 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:343033 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:21832591 (20.8 MiB)
wifi_fp3 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:343033 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:21832591 (20.8 MiB)
wlan0 Link encap:Ethernet HWaddr 54:A6:19:78:28:40
inet6 addr: fe80::56a6:19ff:fe78:2840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7283124 errors:0 dropped:0 overruns:0 frame:0
TX packets:7747273 errors:54532 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2752839856 (2.5 GiB) TX bytes:896296006 (854.7 MiB)
Interrupt:130
wlan0-va1 Link encap:Ethernet HWaddr 54:A6:19:78:28:42
inet6 addr: fe80::56a6:19ff:fe78:2842/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1723057 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:333329840 (317.8 MiB) TX bytes:0 (0.0 B)
Kernel Config
#zcat /proc/config.gz # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34.8 # Tue Jul 15 20:08:17 2014 # CONFIG_MIPS=y # # Machine selection # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set CONFIG_BL_LILAC_SOC=y # CONFIG_NEC_MARKEINS is not set # CONFIG_MACH_VR41XX is not set # CONFIG_NXP_STB220 is not set # CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_MACH_TX39XX is not set # CONFIG_MACH_TX49XX is not set # CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set # CONFIG_ALCHEMY_GPIO_INDIRECT is not set CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # # CONFIG_CPU_LOONGSON2E is not set # CONFIG_CPU_LOONGSON2F is not set # CONFIG_CPU_MIPS32_R1 is not set CONFIG_CPU_MIPS32_R2=y # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set # CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set # CONFIG_CPU_R10000 is not set # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set # CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_MIPS32_R2=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR2=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type # CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_CPU_HAS_SYNC=y CONFIG_HAVE_GET_CYCLES_32=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_HIGHMEM=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_WRHV_X86_HRTIMERS is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set # CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_100HZ=y CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-BCM2.1.11.0" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set # CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_HAVE_GET_CYCLES is not set CONFIG_HAVE_TRACE_CLOCK=y # CONFIG_HAVE_TRACE_CLOCK_GENERIC is not set CONFIG_HAVE_TRACE_CLOCK_32_TO_64=y CONFIG_HAVE_UNSYNCHRONIZED_TSC=y # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # # Kernel Performance Events And Counters # # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # # GCOV-based kernel profiling # # CONFIG_SLOW_WORK is not set # CONFIG_LTT is not set CONFIG_HAVE_LTT_DUMP_TABLES=y # CONFIG_HAVE_IMMEDIATE is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_INLINE_SPIN_UNLOCK=y # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y # CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y # CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_MMU=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_PM_SNAPSHOT_POSSIBLE=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_PM_RUNTIME is not set CONFIG_PM_OPS=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=y # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y # CONFIG_IP_PIMSM_V1 is not set # CONFIG_IP_PIMSM_V2 is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_EVENTS=y # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_GRE=m # CONFIG_NF_CT_PROTO_SCTP is not set # CONFIG_NF_CT_PROTO_UDPLITE is not set CONFIG_NF_CT_PROTO_ESP=m # CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m # CONFIG_NF_CONNTRACK_IRC is not set # CONFIG_NF_CONNTRACK_NETBIOS_NS is not set CONFIG_NF_CONNTRACK_PPTP=m # CONFIG_NF_CONNTRACK_SANE is not set CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_IPSEC=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CONNTRACK_RTSP=m CONFIG_NF_CT_NETLINK=y # CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y CONFIG_NETFILTER_XT_TARGET_CONNMARK=y # CONFIG_NETFILTER_XT_TARGET_CT is not set CONFIG_NETFILTER_XT_TARGET_DSCP=y # CONFIG_NETFILTER_XT_TARGET_HL is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_NOTRACK=y # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=y # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set CONFIG_NETFILTER_XT_MATCH_DSCP=y # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_HL is not set CONFIG_NETFILTER_XT_MATCH_IPRANGE=y # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set CONFIG_NETFILTER_XT_MATCH_LIMIT=y # CONFIG_NETFILTER_XT_MATCH_MAC is not set CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NETFILTER_XT_MATCH_LAYER7=y CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG=y # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_TIME=y CONFIG_NETFILTER_XT_MATCH_U32=y # CONFIG_NETFILTER_XT_MATCH_OSF is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y # CONFIG_IP_NF_TARGET_ULOG is not set CONFIG_NF_NAT=y CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_IP_NF_TARGET_REDIRECT is not set # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_ESP=m CONFIG_NF_NAT_FTP=m # CONFIG_NF_NAT_IRC is not set CONFIG_NF_NAT_RTSP=m CONFIG_NF_NAT_TFTP=m # CONFIG_NF_NAT_AMANDA is not set CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_NF_NAT_IPSEC=m CONFIG_IP_NF_MANGLE=y # CONFIG_IP_NF_TARGET_CLUSTERIP is not set # CONFIG_IP_NF_TARGET_ECN is not set # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=y CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y # # IPv6: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV6=y # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=y # CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set # CONFIG_IP6_NF_MATCH_FRAG is not set # CONFIG_IP6_NF_MATCH_OPTS is not set # CONFIG_IP6_NF_MATCH_HL is not set # CONFIG_IP6_NF_MATCH_IPV6HEADER is not set # CONFIG_IP6_NF_MATCH_MH is not set # CONFIG_IP6_NF_MATCH_RT is not set # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=y CONFIG_IP6_NF_FILTER=y CONFIG_IP6_NF_TARGET_REJECT=y # CONFIG_IP6_NF_MANGLE is not set # CONFIG_IP6_NF_RAW is not set CONFIG_BRIDGE_NF_EBTABLES=y CONFIG_BRIDGE_EBT_BROUTE=y CONFIG_BRIDGE_EBT_T_FILTER=y CONFIG_BRIDGE_EBT_T_NAT=y CONFIG_BRIDGE_EBT_802_3=y CONFIG_BRIDGE_EBT_AMONG=y CONFIG_BRIDGE_EBT_ARP=y CONFIG_BRIDGE_EBT_IP=y CONFIG_BRIDGE_EBT_IP6=y CONFIG_BRIDGE_EBT_LIMIT=y CONFIG_BRIDGE_EBT_MARK=y CONFIG_BRIDGE_EBT_PKTTYPE=y CONFIG_BRIDGE_EBT_STP=y CONFIG_BRIDGE_EBT_VLAN=y CONFIG_BRIDGE_EBT_IVLAN=y CONFIG_BRIDGE_EBT_ARPREPLY=y CONFIG_BRIDGE_EBT_DNAT=y CONFIG_BRIDGE_EBT_MARK_T=y CONFIG_BRIDGE_EBT_REDIRECT=y CONFIG_BRIDGE_EBT_SNAT=y CONFIG_BRIDGE_EBT_LOG=y # CONFIG_BRIDGE_EBT_ULOG is not set CONFIG_BRIDGE_EBT_NFLOG=y CONFIG_NF_BL_EXT=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_L2TP=y # CONFIG_L2TP_V3 is not set CONFIG_STP=y CONFIG_BRIDGE=y CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_FP=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=y # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y CONFIG_NET_SCH_DRR=y # CONFIG_NET_SCH_INGRESS is not set # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set CONFIG_NET_CLS_FLOW=y CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=y CONFIG_NET_EMATCH_NBYTE=y CONFIG_NET_EMATCH_U32=y CONFIG_NET_EMATCH_META=y CONFIG_NET_EMATCH_TEXT=y CONFIG_NET_CLS_ACT=y # CONFIG_NET_ACT_POLICE is not set # CONFIG_NET_ACT_GACT is not set # CONFIG_NET_ACT_MIRRED is not set CONFIG_NET_ACT_IPT=y # CONFIG_NET_ACT_NAT is not set # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set # CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_PRIV=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # # # Some wireless drivers require a rate control algorithm # # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set CONFIG_DEBUG_DRIVER=y CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y CONFIG_MTD_SST25L=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set CONFIG_MTD_BLOCK2MTD=y # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set CONFIG_MTD_UBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 CONFIG_MTD_UBI_GLUEBI=y # CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # # DRBD disabled because PROC_FS, INET or CONNECTOR not selected # # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set # CONFIG_RAM_CONSOLE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set # CONFIG_SMSC911X is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_PCH_GBE is not set # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y # CONFIG_ATMEL is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=y # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_VMXNET3 is not set # CONFIG_VBUS_ENET is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # # CONFIG_INPUT is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_PCH_PHUB is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y # CONFIG_SPI_XILINX is not set # CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # # PPS support # # CONFIG_PPS is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_MC13783 is not set # CONFIG_EZX_PCAP is not set # CONFIG_AB4500_CORE is not set # CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_BL_LILAC_USB=y CONFIG_BLUSB_0=y CONFIG_BLUSB_1=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # TI VLYNQ # # CONFIG_STAGING is not set # # Hardware allocator support # # # Hardware queue support # # # Pattern matching support # # CONFIG_PATTERN_MATCHING is not set # # Frame Manager support # # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y # CONFIG_FSNOTIFY is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_INOTIFY_USER is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y CONFIG_CUSE=y CONFIG_GENERIC_ACL=y # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_VFAT_FS_NO_DUALNAMES=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_VFAT_NO_CREATE_WITH_LONGNAMES is not set CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_AXFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_UNION_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_YAFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set CONFIG_UBIFS_FS=y # CONFIG_UBIFS_FS_XATTR is not set CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y CONFIG_SQUASHFS_EMBEDDED=y CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=y # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_DEF_FILE_IO_SIZE=4096 CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS_PATH="/tftpboot/%s" CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_WRNOTE=y # CONFIG_PRINTK_TIME is not set CONFIG_WR_OCD_DEBUG=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=7000 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_PSRWLOCK is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_HAVE_PSRWLOCK_ASM_CALL is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_EARLY_PRINTK is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_RUNTIME_DEBUG=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_MANAGER_TESTS is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # OCF Configuration # # CONFIG_OCF_OCF is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y # CONFIG_SHM_SIGNAL is not set # CONFIG_IOQ is not set
OEM bootlog:
BL LILAC STARTER VER-BCM2.1.11.0 (Jan 20 2014 - 20:23:15) SOC ID: BL_23570 Init DDR3.... 128MB Attempt to boot from NAND... Try to load bootloader from boot bank 0 Bootloader Loaded to DRAM Cache enabled, start bootloader... U-Boot 2010.06 (Oct 18 2013 - 14:09:03 - BCM2.1.11.0) bl_lilac_i2c_init ok! Board: Alcatel-Lucent Shanghai Bell (I-240W-A-B) U-Boot Local version: BCM-2.1.11.0 Chip Version: 00002351 CPU Clock: 497 MHz DDR Clock: 531 MHz RNR Clock: 797 MHz Peripheral BUS Clock: 62 MHz DRAM: 128 MiB Watchdog Input Pin 38 initialized NAND: 128 MiB incorrect device type in reserve_space Creating 1 MTD partitions on "nand0": 0x000000100000-0x000000d00000 : "mtd=1" UBI: attaching mtd1 to ubi0 Volume 0 found at volume id 0 read 12 bytes from volume 0 to 813ffef8(buf address) UBI: mtd1 is detached from ubi0 Creating 1 MTD partitions on "nand0": 0x000000d00000-0x000000f80000 : "mtd=2" UBI: attaching mtd1 to ubi0 Volume 1 found at volume id 1 read 262144 bytes from volume 1 to 817c12a0(buf address) RAM Memory regions: RESERVED: A=0xA6C00000 : S=0x01400000 : (tm) RESERVED: A=0xA6800000 : S=0x00400000 : (mc) RESERVED: A=0xA6600000 : S=0x00200000 : (dsp) USABLE: A=0xA0000000 : S=0x06600000 : (sys_1) Net: Start Initialization NET: MAC configurations: EMAC0, mode = QSGMII NET: MACs configurations: emacs_group_mode = QSGMII, e4mode= NONE ,e0mode = NONE PHY reset:1 - I240WB_I240GD_BOARD Need hardware support NET: RDD version: 9.4.0.4 NET: Data Path successfuly initialized Net: ETHMAC0 Hit any key to stop autoboot: 1 0 bl_lilac_i2c_init ok! isloading image = 1 UBI: mtd1 is detached from ubi0 Creating 1 MTD partitions on "nand0": 0x000001600000-0x000001a00000 : "mtd=5" UBI: attaching mtd1 to ubi0 Volume 0 found at volume id 0 read 0 bytes from volume 0 to 8112b338(buf address) Read [2371091] bytes ## Booting kernel from Legacy Image at 8112b338 ... Image Name: Linux Kernel Image Created: 2014-07-15 12:10:12 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 2371027 Bytes = 2.3 MiB Load Address: 80010000 Entry Point: 80014110 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... Board: Alcatel-Lucent Shanghai Bell (I-240W-A-B) CPU Clock: 497 MHz DDR Clock: 531 MHz RNR Clock: 797 MHz Peripheral BUS Clock: 62 MHz plat_mem_setup Linux version 2.6.34.8-BCM2.1.11.0 (buildmgr@AONT07) (gcc version 4.4.1 (Wind River Linux Sourcery G++ 4.4a-323) ) #1 Tue Jul 15 20:09:55 CST 2014 bl_lilac_i2c_init ok! Watchdog Input Pin 38 initialized Watchdog: Couldn't create proc dir <watchdog> CPU revision is: 0001974c (MIPS 74Kc) Lilac SOC setup Determined physical RAM map: memory: 01400000 @ 06c00000 (reserved) memory: 00400000 @ 06800000 (reserved) memory: 00200000 @ 06600000 (reserved) memory: 06600000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00006600 HighMem empty Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 25908 Kernel command line: ubi.mtd=1 root=ubi0_0 rw rootfstype=ubifs ip=192.168.0.0:192.168.1.22:192.168.2.55:255.255.255.0:::off console=ttyS0,115200 bootversion=Oct-18-2013--14:09:03 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=00000000 Readback ErrCtl register=00000000 Memory: 98136k/104448k available (3857k kernel code, 6312k reserved, 1002k data, 184k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS:256 console [ttyS0] enabled Calibrating delay loop... 248.21 BogoMIPS (lpj=1241088) Mount-cache hash table entries: 512 Init trace_clock_cyc2ns: precalc_mult = 1028, precalc_shift = 8 NET: Registered protocol family 16 registering PCI controller with io_map_base unset check_res_of_trace_clock: sched_clock() low resolution check_res_of_trace_clock: trace_clock_read64_ns() has high resolution initcall check_res_of_trace_clock+0x0/0xfc returned with disabled interrupts bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci 0000:00:00.0: BAR 2: assigned [mem 0x10000000-0x10003fff 64bit] pci 0000:00:00.0: BAR 2: set to [mem 0x10000000-0x10003fff 64bit] (PCI address [0x10000000-0x10003fff] pci 0000:00:00.0: BAR 0: assigned [io 0x13ff0000-0x13ff00ff] pci 0000:00:00.0: BAR 0: set to [io 0x13ff0000-0x13ff00ff] (PCI address [0x13ff0000-0x13ff00ff] Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. MAC configurations: EMAC0, mode = QSGMII MAC configurations: emacs_group_mode = QSGMII, emac_mode = NONE BL lilac ethernet driver initialization: group_mode QSGMII emac_mode NONE macId EMAC0 PHY reset:1 - I240WB_I240GD_BOARD Need hardware support NET: RDD version: 9.4.0.4 Data Path successfuly initialized Watchdog Input Pin 38 initialized Watchdog: Add Proc FS Ok. init_vdso successfull squashfs: version 4.0 (2009/01/31) Phillip Lougher Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/W]. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.13) msgmni has been set to 191 io scheduler noop registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0xb90a0400 (irq = 116) is a 16550A NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD NAND 128MiB 3,3V 8-bit) Boot from NAND FLASH Creating 9 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x000001a00000-0x000004000000 : "rootfs0" 0x000004000000-0x000006600000 : "rootfs1" 0x000000000000-0x000000100000 : "starter" 0x000000100000-0x000000d00000 : "cfg" 0x000000d00000-0x000000f80000 : "uboot0" 0x000000f80000-0x000001200000 : "uboot1" 0x000001200000-0x000001600000 : "linux0" 0x000001600000-0x000001a00000 : "linux1" 0x000006600000-0x000008000000 : "logfs" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 23094 UBI: attached mtd1 to ubi0 UBI: MTD device name: "rootfs1" UBI: MTD device size: 38 MiB UBI: number of good PEBs: 303 UBI: number of bad PEBs: 1 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 8 UBI: total number of reserved PEBs: 295 UBI: number of PEBs reserved for bad PEB handling: 3 UBI: max/mean erase counter: 243/76 UBI: image sequence number: 0 UBI: background thread "ubi_bgt0d" started, PID 193 PPP generic driver version 2.4.2 NET: Registered protocol family 24 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver BLUSB : ehci_hcd_bl_lilac_drv_probe(272): No OverCurrentFeature for USB_0 bl-lilac-ehci bl-lilac-ehci.0: Broadlight USB EHCI Host Controller bl-lilac-ehci bl-lilac-ehci.0: new USB bus registered, assigned bus number 1 bl-lilac-ehci bl-lilac-ehci.0: irq 140, io mem 0x18004000 bl-lilac-ehci bl-lilac-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Broadlight USB EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34.8-BCM2.1.11.0 bl_lilac_ehci usb usb1: SerialNumber: bl_usb_ehci_0 dev_driver_string(dev) usb usb1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected BLUSB : bl_lilac_probe(147): bl_usb_ehci_0 is probed (hcd=0x8607e400) BLUSB : ehci_hcd_bl_lilac_drv_probe(272): No OverCurrentFeature for USB_1 bl-lilac-ehci bl-lilac-ehci.1: Broadlight USB EHCI Host Controller bl-lilac-ehci bl-lilac-ehci.1: new USB bus registered, assigned bus number 2 bl-lilac-ehci bl-lilac-ehci.1: irq 141, io mem 0x18004400 bl-lilac-ehci bl-lilac-ehci.1: USB 2.1 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Broadlight USB EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34.8-BCM2.1.11.0 bl_lilac_ehci usb usb2: SerialNumber: bl_usb_ehci_1 dev_driver_string(dev) usb usb2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected BLUSB : bl_lilac_probe(147): bl_usb_ehci_1 is probed (hcd=0x86223c00) ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver bl-lilac-ohci bl-lilac-ohci.0: Broadlight USB OHCI Host Controller bl-lilac-ohci bl-lilac-ohci.0: new USB bus registered, assigned bus number 3 bl-lilac-ohci bl-lilac-ohci.0: irq 140, io mem 0x18004100 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: Broadlight USB OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.34.8-BCM2.1.11.0 bl_lilac_ohci usb usb3: SerialNumber: bl_usb_ohci_0 dev_driver_string(dev) usb usb3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected BLUSB : bl_lilac_probe(341): bl_usb_ohci_0 is probed (hcd=0x86223400) bl-lilac-ohci bl-lilac-ohci.1: Broadlight USB OHCI Host Controller bl-lilac-ohci bl-lilac-ohci.1: new USB bus registered, assigned bus number 4 bl-lilac-ohci bl-lilac-ohci.1: irq 141, io mem 0x18004500 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: Broadlight USB OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.34.8-BCM2.1.11.0 bl_lilac_ohci usb usb4: SerialNumber: bl_usb_ohci_1 dev_driver_string(dev) usb usb4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected BLUSB : bl_lilac_probe(341): bl_usb_ohci_1 is probed (hcd=0x8622fc00) Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. netem: version 1.2 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1533 buckets, 6132 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered Ebtables v2.0 registered L2TP core driver, V2.