Search

You can find the results of your search below.

OpenWrt Debricking Guide
65 Hits, Last modified:
commands for your router could be different! === Raspberry Pi === If you don't have a USB serial ttl but have a Raspberry Pi, you can use it to connect to the router's serial pins. The Raspberry Pi's uart works at 3.3V which is the correct voltage... past we used to suggest that people shorted a few pins of the flash; when CFE booted and attempted to perform the CRC32 there would be a flash read error which would cha... -- * [[https://forum.openwrt.org/viewtopic.php?pid=128790#p128790]] ===== by Vavasik ===== In this case, some
Rescue from failed firmware upgrade
18 Hits, Last modified:
ces (e.g. SD-cards) ===== Examples: the different Raspberry PI's, devices of PC Engines). OpenWrt devices that ... i.bin'' on an USB flash drive (must be FAT or FAT32) - Plug USB flash drive into device USB port ... after a few seconds. - The device will take ~15-20 seconds to boot a mini-web server, that provides... der either (if in doubt, try both) - http://192.168.0.1 (TP-Link and newer D-Link devices) -
  • Last modified: 2024/01/03 12:05
  • by aparcar