Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Upgrading OpenWrt firmware using LuCI and CLI
- ash Layout]] * [[docs:guide-user:installation:sysupgrade.cli|Upgrading OpenWrt firmware using CLI]] * [[docs:guide-quick-start:sysupgrade.luci|Upgrading OpenWrt firmware using LuCI]] * [[docs:guide-quick-start:admingui_sysupgrade_keepsettings#upgrade_compatibility|Keep Settings ... patibility]] * [[docs:guide-user:installation:sysupgrade.packages|Saving/restoring user-installed packages
- Upgrading OpenWrt firmware using CLI
- content of [[docs:guide-user:installation:generic.sysupgrade|generic OpenWrt OS upgrade procedure]]. * Non-e... are strongly advised to [[docs:guide-quick-start:sysupgrade.luci|Upgrading OpenWrt firmware using LuCI]] inst... nd use only OpenWrt firmware images ending in **"-sysupgrade.bin"** for command line upgrades.\\ For x86 systems there is no "sysupgrade" image, just be sure the new firmware image has t
- Upgrade using Attended Sysupgrade
- ====== Upgrade using Attended Sysupgrade ====== The Attended SysUpgrade (ASU) facility allows an OpenWrt device to update to new firmware while prese... waits until it's complete, it's called “attended” sysupgrade. You can see Attended Sysupgrade in action in a video from OneMarcFifty at: https://www.youtube.com/watch?v=F
- Upgrade from (old) ar71xx to ath79
- restore]] documentation. ===== Step 3: download sysupgrade image ===== Download the ath79 sysupgrade image of 19.07 for your device, and copy it to ''/tmp/'' on your r... r device! ===== Step 4: upgrade your system with sysupgrade ===== Flash the sysupgrade image **without keeping settings**. You can either use the [[:docs:guide-quick-s
- Sysupgrade @docs:guide-user:installation:installation_methods
- ====== Sysupgrade ====== Devices with this installation method run already OpenWrt. Installation is done via sysupgrade. * -> [[docs:guide-user:installation:generic.sysupgrade|Upgrading OpenWrt firmware via LuCI and CLI]] * -> [[docs:guide-user:installation:sysupgrade.cli|Upgrading OpenWrt firmware via CLI]] * -> [
- Flashing OpenWrt with Wi-Fi enabled on first boot
- t with Wi-Fi enabled on first boot ===== We use ''sysupgrade'' cli tool with a specially prepared restore conf... etc/uci-defaults/'' to create a config file for ''sysupgrade'' - run ''rm /etc/uci-defaults/xxx_config'' to ... current image in case it is a dual boot device or sysupgrade fails - run ''sysupgrade -n -f config.tar.gz image.bin'' to flash. Note that it will not save the current c
- Preserving OpenWrt packages
- See also: [[docs:guide-user:installation:attended.sysupgrade|Attended Sysupgrade]], [[docs:guide-user:advanced:opkg_extras|Opkg extras]], [[docs:guide-user:advanced:hotpl... ions to this problem. ===== Solutions ===== ==== Sysupgrade ==== Include user-installed packages in your backup with [[docs:techref:sysupgrade]]. <code bash> sysupgrade -k -b - \ | tar -O -z
- OpenWrt on x86 hardware (PC / VM / server)
- stallation and consists of simply executing the ''sysupgrade'' command. Unfortunately, when upgrading x86 mach... any additional partitions you require. - Use ''sysupgrade'': this is default upgrading procedure but the le... docs:guide-user:installation:installation_methods:sysupgrade|Sysupgrade]] for details. - Extract the boot partition image from ''ext4-combined.img.gz'' and write it and
- SD card @docs:guide-user:installation:installation_methods
- device which will be named similar to ''openwrt-*-sysupgrade.img.gz''. - Select the image. - Select your S... device which will be named similar to ''openwrt-*-sysupgrade.img.gz''. - Decompress it: <code>gzip -d openwrt-*-sysupgrade.img.gz</code> - Connect SD card to your compute... image to the SD card with: <code>dd if=openwrt-*-sysupgrade.img of=/dev/sdX</code> ==== Which image to chose
- FAQ before installing OpenWrt
- tloader flasher or stock software flasher * a **sysupgrade image** (previously named trx image) is designed ... nvert the device to OpenWrt. After that, use the sysupgrade images. * a **uImage** is a [[http://docs.blac
- Installing OpenWrt
- In case of [[docs:guide-user:installation:generic.sysupgrade|upgrading]] existing OpenWrt system, the proper l
- Installing OpenWrt via TFTP
- tp> get openwrt-ar71xx-generic-hornet-ub-squashfs-sysupgrade.bin Received 7270950 bytes in 2.7 seconds tftp> <
- Installation methods @docs:guide-user:installation:installation_methods
- ilter=!title:serial;filter=title:(TFTP|web|GUI|SD|Sysupgrade|ap51);cols=2;hidejump;hidestart;display={title};s
- Recovery methods @docs:guide-user:installation:recovery_methods
- ilter=!title:serial;filter=title:(TFTP|web|GUI|SD|Sysupgrade);cols=2;hidejump;hidestart;display={title};sort=t