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> IP-Config: Gateway not on directly connected network. UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "0" UBIFS: file system size: 35868672 bytes (35028 KiB, 34 MiB, 278 LEBs) UBIFS: journal size: 5031936 bytes (4914 KiB, 4 MiB, 39 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:11. Freeing unused kernel memory: 184k freed logrotate: Logdir /var/log/ missing UBI: attaching mtd3 to ubi1 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 104235 UBI: attached mtd3 to ubi1 UBI: MTD device name: "cfg" UBI: MTD device size: 12 MiB UBI: number of good PEBs: 96 UBI: number of bad PEBs: 0 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 2 UBI: available PEBs: 5 UBI: total number of reserved PEBs: 91 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 1380/1086 UBI: image sequence number: 0 UBI: background thread "ubi_bgt1d" started, PID 237 Algorithmics/MIPS FPU Emulator v1.5 UBI device number 1, total 96 LEBs (12386304 bytes, 11.8 MiB), available 5 LEBs (645120 bytes, 630.0 KiB), LEB size 129024 bytes (126.0 KiB) UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 1, volume 1, name "1" UBIFS: file system size: 6451200 bytes (6300 KiB, 6 MiB, 50 LEBs) UBIFS: journal size: 1290240 bytes (1260 KiB, 1 MiB, 10 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) UBI: attaching mtd8 to ubi5 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 74253 UBI: attached mtd8 to ubi5 UBI: MTD device name: "logfs" UBI: MTD device size: 26 MiB UBI: number of good PEBs: 208 UBI: number of bad PEBs: 0 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 5 UBI: total number of reserved PEBs: 203 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 386/357 UBI: image sequence number: 0 UBI: background thread "ubi_bgt5d" started, PID 251 UBI device number 5, total 208 LEBs (26836992 bytes, 25.6 MiB), available 5 LEBs (645120 bytes, 630.0 KiB), LEB size 129024 bytes (126.0 KiB) UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 5, volume 0, name "0" UBIFS: file system size: 23482368 bytes (22932 KiB, 22 MiB, 182 LEBs) UBIFS: journal size: 3483648 bytes (3402 KiB, 3 MiB, 27 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) insmod ri.ko board_name is I-240W-Ari module insert board_type = 3: I240WA ##fi_mux_connect_pin for i240wa gpio_mgr_init succ mknod: /dev/gpio_mgr_drv: File exists insmod netlinkmsg.ko init netlink in netlinkmsg.ko ####disable usb SWUG: Attaching boot configuration and inactive images UBI: attaching mtd0 to ubi2 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 153 UBI: attached mtd0 to ubi2 UBI: MTD device name: "rootfs0" UBI: MTD device size: 38 MiB UBI: number of good PEBs: 303 UBI: number of bad PEBs: 1 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 8 UBI: total number of reserved PEBs: 295 UBI: number of PEBs reserved for bad PEB handling: 3 UBI: max/mean erase counter: 3/0 UBI: image sequence number: 0 UBI: background thread "ubi_bgt2d" started, PID 286 SWUG: inactive rootfs: mtd0 attached to ubi2 UBI: attaching mtd6 to ubi3 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 23 UBI: attached mtd6 to ubi3 UBI: MTD device name: "linux0" UBI: MTD device size: 4 MiB UBI: number of good PEBs: 32 UBI: number of bad PEBs: 0 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 3 UBI: total number of reserved PEBs: 29 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 2/1 UBI: image sequence number: 0 UBI: background thread "ubi_bgt3d" started, PID 299 SWUG: inactive kernel: mtd6 attached to ubi3 UBI: attaching mtd4 to ubi4 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 18 UBI: attached mtd4 to ubi4 UBI: MTD device name: "uboot0" UBI: MTD device size: 2 MiB UBI: number of good PEBs: 20 UBI: number of bad PEBs: 0 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 2 UBI: available PEBs: 3 UBI: total number of reserved PEBs: 17 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 3/1 UBI: image sequence number: 0 UBI: background thread "ubi_bgt4d" started, PID 311 SWUG: prepare uboot0: mtd4 attached to ubi4 UBI: attaching mtd5 to ubi6 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 0 UBI: attached mtd5 to ubi6 UBI: MTD device name: "uboot1" UBI: MTD device size: 2 MiB UBI: number of good PEBs: 20 UBI: number of bad PEBs: 0 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 2 UBI: available PEBs: 3 UBI: total number of reserved PEBs: 17 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 1/0 UBI: image sequence number: 0 UBI: background thread "ubi_bgt6d" started, PID 326 SWUG: prepare uboot1: mtd5 attached to ubi6 ### Active Image ### Image 1, Version : 00000010 00000000 3FE54869ACEC29 bl_lilac_i2c_init ok! BOSA Address: 0X9C optical_device_type = 1: BOSA_ON_BOARD Init BOSA by RI... Init BOSA by RI ok! BOSA init done soc_sfp_driver: exports duplicate symbol Opt_Tx_power_ctrl (owned by bosa) insmod: can't insert './soc_sfp_driver.ko': invalid module format init realtek phy BL_WATCHDOG driver is installed successfully! Starting Dropbear SSH server: Generating syslog.conf syslogd starting klogd starting dropbear. onu_type="HGU" the operatorid =PTXX open led0 release led dev the base mac addr=54:a6:XX:XX:XX:XX Stratosphere initiated success GateMakerPro: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint Created on Jul 15 2014 at 20:10:42 Compilation flags used: USE_SHELL INCLUDE_LOGS USE_LOGGER USE_SRT Machine session started. ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]] ]]] ]]]]]]]] ]]]] ]]]] ]]]]]]]]]]]]]]] ]]] ]]]]]] ]]]] ]]]] ]]]]]]]]]]]]]]] ]]]] ]]]]] ]]]] ]]]] ]]]]]]]]]]]]]]] ]]]]]]]]] ] ] ]]]]]]] ]]]] ]]]] ]]]]]]]]]]]]]]]] ]]]] ]]] ]]]] ]] ]]]] ]]]] ]]]]]]]]]]]]]]]]]]]]] ]]] ]]]]]] ]]]] ]] ]]]] ]]]] ]]]]]]]]]]]]]]]] ]]] ] ]]]] ]]]]]]]] ]]]] ]]]] ]]]]]]]]]]]]]]] ]]] ] ]]]] ]]]] ]]]] ]]]] ]]]]]]]]]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]]] ]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Target Operational & Debug Shell ]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]] Version: 3.4.1 ]]]]]]]]]]]]]]]]]]]]]]]]]] BroadLight(C) ]]]]]]]]]]]]]]]]]]]]]]]]] Welcome to SHELL, use (?) help to get started. >>> Session [224] is started STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=0 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=1 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_api_cfg_ds_subnet_classify_method' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) Board configuration from GMP: gpon <1> wan_emac_id <5> emacs_enabled <111111> in bl_netdev_init, 2866 lilac netdev. ver 10.0.2. compiled Jul 15 2014 , 20:10:50 with netfilter support Hello from lilac network device Unsupported by bl_lilac_get_port_type function MAC number(4) bl_lilac_get_port_type - BUG Unsupported by bl_lilac_get_port_type function MAC number(4) bl_lilac_get_port_type - BUG Unsupported by bl_lilac_get_port_type function MAC number(5) bl_lilac_get_port_type - BUG Unsupported by bl_lilac_get_port_type function MAC number(6) bl_lilac_get_port_type - BUG Unsupported by bl_lilac_get_port_type function MAC number(7) bl_lilac_get_port_type - BUG Unsupported by bl_lilac_get_port_type function MAC number(8) bl_lilac_get_port_type - BUG Unsupported by bl_lilac_get_port_type function MAC number(9) bl_lilac_get_port_type - BUG init queue 3 Implementing NAPI WITH Shared buffers RTL8192C/RTL8188C driver version 1.6 (2011-07-18/2013-02-20) =====>>INSIDE rtl8192cd_init_one <<===== PCI: Enabling device 0000:00:00.0 (0000 -> 0003) correcting to 32 =====>>EXIT rtl8192cd_init_one <<===== =====>>INSIDE rtl8192cd_init_one <<===== =====>>EXIT rtl8192cd_init_one <<===== =====>>INSIDE rtl8192cd_init_one <<===== =====>>EXIT rtl8192cd_init_one <<===== =====>>INSIDE rtl8192cd_init_one <<===== =====>>EXIT rtl8192cd_init_one <<===== =====>>INSIDE rtl8192cd_init_one <<===== =====>>EXIT rtl8192cd_init_one <<===== auto autorate emac ID: 3 phy changed: rate 2 wifi MW dev initialized Wifi Middleware Device v.2.13 initialized ! timer = 500, threshold = 127 number_of_packets_to_read = 64 number_of_queues = 1 emac ID: 1 phy changed: rate 2 STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=2 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=7 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=6 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=3 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) lilac bridge fastpath ver 10.0.2. compiled Jul 15 2014 , 20:10:50 UT: Invoking function 'bl_api_cfg_local_ip_address' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_api_ctrl_local_ip_filter' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) Add IP subnet(4) failed. ERROR 34lilac netfilter fastpath. ver 10.0.2. compiled Jul 15 2014 , 20:10:50 insmod: rgw arp v.1.0.0 RGW_ARP -------------------- Dynamic configuration -------------------- 0 RGW_ARP Log is [OFF] RGW_ARP --------------------------------------------------------------- 0 entering dspforward_load.sh existing dspforward_load.sh dmm_shw_db_init dmm_cfg_db_init dmm_int_db_init BlDrvInit... Wan intreface = CE_BL_WAN_INTERFACE_GPON init success... DP_RM driver is installed successfully! UT: Invoking function 'bl_api_cfg_tpid' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_api_cfg_add_always_vlan_action_tpid' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_api_add_ip_subnet' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=4 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) STARTUP: Invoking p_startup_ctrl_gmp_action_command type=HGUPTXX action=5 case_id=0 STARTUP: returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_dmm_configure_emac_mgmt_domain' UT: Function returns ''(0) UT: Invoking function 'bl_dmm_configure_emac_mgmt_domain' UT: Function returns ''(0) UT: Invoking function 'bl_dmm_configure_emac_mgmt_domain' UT: Function returns ''(0) UT: Invoking function 'bl_dmm_configure_emac_mgmt_domain' UT: Function returns ''(0) UT: Invoking function 'bl_dmm_configure_emac_mgmt_domain' UT: Function returns ''(0) UT: Invoking function 'bl_dmm_configure_emac_mgmt_domain' UT: Function returns ''(0) IPTV Filter mode changed to 5 IPTV Filter mode changed to 3 successfully insert igmp dev module UT: Invoking function 'bl_api_ctrl_igmp_filter' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_api_modify_gpon_link_cfg' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_api_cfg_us_eth_flow_classify_method_per_lan_port' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) [INIT] app starting... Sun Dec 6 21:27:05 2015 DB check... not first boot. no need DB migration. --Voice upgrade handle: No---Loading config from file /configs/config.cfg ### Load config success ### [INIT] start init RG slow path. isHGU:1,numPort: 4 max port num: 4exchangeVlanActionMode: the tag mode not support<DrvMapDmmDsEthFlow2RateController() failed, ret = 168 0>,use eVLAN_TAG_ACTION_TRANSPARENT exchangeVlanActionMode: the tag mode not support<0>,use eVLAN_TAG_ACTION_TRANSPARENT brctl: bridge br0: File exists brctl: bridge br0: Device or resource busy brctl: bridge br0: Device or resource busy brctl: bridge br0: Device or resource busy brctl: iface wLan: No such device exchangeVlanActionMode: the tag mode not support<0>,use eVLAN_TAG_ACTION_TRANSPARENT exchangeVlanActionMode: the tag mode not support<0>,use eVLAN_TAG_ACTION_TRANSPARENT exchangeVlanActionMode: the tag mode not support<0>,use eVLAN_TAG_ACTION_TRANSPARENT [INIT] exit init RG slow path ledLighting_thread pid=0. create_lan_stats_thread id = 750789792 lan_stats_thread pid = 854 get_device_identity ALCLFAD2D8B0 configProductNameOnBoot: open /dev/net_phy failed, error = 2 Cann't open file [INIT] start init LAN IP or mask changed! rm: cannot remove '/tmp/cgi_session': No such file or directory rutLan_dealStaticDnsCfg begin. pid_fd 8 pid==895 Line 1257 get_options D Home Line 1269 get_options v 0 Line 0 get_options 10 Line 1242 get_options \FF (null) dnsproxy pid 897 >>>>>>>>>>>>>>>>>>>>@start Voice@>>>>>>>>>>>>>>>>>>> DSP: PACKAGE_NAME=VoIPerfect.10.1.M7.FW.5.08.P02.SLIC.2.17.1 DSP: BUILD_INFO=10.1.M7.v2.1.10.0.11112012.1647@juno BY kirill DSP_Init_Phase1 f_tdm_muxing tdm pinmux by mml f_tdm_muxing OK f_dsp_pins OK f_dsp_boot_address OK DSP BOOT ADDR DRV:0xA6600000 DSP:0x16605000 f_init_ahb_bridge OK DSP_Init_Phase1 complete 0:OK!! krtp_init to insert hal_cslac_api2_drv.ko, partNumer=3FE54945 init_cslac_spi_attr, 53: slic device [0] is configured as SPI slave SPI_cfg(124) Cherry board SPI_cfg complete OK id:0 cs:40 init_cslac_spi_attr, 53: slic device [1] is configured as SPI slave SPI_cfg(124) Cherry board SPI_cfg complete OK id:1 cs:40 init_cslac_spi_attr: finished successly... entering init_cslac_event_handlers: init event_response_handlers init event response handler for VP_DEV_EVID_DEV_INIT_CMP with index [10] init event response handler for VP_LINE_EVID_RD_OPTION with index [4] init event response handler for VP_EVID_CAL_CMP with index [6] [INIT] start init DosProtection CSLAC driver is installed successfully! cp: cannot stat '/usr/etc/alcatel/config/vpp_tr69': No such file or directory ====================@Voice started@================= open led0 release led dev UT: Invoking function 'bl_api_cfg_ds_ip_l4_protocol_filter' UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) UT: Invoking function 'bl_api_cfg_cpu_reason_to_cpu_queue' reason = wan_l4_protocol_non_tcp_udp (61) UT: Function returns 'No error (CE_BL_NO_ERROR)' ( 0 ) DosProtection enableset obc limitation successful[INIT] exit init DosProtection BROADLIGHT Lilac Linux (FS version 2.0.85.2, issue 2011-07-17-232953-juno) Kernel 2.6.34.8-BCM2.1.11.0 #1 Tue Jul 15 20:09:55 CST 2014 192.168.0.0 login: common_pools: need 468528 bytes memory msgbuf_pool_appl: need 325556 bytes memory Get VOIP cfg type: OMCIV1UserAgentPort=5060 liuchi Get VOIP cfg type: OMCIV1localPortMin=22456 localPortMax=32456 liuchi rut_setNtpclientPort:L351 [[1;35mERROR[0m]: can not open file ntpclient_port Get VOIP cfg type: OMCIV1UserAgentPort=5060 liuchi Get VOIP cfg type: OMCIV1localPortMin=22456 localPortMax=32456 liuchi rut_setNtpclientPort:L351 [[1;35mERROR[0m]: can not open file ntpclient_port [INIT] exit init LAN [INIT] start init VlanInfo [INIT] exit init VlanInfo [INIT] start init WAN nr_commands=0,max_links=200 nr_commands=1,max_links=200 nr_commands=2,max_links=200 nr_commands=3,max_links=200 /configs/alcatel/config/cvpd.cmd not found. SipwStartup, fetched maxPrtZips=2 nr_commands=4,max_links=200 nr_commands=5,max_links=200 GVHW initialization, current maxlines 2 is nr_commands=6,max_links=200 acGatewayAPI version is: 1.0.2_build_17 DSP Version:BL4289.TKL2.D16.I16.T2.FW.5.07.P02.1 Waiting for DSP init... f_dsp_start_ceva f_dsp_init_phase2 complete f_dsp_sync_ceva <<< f_dsp_sync_ceva >>> complete DSP_Init_Phase2 complete DSP packet recording init..passed Setup device 0..passed cslac_open: entry Start hisi timer:0 len:10 nr_commands=7,max_links=200 nr_commands=8,max_links=200 #sipcommon_root open led0 start #vm start #linetest start [SLID]: SLIDoBUTT init start! [SLID]: SLIDoBUTT main task started.[TaskId]=11 dytest status=0 nr_commands=9,max_links=200 [sys] yapi registerContainer(cid): 4 nr_commands=10,max_links=200 nr_commands=11,max_links=200 nr_commands=12,max_links=200 nr_commands=13,max_links=200 DBG sal_qos_update_wan_info:add_rem=1 vid=111 pbit=0 wan_name= Usage: upnpd [-f] <external ifname> <internal ifname> -f don't daemonize Example: upnpd ppp0 eth0 cvp_proxy_obj_fwd: cvp not initialized! tempname/filename is: /etc/ppp/options_ppp111. DBG sal_qos_update_wan_info:add_rem=1 vid=881 pbit=0 wan_name=ppp111 Usage: upnpd [-f] <external ifname> <internal ifname> -f don't daemonize Example: upnpd ppp0 eth0 [INIT] exit init WAN getNumOfBridgePort portID:1, ethEntry.isTr069Domain: 1 getNumOfBridgePort portID:2, ethEntry.isTr069Domain: 1 getNumOfBridgePort portID:3, ethEntry.isTr069Domain: 1 getNumOfBridgePort portID:4, ethEntry.isTr069Domain: 0 cfg_bootWlan 100mw [INIT] start init WLAN isHGU:1 numPort:1 isEnter: 0 0 0 0 auto autorate cmd is: ebtables -D FORWARD -i wifi_fp6 -o eth0 -j DROP Sorry, rule does not exist. cmd is: ebtables -D FORWARD -i wifi_fp6 -o eth1 -j DROP Sorry, rule does not exist. cmd is: ebtables -D FORWARD -i wifi_fp6 -o eth2 -j DROP Sorry, rule does not exist. cmd is: ebtables -A FORWARD -i wifi_fp6 -o eth3 -j DROP cmd is: ebtables -A FORWARD -i wifi_fp6 -o eth4 -j DROP cmd is: ebtables -D FORWARD -i wifi_fp6 -o wifi_fp0 -j DROP Sorry, rule does not exist. cmd is: ebtables -D FORWARD -i wifi_fp6 -o wifi_fp1 -j DROP Sorry, rule does not exist. cmd is: ebtables -D FORWARD -i wifi_fp6 -o wifi_fp2 -j DROP Sorry, rule does not exist. cmd is: ebtables -D FORWARD -i wifi_fp6 -o wifi_fp3 -j DROP Sorry, rule does not exist. wpa_wpa2_mixed authenticationshare IRQ 130/wlan0: IRQF_DISABLED is not guaranteed on shared IRQs [PHY_ConfigMACWithParaFile][MACPHY_REG_92C] ===> Load_92C_Firmware <=== Load_92C_Firmware cat: can't open '/tmp/rtl8192c/repeater_enabled': No such file or directory iwpriv path is /root/wifi/auth flash path is /root/wifi/flash iwcontrol path is /iwpriv wscd path is /iwpriv wscd path is /root/wifi/simplecfgservice.xml wscd path is /root/wifi/wscd.conf EXIT cfg_bootWLAN. be ready to init the FUNC:[cfg_bootIGMP()] ret = 0 [1423] retIgmpInit was already done. = 0 [1431] ret = 0 [1441] type 10000269 src 24 dst 114 ret = 0 [1444] hal_igmp_set_ds_mcast_vlan mc_vlan=110 init the FUNC:[cfg_bootIGMP()] success. @@@ idx=0,vid=881,rcid=255,ethid=3,gemflow=65535 @@@ DrvMapDmmDsEthFlow2RateController() failed, ret = 168 @@@:SAL F:[TcPathPair DrvConfigDsVlanActionPerLanPort() failed, ret = 185 ] L:[33 ] | ItfHwLan.cpp:[33] Untagged Lan. portId:0 @@@:SAL F:[TcPathPair ] L:[33 ] | ItfHwLan.cpp:[33] Untagged Lan. portId:1 @@@:SAL F:[TcPathPair ] L:[33 ] | ItfHwLan.cpp:[33] Untagged Lan. portId:2 @@@:SAL F:[TcPathPair ] L:[33 ] | ItfHwLan.cpp:[33] Untagged Lan. portId:6 open io0 DBG sal_qos_update_wan_info:add_rem=1 vid=881 pbit=0 wan_name=ppp111 Plugin /usr/lib/pppd/2.4.5/rp-pppoe.so loaded. RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 be ready to init the FUNC:[cfg_bootMacfilter()] DrvCfgUsL2Acl() failed, ret = 305 DrvCfgUsL2Acl() failed, ret = 305 DrvCfgUsL2Acl() failed, ret = 305 DrvCfgUsL2Acl() failed, ret = 305 init the FUNC:[cfg_bootMacfilter()] success. [INIT] start init CFG_IPFILTER [INIT] exit init CFG_IPFILTER [INIT] start init Urlfilter insmod: can't insert '/lib/modules/2.6.34.8-BCM2.1.11.0/ip_tables.