Search

Fulltext results:

OpenSSL benchmarks @docs:guide-user:perf_and_log

298 Hits, Last modified: 6 days ago

| TP-Link Archer C2600 ... | TP-Link Archer C2600 ... | [[toh:tp-link:archer_c6u_v1_eu|TP-Link Archer C6U v1]] | MIPS 1004Kc V2.... | TP-Link TL-WR1043ND v2

ISP Configurations @docs:guide-user:network:wan

42 Hits, Last modified: 22 hours ago

g is an example configuration working on an [[toh:tp-link:archer_c7|TP-Link Archer C7]]: <code> config interface 'wan' option ... ir. === ADSL2(+) === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremeno 1" plan via ADSL2+... /code> === VDSL2 === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremeno 2" plan over VDSL2... eds to add the VLAN tag in this case. Example for Archer C7 V2 below. Old platform: <code> config interface 'w

B.A.T.M.A.N. / batman-adv @docs:guide-user:network:wifi:mesh

35 Hits, Last modified: 2 years ago

nwrt-18.06'' and ''master'' in September, 2018 on Archer C7v2 units running the non-CT firmware (see note above... ed here, an ad-hoc (IBSS) mesh, or point-to-point links can also be utilized. Note that use of Ethernet links with their typical MTU of 1500 will reduce the P... lower latency, and/or reliability of an Ethernet link will make up for this effect. ===== Installation

Switch documentation @docs:guide-user:network:vlan

9 Hits, Last modified: 7 months ago

so look at the Wiki for your specific device. The TP-Link Archer C7 has eth0 = WAN, and eth1 = LAN (the 4 switch port... ur router. Every router is different. The popular TP-Link WDR4300 only has eth0. ===== UCI config, swconfi... 'swconfig dev <switch_interface_name> show | grep link'' or see [[docs:techref:swconfig]] ==== Assumpti... == Examples ==== ==== Example on the asus wl500gp v2 , openwrt 10.03, every physical port ==== <code b