Search

You can find the results of your search below.

Fulltext results:

Serial Cables @docs:techref:hardware
41 Hits, Last modified:
oryID=167&title=TTL-232R-RPi |FTDI's TTL-232R-RPi Raspberry Pi / 3.3v boards (£)]] You may need to rewire the t... X and RX - it shouldn't break if reversed. ==== Raspberry Pico as USB to serial cable ==== Using this board a... program micro processors) can be downloaded from raspberry's web page //(from the Software Utilities section of the Raspberry Pi Pico documentation page. Click on the Raspberry Pi Pico section, scroll down to Software Utilities, and download the
JTAG @docs:techref:hardware
39 Hits, Last modified:
ve a PC with parallel port but instead own a [[wp>Raspberry_Pi|Raspberry Pi]], you can use a [[https://github.com/oxplot/tjtag-pi|Raspberry Pi version]] of this software instead which uses [[http://elinux.org/RPi_Low-level_peripherals#Genera... urpose_Input.2FOutput_.28GPIO.29|the onboard GPIO pins]] to drive the JTAG lines. Downloads:\\ * {{... variants:** * [[https://github.com/oxplot/tjtag-pi|tjtag-pi]] * [[https://github.com/zoobab/tjtag-
OpenWrt Debricking Guide @docs:guide-user:troubleshooting
31 Hits, Last modified:
commands for your router could be different! === Raspberry Pi === If you don't have a USB serial ttl but have a Raspberry Pi, you can use it to connect to the router's serial pins. The Raspberry Pi's uart works at 3.3V which is the correct voltage... that is, in the end you will only be connecting 3 pins out of 4). === WIFI === If by chance the lan b... Of course the switch still works, it's a separate piece of hardware and the LEDs are wired directly to
OpenSSL benchmarks @docs:guide-user:perf_and_log
22 Hits, Last modified:
| Raspberry PI 2 Model B ... | Raspberry PI 2 Model B ... | [[toh:raspberry_pi_foundation:raspberry_pi| Raspberry Pi Model B]] | ARM1176JZF-S ... | Raspberry Pi 3 B+
PirateBox & LibraryBox @docs:guide-user:hardware
20 Hits, Last modified:
k, an upload possibility and a shoutbox. {{media:raspberry_pi_foundation:raspberry.pi.jpg?0x200|Some casing with a funny logo}} {{media:tplink:piratebox.png?0x200|}} {{media:tplink:librarybox.jpeg?500|}} ===Requirements=== For installing PirateBox you need a device with at least one USB po... /github.com/MaStr/mkPirateBox/wiki/Router-support|PirateBox gitHub Repository]]. ===HowTo PirateBox==
USB Guest configuration @docs:guide-user:hardware
18 Hits, Last modified:
os AR9331**, and both had a very similar board. -raspberry pi 4 (or similar) via dtoverlay=dwc2 in config.txt a... ce) * module parameters can specify the VID, PID, device version, manufacturer string, product st... will create a 'usbX' device (X= number) with VID:PID 0525:a4a2, which to most userspace programs will... ost device (ie PC) a USB Mass Storage device (VID:PID 0525:a4a5 by default) will appear and behave as
OpenWrt SystemReady @docs:guide-user
8 Hits, Last modified:
| :?: | Missing HW testing | | Raspberry Pi | Raspberry Pi 4 Model B
LIRC GPIO blaster @docs:guide-user:hardware
7 Hits, Last modified:
ster module is based on the one avaliable for the raspberry pi, without the receiver part, and properly packaged... ....................... Tool for controlling gpio pin│ │ │ │ < > hwclock............................... GPIO 17 you need to parse the option\\ ''gpio_out_pin=17'' Also you may need to invert the signal dep... ve options:\\ ''insmod lirc_gpioblaster gpio_out_pin=17 invert=1'' You don't need to use this comman
Irqbalance @docs:guide-user:services
7 Hits, Last modified:
letion interrupts Err: 0 </code> [[toh:raspberry_pi_foundation:raspberry_pi|Raspberry Pi 4]]: <code> CPU0 CPU1 CPU2
AdGuard Home @docs:guide-user:services:dns
6 Hits, Last modified:
builds. An alternative option could be to use a Raspberry Pi Zero plugged into your routers USB port to run AGH. [[https://forum.openwrt.org/t/raspberry-pi-zero-as-a-router-attached-ethernet-gadget/112329|Using a Pi Zero for AGH]]. ==== DNS latency/performance ===... == Reverse DNS (rDNS) ==== To enable rDNS so AGH picks up your DHCP assignments from OpenWrt. - Fr
OpenWrt Hardware List @docs:techref:hardware
4 Hits, Last modified:
| | | [[toh:raspberry_pi_foundation:start|Raspberry Pi]] | | | | Hardk
CoovaChilli captive portal @docs:guide-user:services:captive-portal
4 Hits, Last modified:
formatique.ch/how-to-build-a-captive-portal-with-radiusdesk-and-coova-chilli-on-raspberry-pi-running-openwrt/]]
CrowdSec @docs:guide-user:services
3 Hits, Last modified:
on on a dedicated device in your network (maybe a Raspberry Pi) and only install the firewall bouncer on the Ope... Manage decisions explain Explain log pipeline help Help about any command hu
Rescue from failed firmware upgrade @docs:guide-user:troubleshooting
3 Hits, Last modified:
ces (e.g. SD-cards) ===== Examples: the different Raspberry PI's, devices of PC Engines). OpenWrt devices that
SoC (System on a Chip) @docs:techref:hardware
3 Hits, Last modified:
dware:soc:soc.broadcom.bcm33xx]] === brcm2708 (= Raspberry Pi) === * OpenWrt support is WIP * no, there are
bcm27xx @docs:techref:targets
3 Hits, Last modified:
brcm2708 @docs:techref:targets
3 Hits, Last modified:
How to capture, filter and inspect packets using tcpdump or wireshark tools @docs:guide-user:firewall:misc
2 Hits, Last modified:
SD card @docs:guide-user:installation:installation_methods
2 Hits, Last modified:
DDNS Client DuckDNS @docs:guide-user:services:ddns
2 Hits, Last modified:
  • Last modified: 2024/04/10 13:49
  • by ynezz