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.34.8-BCM2.1.11.0/iptable_filter.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.34.8-BCM2.1.11.0/iptable_nat.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.34.8-BCM2.1.11.0/ip_queue.ko': No such file or directory [INIT] exit init Urlfilter [INIT] start init MWband insmod: can't insert '/lib/driver/mwbind.ko': No such file or directory [INIT] exit init MWband [INIT] start init TdmApp [INIT] exit init tdmApp [INIT] start init parser [INIT] exit init parser [INIT] start init omci /sbin/tdmApp not exist, exit here Get VOIP cfg type: OMCIV1 cfg_bootomciMgr: VOICE is configured as OMCIV1 manually [INIT] exit init omci Function cfg_bootCTUPnP() is called [INIT] start init ftp socket: Protocol not supported nl_init failed!!! killall: utelnetd: no process killed sh: addgroup: not found Password for 'admin' changed telnetd: starting port: 23; interface: any; login program: /bin/login killall: vsftpd: no process killed sh: addgroup: not found Password for 'admin' changed ================ AP SCORE ================ 0 0 0 0 0 0 0 0 0 0 0 ========================================== ================ FA COUNT ================ 58 87 112 104 116 100 1406 200 1006 385 105 ================ mac_rx_count ================ 0 0 0 0 0 0 0 0 2 1 13 ========================================== For each channel, Caculate score with MAC rx counter and FA counter ================ AP SCORE after first round================ 58 87 112 104 116 110 1429 292 1152 530 262 ========================================== ================ Mac_rx_count_40M ================ 0 0 0 8 45 40 12 4 14 0 0 ========================================== Caculate score with MAC 40M_rx counter ================ AP SCORE after second round================ 629 814 973 1131 1232 1229 2532 1297 2071 1281 700 ========================================== The Minimum Score=629,so choose the Channel 1 [INIT] start init Tr069 parser debug thread: id = 743163040 listen_thread created, pid = 1655 trc_register: level: 0 OMCI_LIB:Parser:Getting OMCI msg queue Id [INIT] start init ntp into ppp while arpwan main:arpwan heartbeat is running ... killall: ntpclient: no process killed sh: /sbin/ntp_tz.sh: not found [INIT] exit init ntp [INIT] start init sip voice Get VOIP cfg type: OMCIV1 cvp_proxy_init: tr69(voip) is disabled on SFU [INIT] exit init sip voice [INIT] start init static route boot the DDNS-Client. trc_register: level: 0 [INIT] exit init static route libONU_GetGPONType :cfg_getOnuType succ <type=HGU> libONU_EthPortType :cfg_getEthPortType succ: port<1>,isTr069Domain<1> libONU_EthPortType :cfg_getEthPortType succ: port<2>,isTr069Domain<1> libONU_EthPortType :cfg_getEthPortType succ: port<3>,isTr069Domain<1> libONU_EthPortType :cfg_getEthPortType succ: port<4>,isTr069Domain<0> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.5. libONU_EthPortType :cfg_getEthPortType failled,port<5> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.6. libONU_EthPortType :cfg_getEthPortType failled,port<6> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.7. libONU_EthPortType :cfg_getEthPortType failled,port<7> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.8. libONU_EthPortType :cfg_getEthPortType failled,port<8> DrvConfigBridgePortCfg() failed, ret = 187 DrvConfigBridgePortCfg() failed, ret = 185 [PwrShedding]: sal_initPwrShedding starts qos_bl_init_tc_method is called libONU_GetGPONType :cfg_getOnuType succ <type=HGU> i_bl_init_system_type system is HGU libONU_EthPortType :cfg_getEthPortType succ: port<1>,isTr069Domain<1> libONU_EthPortType :cfg_getEthPortType succ: port<2>,isTr069Domain<1> libONU_EthPortType :cfg_getEthPortType succ: port<3>,isTr069Domain<1> libONU_EthPortType :cfg_getEthPortType succ: port<4>,isTr069Domain<0> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.5. libONU_EthPortType :cfg_getEthPortType failled,port<5> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.6. libONU_EthPortType :cfg_getEthPortType failled,port<6> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.7. libONU_EthPortType :cfg_getEthPortType failled,port<7> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.8. libONU_EthPortType :cfg_getEthPortType failled,port<8> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.9. libONU_EthPortType :cfg_getEthPortType failled,port<9> i_bl_init_lan_port_type lan type is 2 2 2 1 1 i_bl_init_us_tc_method is called with system_type=2 i_bl_init_ds_tc_method is called with system_type=2 CUSTOMER ID :(0) libONU_GetGPONType :cfg_getOnuTyopen led0 pe succ <type=HGU> setFactoryDefaults-stageEnd CUSTOMER ID :(0) ConvLayer: enter omci_cvp_proxy_init. ConvLayer: ONU works with OMCI mode. getCvpQid: cvpQ message queue [163845] has been created omci_cvp_proxy_init: g_vppQ message queue [327690] has been created omci_cvp_proxy_init: register GMI: CVP ********event message queue has been created omci_cvp_proxy_inopen led0 it: g_eventQ message queue [360459] has been created omci_cvp_proxy_init: register GMI: CVP for alarm cvp_proxy_adpt_reg success, QRegResp->result=0! cvp initialized report received:succeeded! omci_cvp_proxy_init: ********initialized success preconfigProfilePath: /configs/alcatel/config/ftpprofile.xml Send notify: MSG_CVP_FILEDOWNLOADED_NOTIFY_REQ. path:/configs/alcatel/config/ftpprofile.xml g_cvpQ: 163845 ipc_rcv_waiti: Warning, data may be truncated, size =33, len=112 ~~~ Send voice profile notify message error .OMCI_CVP_PROXY_INIT_SUCCESS Error: OmciMain failed to get the CVP qid: ftok() returned -1 start cached_message_proc! start download_ftpprofile_proc! *********************Error Print**************************** Type :1 Class :0 Function :VM File :/repo/buildmgr/AONT_CI_REPO/AONT_R2.4.2_MAINT/apps/private/appkgs/voip/dsl/source13/VoiceComPack/VoIPMgnt/src/profile/vm_cvp_download_notify.cpp Line :45 Call Stack: Error Info:vendorProfile = /configs/alcatel/config/ftpprofile.xml *********************************************************** nr_commands=14,max_links=200 onHookFskLevelAdjust = 0 slicGain = -6 ========== fgMethod = 1, hbMode =0, fgIntv = 300, bgIntv = 0, passiveFgIntv = 0 dhcpResult valid field: 0 dhcpResult default next hop: 0 dhcpResult voipClientIpAddr: 1000000 dhcpResult subnetmask: 0 dhcpResult ftpServerIpAddr: 0 dhcpResult primaryDnsServerIpAddr: 0 dhcpResult secondaryDnsServerIpAddr: 0 init queue failed: queueId=0x13dinit queue failed: queueId=0x13einit queue failed: queueId=0x13finit queue failed: queueId=0x140init queue failed: queueId=0x141init queue failed: queueId=0x142init queue failed: queueId=0x143[PwrShedding]: update PwrShedding Parameters [PwrShedding] dataPwrShedTime is <0>,cesPweshedTime is <0>,voicePwrTime is <0>,restoreTime is <0> open io0 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=0 dot1x_enable=0 action_register=3 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=1 dot1x_enable=0 action_register=3 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=2 dot1x_enable=0 action_register=3 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=3 dot1x_enable=0 action_register=3 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=4 dot1x_enable=0 action_register=3 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=5 dot1x_enable=0 action_register=3 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=6 dot1x_enable=0 action_register=3 ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=7 dot1x_enable=0 action_register=3 OMCI_LIB: VOIP: indexID: 2 OMCI_LIB: No of voip ports after assignment is :2 total no of ports in pots sub card 11 POTS_PORT found with instance ID=513--port no=9 UNI-G auto created for POTS UNI with port num=:9 POTS_PORT found with instance ID=514--port no=10 UNI-G auto created for POTS UNI with port num=:10 BOSA module access OK! phy0 id test success phy1 id test success phy2 id test success phy3 id test success wifi chip test success bc,0 slac chip test success BOSA module access OK! phy0 id test success phy1 id test success phy2 id test success phy3 id test success wifi chip test success 3,2 slac chip test success UDPManagerPortInit: portStart =5000, portNum=100 currentParams.DSP packet recording init..CallProgressTonepassed s[0].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[1],toneId[0] ======= currentParams.CallProgressTones[1].