Search

You can find the results of your search below.

MikroTik RB750Gr3 (non-native support, obsoleted with OpenWrt-19.07) @toh:mikrotik
344 Hits, Last modified:
flasher|arduino]] or a [[https://www.flashrom.org/RaspberryPi|Raspberry Pi]]. == Constructing the image == It's possible ... ng the stock image again. There is an unoccupied pin header on the PCB of the 750Gr3 which can be use... ithout having to de-solder it from the board. The pinout of this header is: ^ Header Pin ^ Purpose ^ | 1 | CLK | | 2,10 | GND | | 3 | DO | | 4 | VCC | |
Raspberry Pi @toh:raspberry_pi_foundation
149 Hits, Last modified:
====== Raspberry Pi ====== The Raspberry Pi is a [[wp>single-board computer]] without an [[docs:techref:hardware:switch|Ethernet Network Switch]]. Raspberry Pi 1 and Zero support only soft-float (armel) which is slower than hard-float. Raspberry Pi 2 and 3 are compiled with the ARM hard-float kern
OpenWrt v21.02.0 Changelog @releases:21.02
134 Hits, Last modified:
cm2708-gpu-fw:</nowiki>** <nowiki>add support for Raspberry Pi 4</nowiki> //<color #ccc>(</color><color #282>+70... 82]]'' **<nowiki>brcm2708:</nowiki>** <nowiki>Add Raspberry Pi 4 support</nowiki> //<color #ccc>(</color><color ... wiki>brcm2708:</nowiki>** <nowiki>add support for Raspberry Pi 2B 1.2</nowiki> //<color #ccc>(</color><color #28... sysupgrade fails no matter what image is given on Raspberry Pi 4</nowiki>\\ **Link:** [[https://bugs.openwrt.org
OpenWrt v21.02.0-rc1 Changelog @releases:21.02
130 Hits, Last modified:
cm2708-gpu-fw:</nowiki>** <nowiki>add support for Raspberry Pi 4</nowiki> //<color #ccc>(</color><color #282>+70... 82]]'' **<nowiki>brcm2708:</nowiki>** <nowiki>Add Raspberry Pi 4 support</nowiki> //<color #ccc>(</color><color ... wiki>brcm2708:</nowiki>** <nowiki>add support for Raspberry Pi 2B 1.2</nowiki> //<color #ccc>(</color><color #28... sysupgrade fails no matter what image is given on Raspberry Pi 4</nowiki>\\ **Link:** [[https://bugs.openwrt.org
OpenWrt v18.01.0-rc2 Changelog (WIP) @releases:18.06
128 Hits, Last modified:
2708:</nowiki>** <nowiki>bcm2709: add support for Raspberry Pi 3</nowiki> //<color #ccc>(</color><color #282>+8<... nowiki>** <nowiki>bcm2710: add 64 bit support for Raspberry Pi 3</nowiki> //<color #ccc>(</color><color #282>+11... m2708:</nowiki>** <nowiki>add support for the new Raspberry Pi Zero W</nowiki> //<color #ccc>(</color><color #28... ]'' **<nowiki>brcm2708:</nowiki>** <nowiki>detect Raspberry Pi Zero W</nowiki> //<color #ccc>(</color><color #28
OpenWrt v18.06.0 Changelog @releases:18.06
128 Hits, Last modified:
2708:</nowiki>** <nowiki>bcm2709: add support for Raspberry Pi 3</nowiki> //<color #ccc>(</color><color #282>+8<... nowiki>** <nowiki>bcm2710: add 64 bit support for Raspberry Pi 3</nowiki> //<color #ccc>(</color><color #282>+11... m2708:</nowiki>** <nowiki>add support for the new Raspberry Pi Zero W</nowiki> //<color #ccc>(</color><color #28... ]'' **<nowiki>brcm2708:</nowiki>** <nowiki>detect Raspberry Pi Zero W</nowiki> //<color #ccc>(</color><color #28
OpenWrt v18.01.0-rc1 Changelog (WIP) @releases:18.06
101 Hits, Last modified:
2708:</nowiki>** <nowiki>bcm2709: add support for Raspberry Pi 3</nowiki> //<color #ccc>(</color><color #282>+8<... nowiki>** <nowiki>bcm2710: add 64 bit support for Raspberry Pi 3</nowiki> //<color #ccc>(</color><color #282>+11... m2708:</nowiki>** <nowiki>add support for the new Raspberry Pi Zero W</nowiki> //<color #ccc>(</color><color #28... ]'' **<nowiki>brcm2708:</nowiki>** <nowiki>detect Raspberry Pi Zero W</nowiki> //<color #ccc>(</color><color #28
OpenWrt v19.07.0 Changelog @releases:19.07
100 Hits, Last modified:
* <nowiki>Add wifi driver, firmware and NVRAM for Raspberry Pi 3 b</nowiki> //<color #ccc>(</color><color #282>+... Wireguard-Tools not built for aarch64_cortex-a53 (raspberry pi 3)</nowiki>\\ **Link:** [[https://bugs.openwrt.or... scription:** <nowiki>gdb 8.2 fails to compile for Raspberry Pi 3B+</nowiki>\\ **Link:** [[https://bugs.openwrt.o... = **Description:** <nowiki>WNDR3400 v2 needs gpio pin 21 high to enable USB</nowiki>\\ **Link:** [[htt
OpenWrt v19.07.0-rc1 Changelog @releases:19.07
95 Hits, Last modified:
* <nowiki>Add wifi driver, firmware and NVRAM for Raspberry Pi 3 b</nowiki> //<color #ccc>(</color><color #282>+... Wireguard-Tools not built for aarch64_cortex-a53 (raspberry pi 3)</nowiki>\\ **Link:** [[https://bugs.openwrt.or... scription:** <nowiki>gdb 8.2 fails to compile for Raspberry Pi 3B+</nowiki>\\ **Link:** [[https://bugs.openwrt.o... = **Description:** <nowiki>WNDR3400 v2 needs gpio pin 21 high to enable USB</nowiki>\\ **Link:** [[htt
Pine64 PINE A64+ @toh:pine64
65 Hits, Last modified:
ional Bluetooth 4.0/802.11 b/g/n expansion board, Raspberry Pi compatible 40-pin GPIO header, 34 pin Euler Bus and 10 pin Expansion Bus. PINE A64 has 512Mb Ram and 10/100 ethernet while PINE A64+ provides 1024/2048Mb Ram and gigabit ethernet... contains a Target profile for the board. {{media:pine64:pine64_a64plus_top.jpg|Pine64 PINE A64+}} ==
Creator Ci40 (Marduk) 02KZ/5+ @toh:creator
63 Hits, Last modified:
faces for external Click boards | ^ Raspberry Pi Interface | Raspberry Pi B+ interface (not simultaneous with Click boards)... == OEM bootlog ==== If using the Downloaded uboot-pistachio-pistachio_marduk-v1.0.4.img from [[http://downloads.creatordev.io/?q=pistachio/marduk/|Downloads server]]: <WRAP bootlog
Devicepage with forum link + search 2 @playground
60 Hits, Last modified:
re the connections between the flash chip and the Raspberry Pi. The chip does not need to be de-soldered from the board. I used a pomona 8 pin SOIC connector connected to the raspberry pi with the following connections. Only the raspberry pi needs to be powered. The router was not connected to power. | Flash Pin | Meaning | Rapberr... | Enable SPI communication on the raspberry pi. <code> $ sudo raspi-config 9 - Advanced Options
Meraki MR18 installation using JTAG and OpenOCD @toh:meraki:mr18
58 Hits, Last modified:
use of the JTAG, which we're going to do using a Raspberry Pi and open source software. An overview of the proc... he JTAG * Connect both of these interfaces to a Raspberry Pi * Upload an installation kernel into the device... process {{:media:meraki:mr18-reprogramming-using-raspberry-pi.jpg?200|}} ==== Disassembly ==== Remove the rub... meraki:mr18-uart.jpg?200|}} Connect these to the Raspberry Pi's own UART using jumper wire: ^ Raspberry Pi ^ M
OpenWrt v22.03.0 Changelog @releases:22.03
50 Hits, Last modified:
</nowiki>** <nowiki>fix firmware is not exist for raspberry pi compute 4</nowiki> //<color #ccc>(</color><color ... escription:** <nowiki>RTC modules not enabled for Raspberry Pi</nowiki>\\ **Link:** [[https://github.com/openwrt
TP-Link TD-W8970 v1 @toh:tp-link
48 Hits, Last modified:
Quoting [[https://forum.openwrt.org/viewtopic.php?pid=279395#p279395|**joseba_g**]]: >(...) >As progra... ate, however its easy to use other things, like a raspberry, or even computer motherboard. only need point f... spispeed parameter works for me. I only connect 6 pins (the soic have 8) take a look to this [[https:... is easy and fast. ==== Corrupted Uboot ==== Use RaspberryPI SPI programming header with POMONA clip-in prog
LEDE v17.01.0 Changelog @releases:17.01
41 Hits, Last modified:
Serial Cables @docs:techref:hardware
41 Hits, Last modified:
JTAG @docs:techref:hardware
39 Hits, Last modified:
OpenWrt v22.03.0-rc1 Changelog @releases:22.03
38 Hits, Last modified:
TP-Link TL-WR741ND @toh:tp-link
38 Hits, Last modified:
TP-Link TL-WPA8630P v2 @toh:tp-link
36 Hits, Last modified:
Thomson TG784 @toh:thomson
32 Hits, Last modified:
Arcadyan AR7516 (aka EE Brightbox 1) @toh:arcadyan
32 Hits, Last modified:
BT Home Hub 2.0 Type A @toh:bt
31 Hits, Last modified:
LEDE v17.01.0-rc1 Changelog @releases:17.01
31 Hits, Last modified:
Pine64 RockPro64 v2.1 @toh:pine64
25 Hits, Last modified:
PirateBox & LibraryBox @docs:guide-user:hardware
20 Hits, Last modified:
USB Guest configuration @docs:guide-user:hardware
18 Hits, Last modified:
OpenSSL benchmarks @docs:guide-user:perf_and_log
18 Hits, Last modified:
Aruba AP-105 @toh:aruba
12 Hits, Last modified:
stintel @developers
12 Hits, Last modified:
Meraki MR18 @toh:meraki
12 Hits, Last modified:
TP-Link Archer MR200 v1 @toh:tp-link
11 Hits, Last modified:
Arcadyan VRV9510KWAC23 (AKA Livebox Next) @toh:arcadyan
9 Hits, Last modified:
LEDE v17.01.5 Changelog @releases:17.01
7 Hits, Last modified:
Irqbalance @docs:guide-user:services
7 Hits, Last modified:
LIRC GPIO blaster @docs:guide-user:hardware
7 Hits, Last modified:
AdGuard Home @docs:guide-user:services:dns
6 Hits, Last modified:
Raspberry Pi Foundation @toh:raspberry_pi_foundation
6 Hits, Last modified:
OpenWrt Hardware List @docs:techref:hardware
4 Hits, Last modified:
SoC (System on a Chip) @docs:techref:hardware
4 Hits, Last modified:
Running LXC on OpenWrt Host
4 Hits, Last modified:
Raspberry Pi @toh:hwdata:raspberry_pi_foundation
4 Hits, Last modified:
bcm27xx @docs:techref:targets
3 Hits, Last modified:
OpenWrt v21.02.0-rc2 Changelog @releases:21.02
3 Hits, Last modified:
LEDE v17.01.0 Final Changelog @releases:17.01
3 Hits, Last modified:
LEDE v17.01.1 Changelog @releases:17.01
3 Hits, Last modified:
brcm2708 @docs:techref:targets
3 Hits, Last modified:
OpenWrt v21.02.2 Changelog @releases:21.02
3 Hits, Last modified:
OpenWrt 22.03.0-rc4 Changelog @releases:22.03
2 Hits, Last modified:
OpenWrt 22.03.0-rc3 Changelog @releases:22.03
2 Hits, Last modified:
DDNS Client DuckDNS @docs:guide-user:services:ddns
2 Hits, Last modified:
OpenWrt v18.06.1 Changelog @releases:18.06
2 Hits, Last modified:
LEDE v17.01.6 Changelog @releases:17.01
2 Hits, Last modified:
OpenWrt 15.05 "Chaos Calmer" @releases:15.05
2 Hits, Last modified:
Attitude Adjustment @releases:12.09
2 Hits, Last modified:
rsalvaterra @developers
2 Hits, Last modified:
  • Last modified: 2022/09/05 19:03
  • by hauke