Search

You can find the results of your search below.

OpenSSL Benchmarks @docs:guide-user:perf_and_log
200 Hits, Last modified:
| r11063 | Qualcomm Atheros QCA9558 ver 1 rev 0 | TP-Link TL-WR1043ND v2 | MIPS 74Kc V5.0 | 358.80 | 1.1.1g | 64406420 | 4... | r11319 | Qualcomm Atheros QCA956X ver 1 rev 0 | TP-Link Archer C6 v2 | MIPS 74Kc V5.0 | 385.84 | 1.1.1d | 69201420 | 4... .2 | 21.8 | | r11063 | Qualcomm Atheros IPQ8064 | TP-LINK Archer C2600 | ARMv7 Processor rev 0 (v7l) | 67.44 | 1.1... .4 | 481.3 | | r9106 | Qualcomm Atheros IPQ8064 | TP-LINK Archer C2600 | ARMv7 Processor rev 0 (v7l) | 39.06 | 1.1
ISP Configurations @docs:guide-user:network:wan
16 Hits, Last modified:
eds to add the VLAN tag in this case. Example for Archer C7 V2 below. Old platform: <code> config interface 'w... PoE| |IPv4 nameserver|PPPoE| |IPv6 address|PPPoE (link-local with dynamic sub-prefix)| |IPv6 gateway|n/a... twork protocols are layered in this way: - VDSL link (17a profile, G.993.5 depending on the DSLAM) -... ] && [ wan6_4 = "$INTERFACE" ] ; then ip link set ds-wan6_4 mtu 1452 fi </code> ===== Ireland
Switch Documentation @docs:guide-user:network:vlan
8 Hits, Last modified:
so look at the Wiki for your specific device. The TP-Link Archer C7 has eth0 = WAN, and eth1 = LAN (the 4 switch port... ur router. Every router is different. The popular TP-Link WDR4300 only has eth0. ===== UCI config, swconfi... 'swconfig dev <switch_interface_name> show | grep link'' or see [[docs:techref:swconfig]] ==== Assumpti... == Examples ==== ==== Example on the asus wl500gp v2 , openwrt 10.03, every physical port ==== <code b
  • Last modified: 2020/12/09 22:33
  • by hauke