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[2],toneId[1] ======= currentParams.CallProgressTones[2].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[3],toneId[2] ======= currentParams.CallProgressTones[3].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[4],toneId[3] ======= currentParams.CallProgressTones[4].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[5],toneId[4] ======= currentParams.CallProgressTones[5].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[6],toneId[5] ======= currentParams.CallProgressTones[6].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[7],toneId[6] ======= currentParams.CallProgressTones[7].ToneALevel=2 =======configSimpleTone:NumberOfCallProgressTones[8],toneId[7] ======= acGatewayAPI version is: 1.0.2_build_17 Setup device 0..passed convertSIP2CVPPotsSetSubscriber set line: 1g_cvpQ: 163845 ipc_rcv_waiti: Warning, data may be truncated, size =112, len=116 ~~~nr_commands=15,max_links=200 onHookFskLevelAdjust = 0 slicGain = -6 g_cvpQ: 163845 UDPManagerPortInit: portStart =5000, portNum=100 convertSIP2CVPPotsSetSubscriber set line: 2g_cvpQ: 163845 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> omcimain stage20 OMCI_LIB:Voip Message sent with ID :853968 OMCI_LIB:registerReqMsg.msgQid:458766 OMCI_LIB:registerReqMsg.adptIndex:0 UDPManagerPortInit: portStart =5000, portNum=100 OMCI_LIB: Failed to send msg!! Error=22,Invalid argument;task_pid=1668;destQid=-1; msgSize=8;msgId=1g_cvpQ: 163845 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! OMCI_LIB:Parser:Got Mgr QID OMCI_LIB: Got swImageInfo = 1c, standby = 0 OMCI_LIB: About to start calling getMessageFromOLT() get slid pwd: 44454641554c54000000 bl_GetPloamTypeAndData::eOG_PAL_PLOAM_CONFIGURE_PORT_ID deal portId=ffff status=1 [bl_PloamHandlerConfPortIdHandle] CONFIGURE PORT ID =65535 ,Status =1. bl_PloamHandlerConfPortIdHandle::do noting libONU_GetGPONType :cfg_getOnuType succ <type=HGU> testDDR: ret = 0 connId = -1 OG_DRV_IOC_WRITE failed: 1 [bl_PloamHandler] DACT ONU. Serial number from OLT: 41 4C 43 4C FA D2 D8 B0 Serial number in hgu locally: 41 4C 43 4C FA D2 D8 B0 [bl_PloamHandleAssignOnuId] ASSIGN ONU ID 16. libONU_GetGPONType :cfg_getOnuType succ <type=HGU> get queue id:/configs/alcatel/config/vpp_event getQidForEventMgr: message queue [360459] has been created testDDR: ret = 0 connId = -1 gvhw_disable_slid_cmd: Disable SLID for debug! receive FIBER_STATUS_NOTIFY. bl_GetPloamTypeAndData::eOG_PAL_PLOAM_CONFIGURE_PORT_ID deal portId=11 status=0 [bl_PloamHandlerConfPortIdHandle] CONFIGURE PORT ID =17 ,Status =0. create OMCI channel[flow id:0, tcontId:0 tcont queue id:0, gem port17, isEncry:0, priority queue:0] [PLOAM] ioctl(CREATE_OMCI_CHANNEL) ret = 0. bl_GetPloamTypeAndData::eOG_PAL_PLOAM_CONFIGURE_PORT_ID deal portId=11 status=0 [bl_PloamHandlerConfPortIdHandle] CONFIGURE PORT ID =17 ,Status =0. bl_PloamHandlerConfPortIdHandle::do noting bl_GetPloamTypeAndData::eOG_PAL_PLOAM_CONFIGURE_PORT_ID deal portId=11 status=0 [bl_PloamHandlerConfPortIdHandle] CONFIGURE PORT ID =17 ,Status =0. bl_PloamHandlerConfPortIdHandle::do noting [PLOAM] EncrPortId GemPortId<17>, EncyMode<0> [PLOAM] EncrPortId GemPortId<17>, EncyMode<0>,GemFlowId<255> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<17>, EncyMode<0> [PLOAM] EncrPortId GemPortId<17>, EncyMode<0>,GemFlowId<255> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<17>, EncyMode<0> [PLOAM] EncrPortId GemPortId<17>, EncyMode<0>,GemFlowId<255> [PLOAM] EncyMode no changed, do nothing hal_config_olt_info:olt_type = FTTU libONU_GetGPONType :cfg_getOnuType succ <type=HGU> power down mode >>>sal_PortAdminStateChangeNotify, port<0> admin state is locked Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=0 dot1x_enable=0 action_register=3 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> power down mode >>>sal_PortAdminStateChangeNotify, port<1> admin state is locked Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=1 dot1x_enable=0 action_register=3 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> power down mode >>>sal_PortAdminStateChangeNotify, port<2> admin state is locked Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=2 dot1x_enable=0 action_register=3 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> power down mode >>>sal_PortAdminStateChangeNotify, port<3> admin state is locked Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=3 dot1x_enable=0 action_register=3 Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=4 dot1x_enable=0 action_register=3 get wlanobj success, status before : 0 get wlanobj success, status after: 0 isEnter: 0 0 0 0 IRQ 130/wlan0: IRQF_DISABLED is not guaranteed on shared IRQs [PHY_ConfigMACWithParaFile][MACPHY_REG_92C] ===> Load_92C_Firmware <=== Load_92C_Firmware Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=5 dot1x_enable=0 action_register=3 Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=6 dot1x_enable=0 action_register=3 Setting Uni Dot1x parameters ERR sal_config_port_802_1x_action:do not support 802_1x feature port_id=7 dot1x_enable=0 action_register=3 [PwrShedding]: update PwrShedding Parameters [PwrShedding] dataPwrShedTime is <0>,cesPweshedTime is <0>,voicePwrTime is <0>,restoreTime is <0> OMCIItf: Mib Interface: 35 is NULL SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! ================ AP SCORE ================ 0 0 0 0 0 0 0 0 0 0 0 ========================================== ================ FA COUNT ================ 129 157 125 161 71 242 979 126 693 144 248 ================ mac_rx_count ================ 0 0 0 0 0 0 0 0 2 3 4 ========================================== For each channel, Caculate score with MAC rx counter and FA counter ================ AP SCORE after first round================ 129 157 125 161 71 252 1012 191 776 228 333 ========================================== ================ Mac_rx_count_40M ================ 0 0 0 0 0 0 2 4 5 0 0 ========================================== Caculate score with MAC 40M_rx counter ================ AP SCORE after second round================ 129 167 159 228 152 341 1113 294 880 323 420 ========================================== The Minimum Score=129,so choose the Channel 1 handleMibUploadNext : No mibs to upload [PLOAM] EncrPortId GemPortId<17>, EncyMode<0> [PLOAM] EncrPortId GemPortId<17>, EncyMode<0>,GemFlowId<255> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<17>, EncyMode<0> [PLOAM] EncrPortId GemPortId<17>, EncyMode<0>,GemFlowId<255> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<17>, EncyMode<0> [PLOAM] EncrPortId GemPortId<17>, EncyMode<0>,GemFlowId<255> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<270>, EncyMode<0> [PLOAM] EncrPortId GemPortId<270>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<270>, EncyMode<0> [PLOAM] EncrPortId GemPortId<270>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPogpon0: open, queue = 6. rtId GemPortId<270>, EncyMode<0> [PLOAM] EncrPortId GemPortId<270>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<281>, EncyMode<0> [PLOAM] EncrPortId GemPortId<281>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<281>, EncyMode<0> [PLOAM] EncrPortId GemPortId<281>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<281>, EncyMode<0> [PLOAM] EncrPortId GemPortId<281>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing hal_config_olt_info:olt_type = ISAM [PLOAM] EncrPortId GemPortId<270>, EncyMode<0> [PLOAM] EncrPortId GemPortId<270>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<270>, EncyMode<0> [PLOAM] EncrPortId GemPortId<270>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<270>, EncyMode<0> [PLOAM] EncrPortId GemPortId<270>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<281>, EncyMode<0> [PLOAM] EncrPortId GemPortId<281>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<281>, EncyMode<0> [PLOAM] EncrPortId GemPortId<281>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<281>, EncyMode<0> [PLOAM] EncrPortId GemPortId<281>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<280>, EncyMode<0> [PLOAM] EncrPortId GemPortId<280>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<280>, EncyMode<0> [PLOAM] EncrPortId GemPortId<280>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<280>, EncyMode<0> [PLOAM] EncrPortId GemPortId<280>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing GemCtp::m_trafficManagement = 2 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! libONU_GetGPONTimeEnable:<1> lib_configpppoeauth:Setting password to PPPoE WAN lib_configpppoeauth:<password:XJTEPE30IS>, <authInfo :XJTEPE30IS> success DBG sal_qos_update_wan_info:add_rem=1 vid=881 pbit=0 wan_name=ppp111 into ppp while killall: ntpclient: no process killed rut_setNtpclientPort:L351 [[1;35mERROR[0m]: can not open file ntpclient_port rm: cannot remove '/tmp/ntpclient_port': No such file or directory cmd_timezone is cp /usr/share/zoneinfo/GMT+07:0 /etc/localtime bind INADDR_ANY time.nist.gov: Host name lookup failure select time.nist.gov error ntp1.tummy.com: Host name lookup failure select ntp1.tummy.com error !!!!!select ntp server error set InternetGatewayDevice.Time.LocalTimeZone=+07:0 success! libONU_GetGPONTimeEnable:<1> lib_configpppoeauth:Setting password to PPPoE WAN lib_configpppoeauth:<password:XJTEPE30IS>, <authInfo :XJTEPE30IS> success DBG sal_qos_update_wan_info:add_rem=1 vid=881 pbit=0 wan_name=ppp111 into ppp while