Search

You can find the results of your search below.

Raspberry Pi @toh:raspberry_pi_foundation
109 Hits, Last modified:
====== Raspberry Pi ====== The Raspberry Pi is a [[wp>single-board computer]] without an [[docs:techref:hardware:switch|Ethernet Network Switch]]. Raspberry Pi 1 and Zero support only soft-float (armel) which is slower than hard-float. Raspberry Pi 2 and 3 are compiled with the ARM hard-float kern
OpenSSL benchmarks @docs:guide-user:perf_and_log
18 Hits, Last modified:
5 | 248.2 | 281.5 | | r44379 | Broadcom BCM2709 | Raspberry PI 2 Model B | ARMv7 Processor rev 5 (v7l) | 38.40 *... 6 | 144.7 | 119.0 | | r44379 | Broadcom BCM2709 | Raspberry PI 2 Model B | ARMv7 Processor rev 5 (v7l) | 38.4 | ... ude Adjustment (12.09) | Broadcom BCM2708 | [[toh:raspberry_pi_foundation:raspberry_pi| Raspberry Pi Model B]] | ARM1176JZF-S | 697.95 | 1.0.1e | 1322... 58.2 | 5.8 | 4.7 | | r10121 | Broadcom BCM2710 | Raspberry Pi 3 B+ | 1.4GHz 64-bit 4 core ARM Cortex A53 | 38.4
OpenWrt v22.03.0 Changelog @releases:22.03
13 Hits, Last modified:
</nowiki>** <nowiki>fix firmware is not exist for raspberry pi compute 4</nowiki> //<color #ccc>(</color><color ... escription:** <nowiki>RTC modules not enabled for Raspberry Pi</nowiki>\\ **Link:** [[https://github.com/openwrt
Serial Cables @docs:techref:hardware
12 Hits, Last modified:
oryID=167&title=TTL-232R-RPi |FTDI's TTL-232R-RPi Raspberry Pi / 3.3v boards (£)]] You may need to rewire the t... program micro processors) can be downloaded from raspberry's web page //(from the Software Utilities section of the Raspberry Pi Pico documentation page. Click on the Raspberry Pi Pico section, scroll down to Software Utilities, and download the UF2 under "Debugging using another Raspberry Pi Pico")// Then you should only wire (and disregard
stintel @developers
12 Hits, Last modified:
| | | Ubiquiti Unifi AP AC Pro | 1 | | bcm27xx | Raspberry Pi 3A+ | 1 | | | Raspberry Pi 3B+ | 2 | | | Raspberry Pi 4B 1GB | 1 | | | Raspberry Pi 4B 4GB | 1 | | | Raspberry Pi Zero W | 5 | | | Raspberry Pi Zero 2 W | 1 | | ipq4
TP-Link Archer MR200 v1 @toh:tp-link
10 Hits, Last modified:
ery is possible by using a CH340a Programmer or a Raspberry Pi, SOIC8 connector/adapter is required, refer to **... rom the board. SOIC8 Adapter is required. **For Raspberry Pi** | Flash Pin | Meaning | Raspberry Pi | | 1 | CS | 24 | | 2 | DO ... ions between the flash chip and the programmer or Raspberry Pi, refer to **Connecting to Flash Chip** for more i
OpenWrt v22.03.0-rc1 Changelog @releases:22.03
9 Hits, Last modified:
</nowiki>** <nowiki>fix firmware is not exist for raspberry pi compute 4</nowiki> //<color #ccc>(</color><color ... <nowiki>rockchip:</nowiki>** <nowiki>rename "Rock Pi 4" to "Rock Pi 4A"</nowiki> //<color #ccc>(</color><color #282>+5</color><color #ccc>,</color><color ... >sunxi:</nowiki>** <nowiki>add support for Banana Pi M2 Berry</nowiki> //<color #ccc>(</color><color #
TP-Link TL-WPA8630P v2 @toh:tp-link
6 Hits, Last modified:
e"). You can also use a 3.3V UART on an SBC (e.g. Raspberry Pi), but it might be inconsisent when capturing earl... on/Coreboot-ThinkPads/wiki/Hardware-Flashing-with-Raspberry-Pi|Raspberry Pi]]) * ''flashrom'' >= 1.2 Instructions: * Sep
Irqbalance @docs:guide-user:services
6 Hits, Last modified:
letion interrupts Err: 0 </code> [[toh:raspberry_pi_foundation:raspberry_pi|Raspberry Pi 4]]: <code> CPU0 CPU1 CPU2
AdGuard Home @docs:guide-user:services:dns
5 Hits, Last modified:
builds. An alternative option could be to use a Raspberry Pi Zero plugged into your routers USB port to run AGH. [[https://forum.openwrt.org/t/raspberry-pi-zero-as-a-router-attached-ethernet-gadget/112329|Using a Pi Zero for AGH]]. ==== DNS latency/performance ===
SD card @docs:guide-user:installation:installation_methods
4 Hits, Last modified:
[[toh:pcengines:apu#installation1|APU]] * [[toh:raspberry_pi_foundation:raspberry_pi#how_to_flash_openwrt_to_an_sd_card|RPi]] * [[do
Raspberry Pi @toh:hwdata:raspberry_pi_foundation
4 Hits, Last modified:
====== Raspberry Pi ====== ~~NOTRANS~~ **Techdata + Device pages** ---- datatable ---- cols : %title%, Device... header : Techdata page, Device page filter : %class%=techdata filter : Brand=Raspberry Pi sort : %title% ----
Creator Ci40 (Marduk) 02KZ/5+ @toh:creator
4 Hits, Last modified:
faces for external Click boards | ^ Raspberry Pi Interface | Raspberry Pi B+ interface (not simultaneous with Click boards)
TP-Link TL-WR741ND @toh:tp-link
2 Hits, Last modified:
overy_for_TL_MR3020]]. I would recommend you use Raspberry Pi for TFTP server. And you need to connect to seri
OpenWrt 22.03.0-rc3 Changelog @releases:22.03
2 Hits, Last modified:
escription:** <nowiki>RTC modules not enabled for Raspberry Pi</nowiki>\\ **Link:** [[https://github.com/openwrt
SoC (System on a Chip) @docs:techref:hardware
2 Hits, Last modified:
OpenWrt v21.02.2 Changelog @releases:21.02
2 Hits, Last modified:
OpenWrt 22.03.0-rc4 Changelog @releases:22.03
2 Hits, Last modified:
Pine64 PINE A64+ @toh:pine64
2 Hits, Last modified:
Pine64 RockPro64 v2.1 @toh:pine64
2 Hits, Last modified:
rsalvaterra @developers
2 Hits, Last modified:
  • Last modified: 2022/09/05 19:03
  • by hauke