Search

You can find the results of your search below.

节省固件空间 @zh:docs:guide-user:additional-software
11 Hits, Last modified:
e-problem/898]] * [[https://forum.openwrt.org/t/tp-link-tl-mr-3420-v3-build/855/8]] * [[https://forum.open... nd line shown below, you need to adjust ''PROFILE=tl-wr941nd-v6'' to your device. Use ''make info'' to... r making these adjustments | ''make image PROFILE=tl-wr941nd-v6 \ PACKAGES="uhttpd uhttpd-mod-ubus lib... r making these adjustments | ''make image PROFILE=tl-wr941nd-v6 \ PACKAGES="uhttpd uhttpd-mod-ubus lib
Flash Layout/Flash 布局 @zh:docs:techref
10 Hits, Last modified:
我们之后能直接通过 分区名来定位某个分区,而不用指定数据的精确起始点. :!: 下图中的表格是 TP-Link [[toh:tp-link:TL-WR1043ND]]型号的分区图, 注意这只是一个**例子**! 另一个, 与这个有些微不同的, 例子能在wiki... 是不同的! 请参考wiki页面上针对特定设备的页面, 来获取该设备的Flash布局信息. ^ TP-Link WR1043ND Flash Layout ^^^^^^ ^ Layer0 |
使用Atheros和MAC80211 WDS实现无线网桥(无线中继) @zh:docs:guide-user:network:wifi
8 Hits, Last modified:
了其实现原理。 ===== 配置 ===== * 在安装了OpenWrt 12.09的TP-LINK TL-WR1043ND作为本地无线接入点,Rosewill RNX-N300RT作为远程无线桥接客户端设备的情况下验证通过。 * 在两部安装了OpenWrt 15.05的TP-LINK TL-WR1043ND上验证通过。 * 在安装了OpenWrt 15.05的Netgear WNDR3700v4作为
使用LuCI和CLI允许OpenWrt固件 @zh:docs:guide-user:installation
7 Hits, Last modified:
downloading the OpenWrt 15.05 upgrade image for a TP-LINK TL-WR1043ND ver. 1.x router cd /tmp wget http://downloads.op... 15.05/ar71xx/generic/openwrt-15.05-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin # check the integrit
通用 NOR 备份 @zh:docs:guide-user:installation
6 Hits, Last modified:
用,因为art分区通常不可写,因此您必须在做一些[[https://openwrt.org/toh/tp-link/tl-wr1043nd#making_bootloader_partition_writable|小修改]]后编译自己的
GPIO @zh:docs:techref:hardware
4 Hits, Last modified:
ocs:guide-user:hardware:mmc_over_gpio]] * [[toh/tp-link/tl-wr1043nd#GPIOs|GPIOs of AR913x SoC]] * [[/oldwiki/port.
  • Last modified: 2024/04/10 13:49
  • by ynezz