msgmgr:error:71oalMsg_receive:259:read failed, pid=849 fd=17 rc:[0], errno:[2][No such file or directory]. msgmgr:error:71process_event:263:close for disconnect error on read from fd 17 for ntpclient cmd_timezone is cp /usr/share/zoneinfo/GMT+07:0 /etc/localtime bind INADDR_ANY time.nist.gov: Host name lookup failure select time.nist.gov error ntp1.tummy.com: Host name lookup failure select ntp1.tummy.com error !!!!!select ntp server error set InternetGatewayDevice.Time.LocalTimeZone=+07:0 success! libONU_GetGPONTimeEnable:<1> cmd is: ebtables -F FORWARD cmd is: ebtables -A FORWARD -i eth3 -o eth0 -j DROP cmd is: ebtables -A FORWARD -i eth3 -o eth1 -j DROP cmd is: ebtables -A FORWARD -i eth3 -o eth2 -j DROP cmd is: ebtables -A FORWARD -i eth3 -o eth4 -j DROP cmd is: ebtables -A FORWARD -i eth3 -o wifi_fp0 -j DROP cmd is: ebtables -A FORWARD -i eth3 -o wifi_fp1 -j DROP cmd is: ebtables -A FORWARD -i eth3 -o wifi_fp2 -j DROP cmd is: ebtables -A FORWARD -i eth3 -o wifi_fp3 -j DROP [PLOAM] EncrPortId GemPortId<280>, EncyMode<0> [PLOAM] EncrPortId GemPortId<280>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<280>, EncyMode<0> [PLOAM] EncrPortId GemPortId<280>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing [PLOAM] EncrPortId GemPortId<280>, EncyMode<0> [PLOAM] EncrPortId GemPortId<280>, EncyMode<0>,GemFlowId<256> [PLOAM] EncyMode no changed, do nothing DrvSetRateController() failed, ret = 230 GemCtp::m_trafficManagement = 2 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! PQMapperItf::set_mbsp_instance() Line No.=558 pq_mapper_instance_id=0xff02 PQMapperItf::set_mbsp_instance() Line No.=559 mbsp_instance_id=0x0f0f m_associated_uni_ptr=0 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! hal_stream_us_create_ethflow: olt_base=2 qos_bl_set_us_tc_method lan=9 us method change from 0 to 7 [hal_traffic_cla DrvConfigUsOutVidInVidSecKeyDefaultEthFlow is called! ssify_handle] call hal_bl_cfg_us_out_vid_innervid_to_eth_flow to HAL_ADD_E, phyPort = 4, wanIf = 8, outVid = 2675, untaggedFlowId = 3, unmatchedFlowId= 255 configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 0 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 eth_config_ds_vlan_action_base: action.mode=3 flowUtil_exchangePortNumber: the port is invalid <8>, use BL_BRIDGE_PORT_LAN_3SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 0 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 create unmatch rule :dsTggingMode= REMOVE_ONE_TAG eth_config_ds_vlan_action_base: action.mode=6 flowUtil_exchangePortNumber: the port is invalid <10>, use BL_BRIDGE_PORT_LAN_3ERR sal_qos_map_ds_ethflow_to_policer:Construct SFU downstream policer attribute failed udhcp client (v0.9.8) started [ time: 1449412076 ] Before register event pid 1904 [ time: 1449412076 ] >>>>entering raw listen mode [ time: 1449412076 ] Before start udhcpc pid 1904 [ time: 1449412076 ] *** signal_pipe[0]=19 signal_pipe[1]=20 dhcpc_msgid=16 [ time: 1449412076 ] convertToGMISetSipUserData termid from OMCILib: 201 convertToGMISetSipUserData set line: 1g_cvpQ: 163845 UDPManagerPortInit: portStart =5000, portNum=100 >>>sal_potsPortAdminStateChangeNotify, port(0-1)<0> admin state is unlocked libONU_GetGPONType :cfg_getOnuType succ <type=HGU> g_cvpQ: 163845 power down mode >>>sal_PortAdminStateChangeNotify, port<0> admin state is locked g_cvpQ: 163845 XXXXX: XXXXX@XXXXX.net.idg_cvpQ: 163845 g_cvpQ: 163845 Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e libONU_GetGPONType :cfg_getOnuType succ <type=HGU> power down mode >>>sal_PortAdminStateChangeNotify, port<1> admin state is locked convertToGMISetTCPUDPData set line: 255g_cvpQ: 163845 g_cvpQ: 163845 Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e libONU_GetGPONType :cfg_getOnuType succ <type=HGU> power down mode >>>sal_PortAdminStateChangeNotify, port<2> admin state is locked Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e g_cvpQ: 163845 power down mode restart auto mode >>>sal_PortAdminStateChangeNotify, port<3> admin state is unlocked g_cvpQ: 163845 g_cvpQ: 163845 Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e retval=1 state=0 listen_mode=2 [ time: 1449412078 ] ISSET(signal_pipe[0]=0 ISSET(fd)=1 ISSET(dhcpc_msgid)=0 [ time: 1449412078 ] Received DHCP OFFER in state 0 [ time: 1449412078 ] g_cvpQ: 163845 Mcast channel vid : 4096 ; Channel Param : 111 mcast vlan is set >>>>> PQMapper is set >>>>> Mcast Param Flag: 0x000f configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 0 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=260 is set to 0 convertToGMISetAppServicePfl termid from OMCILib: 201 convertToGMISetAppServicePfl set line: 1PQMapperItf::set_mbsp_instance() Line No.=558 pq_mapper_instance_id=0x1402 PQMapperItf::set_mbsp_instance()DrvSetRateController() failed, ret = 230 Line No.=559 mbsp_instance_id=0x0104 g_cvpQ: 163845 GemCtp::m_trafficManagement = 2 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! convertToGMISetAppServicePflToSubscriber termid from OMCILib: 201 convertToGMISetSipUserData set line: 1g_cvpQ: 163845 retval=1 state=1 listen_mode=2 [ time: 1449412079 ] ISSET(signal_pipe[0]=0 ISSET(fd)=1 ISSET(dhcpc_msgid)=0 [ time: 1449412079 ] Received DHCP ACK in state 1 [ time: 1449412079 ] igmpbl hal_kernel_cfg_mcast_vlan_action port=3 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! PQMapper is set >>>>> Mcast Param Flag: 0x000f GemCtp::m_trafficManagement = 2 convertToGMISetSipUserData termid from OMCILib: 201 convertToGMISetSipUserData set line: 1g_cvpQ: 163845 hal_stream_us_create_ethflow: olt_base=2 qos_bl_set_us_tc_method lan=4 us method change from 0 to 7 m_ibcastGemPort=65535, gemCtpInstance=2046, cfgStatusFlag=0. Setting incidental broadcast gem port,m_broadcastId=0x7fe. [hal_traffic_cla DrvConfigUsOutVidInVidSecKeyDefaultEthFlow is called! ssify_handle] call hal_bl_cfg_us_out_vid_innervid_to_eth_flow to HAL_ADD_E, phyPort = 3, wanIf = 8, outVid = 111, untaggedFlowId = 4, unmatchedFlowId= 255 configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 0 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=260 is set to 0 m_number_of_entries = 0x1, m_number_of_associatedUni_entries=0x1. eth_config_ds_vlan_action_base: action.mode=3 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 0 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=260 is set to 0 create unmatch rule :dsTggingMode= REMOVE_NO_TAG eth_config_ds_vlan_action_base: action.mode=0 flowUtil_updateParamByMode: mode=0. do nothing exchangeVlanActionMode: the tag mode not support<0>,use eVLAN_TAG_ACTION_TRANSPARENT ERR sal_qos_map_ds_ethflow_to_policer:Construct SFU downstream policer attribute failed g_cvpQ: 1DrvConfigUsVlanActionTpidReplaceOption() failed, ret = 338 63845 flowUtil_updateParamByMode: mode=2. do nothing hal_stream_us_create_ethflow: olt_base=2 g_cvpQ: 163845 hal_stream_us_cr DrvConfigUsOutVidInVidSecKeyDefaultEthFlow is called! eate_ethflow: olt_base=2 [hal_traffic_classify_handle] call hal_bl_cfg_us_out_vid_innervid_to_eth_flow to HAL_ADD_E, phyPort = 3, wanIf = 8, outVid = 0, untaggedFlowId = 6, unmatchedFlowId= 255 g_cvpQ: 163845 configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 0 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=260 is set to 0 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! g_cvpQ: 163845 Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e eth_config_ds_vlan_action_base: action.mode=3 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! --- begin to delete---- configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 1 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=260 is set to 1 create unmatch rule :dsTggingMode= REMOVE_ONE_TAG eth_config_ds_vlan_action_base: action.mode=6 ERR sal_qos_map_ds_ethflow_to_policer:Construct SFU downstream policer attribute failed get wlanobj success, status before : 0 get wlanobj success, status after: 0 convertToGMISetTCPUDPData set line: 255g_cvpQ: 163845 --- begin to delete---- isEnter: 0 0 0 0 g_cvpQ: 163845 eth_config_ds_vlan_action_base: action.mode=6 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 1 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=260 is set to 1 create unmatch rule :dsTggingMode= REMOVE_ONE_TAG eth_config_ds_vlan_action_base: action.mode=6 ERR sal_qos_map_ds_ethflow_to_policer:Construct SFU downstream policer attribute failed eth_config_ds_vlan_action_base: action.mode=6 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! IRQ 130/wlan0: IRQF_DISABLED is not guaranteed on shared IRQs [PHY_ConfigMACWithParaFile][MACPHY_REG_92C] ===> Load_92C_Firmware <=== Load_92C_Firmware Timeout waiting for PADO packets Unable to complete PPPoE Discovery Lease of 10.146.8.25 obtained, lease time 43200 [ time: 1449412081 ] DHCP ACK received from DHCP Server 10.0.0.60 [ time: 1449412081 ] >>>>entering none listen mode [ time: 1449412081 ] dhcpc-state:[2]. dhcpc-state:[2]. g_cvpQ: 163845 g_cvpQ: 163845 assigned 1 ip 10.146.8.25 mask 255.255.255.0 gateway 10.146.8.1 nameserver sipserver [ time: 1449412081 ] g_cvpQ: 163845 g_cvpQ: 163845 convertToGMISetAppServicePfl termid from OMCILib: 201 convertToGMISetAppServicePfl set line: 1g_cvpQ: 163845 emac ID: 3 phy changed: rate 2 convertToGMISetAppServicePflToSubscriber termid from OMCILib: 201 convertToGMISetSipUserData set line: 1g_cvpQ: 163845 convertToGMISetSipUserData termid from OMCILib: 201 convertToGMISetSipUserData set line: 1g_cvpQ: 163845 ip: RTNETLINK answers: No such process convertToGMISetMediaProfile set line: 255g_cvpQ: 163845 ip: RTNETLINK answers: No such file or directory ip: RTNETLINK answers: No such process convertToGMISetVoiceServicePfl2DVP set line: 255g_cvpQ: 163845 convertToGMISetVoiceServicePfl2CDP set line: 255g_cvpQ: 163845 disable SLID for 2.Xget queue id:/configs/alcatel/config/vpp_event getQidForEventMgr: message queue [360459] has been created convertToGMISetRtpPflData set line: 255g_cvpQ: 163845 dhcpResult valid field: 7 dhcpResult default next hop: a920801 dhcpResult voipClientIpAddr: a920819 dhcpResult subnetmask: ffffff00 dhcpResult ftpServerIpAddr: 0 dhcpResult primaryDnsServerIpAddr: 0 dhcpResult secondaryDnsServerIpAddr: 0 UDPManagerPortInit: portStart =5000, portNum=55000 Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e convertSIP2CVPPotsSetSubscriber set line: 1g_cvpQ: 163845 UDPManagerPortInit: portStart =5000, portNum=55000 g_cvpQ: 163845 convertSIP2CVPSetUserAgent: clientIpAddr: a920819g_cvpQ: 163845 Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e libONU_GetGPONType :cfg_getOnuType succ <type=HGU> libONU_EthPortType :cfg_getEthPortType succ: port<1>,isTr069Domain<1> power down mode restart auto mode >>>sal_PortAdminStateChangeNotify, port<0> admin state is unlocked libONU_EthPortType :cfg_getEthPortType succ: port<2>,isTr069Domain<1> power down mode restart auto mode >>>sal_PortAdminStateChangeNotify, port<1> admin state is unlocked libONU_EthPortType :cfg_getEthPortType succ: port<3>,isTr069Domain<1> power down mode restart auto mode >>>sal_PortAdminStateChangeNotify, port<2> admin state is unlocked libONU_EthPortType :cfg_getEthPortType succ: port<4>,isTr069Domain<0> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.5. libONU_EthPortType :cfg_getEthPortType failled,port<5> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.6. libONU_EthPortType :cfg_getEthPortType failled,port<6> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.7. libONU_EthPortType :cfg_getEthPortType failled,port<7> cfgXml_getObject Node Null, oid=259 uri=InternetGatewayDevice.X_ASB_COM_EthPort.EthPort.8. libONU_EthPortType :cfg_getEthPortType failled,port<8> lib_configpppoeauth:Setting username to PPPoE WAN lib_configpppoeauth:<username:XXXXXXXXXXXX@XXXXXX.net>, <authInfo :XXXXXXXXXXXX@XXXXXX.net> success hgu board, with POTS ======confLED : lineId[1],led status[4]====== DBG sal_qos_update_wan_info:add_rem=1 vid=881 pbit=0 wan_name=ppp111 ======confLED : lineId[1],led status[1]====== Simultaneous groups set >>>>> Mcast Param Flag: 0x0008 Igmp version is set >>>>> Mcast Param Flag: 0x000a Upstream rate is set >>>>> Mcast Param Flag: 0x000e libONU_GetGPONType :cfg_getOnuType succ <type=HGU> configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 1 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=3585 is set to 0 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> time.nist.gov: Host name lookup failure select time.nist.gov error ntp1.tummy.com: Host name lookup failure select ntp1.tummy.com error !!!!!select ntp server error PQMapperItf::set_mbsp_instance() Line No.=558 pq_mapper_instance_id=0xe102 PQMapperItf::set_mbsp_instance() Line No.=559 mbsp_instance_id=0x0e01 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> GemCtp::m_trafficManagement = 2 DrvSetRateController() failed, ret = 230 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! libONU_GetGPONType :cfg_getOnuType succ <type=HGU> libONU_GetGPONType :cfg_getOnuType succ <type=HGU> SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! libONU_GetGPONType :cfg_getOnuType succ <type=HGU> libONU_GetGPONType :cfg_getOnuType succ <type=HGU> libONU_GetGPONType :cfg_getOnuType succ <type=HGU> m_number_of_entries = 0x1, m_number_of_associatedUni_entries=0x1. SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 1 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=3585 is set to 0 libVlanInfo_CfgVlanOperation: add new instance, ID is <1> DBG sal_qos_update_wan_info:add_rem=1 vid=881 pbit=0 wan_name=ppp111 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 1 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 0 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=3585 is set to 0 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> --- begin to delete---- configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 1 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 1 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=3585 is set to 1 libONU_GetGPONType :cfg_getOnuType succ <type=HGU> --- begin to delete---- libONU_GetGPONType :cfg_getOnuType succ <type=HGU> configureUnmatchFlow: PRINTING uniDsTaggingMode_map CONTENTS: uni: 257 dstag_mode: 0 uni: 258 dstag_mode: 0 uni: 259 dstag_mode: 0 uni: 260 dstag_mode: 1 uni: 261 dstag_mode: 0 uni: 262 dstag_mode: 0 uni: 263 dstag_mode: 0 uni: 264 dstag_mode: 0 uni: 3585 dstag_mode: 1 configureUnmatchFlow: uniDsTaggingMode_map: 2. dsTaggingMode for portID=3585 is set to 1 ================ AP SCORE ================ 0 0 0 0 0 0 0 0 0 0 0 ========================================== ================ FA COUNT ================ 159 141 97 61 84 360 1149 123 843 175 50 ================ mac_rx_count ================ 0 0 0 0 0 0 0 0 0 4 12 ========================================== For each channel, Caculate score with MAC rx counter and FA counter ================ AP SCORE after first round================ 159 141 97 61 84 360 1169 219 987 323 206 ========================================== ================ Mac_rx_count_40M ================ 0 0 0 0 0 0 2 2 7 0 0 ========================================== Caculate score with MAC 40M_rx counter ================ AP SCORE after second round================ 159 151 121 124 165 445 1270 320 1093 418 297 ========================================== The Minimum Score=121,so choose the Channel 3 hal_igmp_set_ds_mcast_vlan mc_vlan=111 hal_igmp_set_ds_mcast_vlan mc_vlan=110 emac ID: 1 phy changed: rate 2 PPP session is 2969 Connected to 00:02:3b:10:1c:09 via interface wan0.881 Using interface ppp111 Connect: ppp111 <--> wan0.881 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! CHAP authentication succeeded: CHAP authentication success, unit 12865 CHAP authentication succeeded peer from calling number 00:02:3B:10:1C:09 authorized local IP address 36.81.17.9 remote IP address 36.81.16.1 primary DNS address 118.98.44.166 secondary DNS address 118.98.44.100 default gateway address 36.81.16.1 subnet-mask address 255.255.255.255 PPP: /etc/ppp/ip-up Connection Up. pppd sendPppEventMessage: state=4, lastConnetionError=ERROR_NONE send out CMS_MSG_PPP_STATE_CHANGED Function cfg_notifyPONPortStatusChange() is called Function cfg_notifyPONPortStatusChange(335) is called g_cvp_data_initialized is false iptables: No chain/target/match by that name. conntrack v1.0.0 (conntrack-tools): 0 flow entries have been deleted. socket: Protocol not supported nl_init failed!!! nf_conntrack_rtsp v0.6.21_bl_backported loading nf_conntrack_rtsp: ports[0]=554 nf_conntrack_rtsp init: registering helper for pf: 2 port: 554nf_nat_rtsp v0.6.21_bl_backported loading nf_nat_rtsp cofiguration: stunaddr=0x0 destaction=[(null)] help(c2850118) expected(c285001c) &expected(c285001c) iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). /dev/napt_dev: No such file or directoryBad file descriptorrutwl2_setPonVifAccAttr:L118 [[1;35mERROR[0m]:set iwan ip failed. /dev/napt_dev: No such file or directoryBad file descriptorrutwl2_setPonVifAccAttr:L126 [[1;35mERROR[0m]:set interface acc attr failed. the PPP-defaultGateway:[36.81.16.1]. ip: RTNETLINK answers: No such process killall: tr: no process killed cvp_proxy_obj_fwd: cvp not initialized! [37;40m[Dec 6 21:28:08] [1;33mWARNING [37mread_config_file()@../source/trconfig.c:492 => [0;37;40mUnknown config argument: UDPAddress [0m[37;40m[Dec 6 21:28:08] [1;33mWARNING [37mread_config_file()@../source/trconfig.c:492 => [0;37;40mUnknown config argument: UDPPort [0m[37;40m[Dec 6 21:28:08] [1;33mWARNING [37mread_config_file()@../source/trconfig.c:492 => [0;37;40mUnknown config argument: UDPNotifyInterval [0m Activate static route with interface name = InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.! PortMapping start iptables v1.4.8: option `--to-destination' requires an argument Try `iptables -h' or 'iptables --help' for more information. Bad argument `ACCEPT' Try `iptables -h' or 'iptables --help' for more information. DBG sal_qos_tmp_get_next_clsobj_id: conntrack v1.0.0 (conntrack-tools): connection tracking table has been emptied. DBG sal_qos_update_wan_info:add_rem=1 vid=881 pbit=0 wan_name=ppp111 Entering add_XCT_BIND_Event()..... download ftp profile. omci trace formal xml download XML AL2_PT_telemex.xml has been downloaded. TR069 enablCTMiddleware = 1 connect OK #####receive the server time is 2015-12-06 14:28:14 SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! SAL_GetCfmoamQid() failed; Error=2,No such file or directory CfmOam:: SAL_SendMsgCfmOam(); returned Failure:can not get qid! emac ID: 3 phy changed: rate 2 BROADLIGHT Lilac Linux (FS version 2.0.85.2, issue 2011-07-17-232953-juno) Kernel 2.6.34.8-BCM2.1.11.0 #1 Tue Jul 15 20:09:55 CST 2014 192.168.0.0 login:
External Links
GPIO Kernel Module
gpio_mgr.ko http://www.mediafire.com/download/z7qikvustip9cvm/gpio_mgr.ko
gpio-led.ko http://www.mediafire.com/download/kf8dbte0d69be84/gpio-led.ko