Search

You can find the results of your search below.

Arcadyan WE420223-99 @inbox:toh:arcadyan:astoria
188 Hits, Last modified:
lash chip ==== === Connecting the flash chip to a Raspberry Pi === A Raspberry Pi can be used to program the flash chip in-circuit (thanks FPSUsername for discovering). On the Raspberry Pi, install ''xxd libubootenv-tool mtd-utils'' using ''apt'' on Raspberry Pi OS. To access the flash chip we have a specially ... p directly to the [[https://pinout.xyz/pinout/spi|Raspberry Pi's SPI pins]]. Use the following connections: {{:
Creator Ci40 (Marduk) 02KZ/5+ @toh:creator
54 Hits, Last modified:
faces for external Click boards | ^ Raspberry Pi Interface | Raspberry Pi B+ interface (not simultaneous with Click boards)... s, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ /* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}} ... */ /* Thanks, your wiki administration - Oct. 2015 */ {{media:Creator:Ci40_Marduk_front.jpg?0x40
BT Home Hub 2.0 Type A @toh:bt
114 Hits, Last modified:
m of JTAG hardware** (although this can be just a Raspberry Pi). According to a couple of [[http://openwrt.ebil... t firmware: * [[https://github.com/oxplot/tjtag-pi|tjtag-pi]] via a Raspberry Pi has been used [[https://forum.openwrt.org/viewtopic.php?pid=282665#p282665|three times successfully]], at least once [[https://forum.openwrt.org/viewtopic.php?pid=317966#... h:custom /window:1e000000 /start:1e000000 /length:20000 /wiggler /BE =======================
OpenSSL benchmarks @docs:guide-user:perf_and_log
292 Hits, Last modified:
| Raspberry PI 2 Model B ... | Raspberry PI 2 Model B ... | [[toh:raspberry_pi_foundation:raspberry_pi| Raspberry Pi Model B]] | ARM1176JZF-S ... | Raspberry Pi 3 B+
SoC (System on a Chip) @docs:techref:hardware
3 Hits, Last modified:
dware:soc:soc.broadcom.bcm33xx]] === brcm2708 (= Raspberry Pi) === * OpenWrt support is WIP * no, there are... ll ==== === orion === Marvell MV88F**5**18x/MV88F528x * ->[[docs:techref:hardware:soc:soc.marvell]]... marvell]] ==== Moschip ==== === mcs814x === Only 2 known devices (supported). [[https://oldwiki.arch
SD card @docs:guide-user:installation:installation_methods
5 Hits, Last modified:
d. Common devices that use this procedure include Raspberry Pi and NanoPi. ==== Graphical Utilities ==== Inst... appropriately - e.g. /dev/sda PARTITION="$DEVICE"2 FS_SIZE="$(sudo unsquashfs -s "$PARTITION" | grep... appropriately - e.g. /dev/sda PARTITION="$DEVICE"2 sudo cfdisk "$DEVICE" # select resize, then writ... p://bugs.openwrt.org/index.php?do=details&task_id=2951|link]] or [[docs:guide-user:installation:openw
Devicepage with forum link + search 2 @playground
95 Hits, Last modified:
re the connections between the flash chip and the Raspberry Pi. The chip does not need to be de-soldered from th... ed a pomona 8 pin SOIC connector connected to the raspberry pi with the following connections. Only the raspberry pi needs to be powered. The router was not connected... | Enable SPI communication on the raspberry pi. <code> $ sudo raspi-config 9 - Advanced Options ... 05_1476936302791w.zip’ saved [33320162/33320162] pi@raspberrypi:~/flashrom $ mv Archer_MR200\(EU\)_V1_160905_1476936302791w.zip original_fw.zip pi@raspberrypi:~/flashrom
VONETS VAR11N-300 @toh:vonets
20 Hits, Last modified:
ron.info/recover-bricked-bios-using-flashrom-on-a-raspberry-pi/ as a guide for both physical connection as well ... flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=2000 -r vonets-var11n-300.bin` to get the existing ... =vonets_var11n-300.bin of=var11n-300-base.bin bs=327680 count=1` to extract the base from the original firmware (50000 hex converted to decimal is 327680) - use `cat var11n-300-base.bin openwrt-18.
Pine64 PINE A64+ @toh:pine64
30 Hits, Last modified:
port, expansion port for optional Bluetooth 4.0/802.11 b/g/n expansion board, Raspberry Pi compatible 40-pin GPIO header, 34 pin Euler Bus a... am and 10/100 ethernet while PINE A64+ provides 1024/2048Mb Ram and gigabit ethernet. OpenWrt build target [[docs:techref:targets:sunxi|sunxi]] cortexa... usly configured. * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' * Upload .bin fi
TP-Link TL-WPA8630P v2 @toh:tp-link
123 Hits, Last modified:
on/Coreboot-ThinkPads/wiki/Hardware-Flashing-with-Raspberry-Pi|Raspberry Pi]]) * ''flashrom'' >= 1.2 Instructions: * Sep... e"). You can also use a 3.3V UART on an SBC (e.g. Raspberry Pi), but it might be inconsisent when capturing earl... tion parameters\\ for TP-Link TL-WPA8630P v2 | 115200, 8N1 | ===== Bootloader mods ===== -> [[docs:... on. <WRAP bootlog> <nowiki> U-Boot 1.1.4 (Oct 18 2017 - 09:53:45) ap152 - Dragonfly 1.0 DRAM: 128
TP-Link Archer MR200 v1 @toh:tp-link
12 Hits, Last modified:
ery is possible by using a CH340a Programmer or a Raspberry Pi, SOIC8 connector/adapter is required, refer to **... rom the board. SOIC8 Adapter is required. **For Raspberry Pi** | Flash Pin | Meaning | Raspberry Pi | | 1 | CS | 24 | | 2 | DO ... ions between the flash chip and the programmer or Raspberry Pi, refer to **Connecting to Flash Chip** for more i
Arcadyan AR7516 (aka EE Brightbox 1) @toh:arcadyan
71 Hits, Last modified:
ul soldering (or a SOIC clip), the right wires, a Raspberry Pi/BeagleBone Black/etc and a copy of ''flashrom'', ... Thomson for JTAG) so it might be some other BCM6328 interface, or a JTAG interface to something else... [[http://forums.thinkbroadband.com/freeserve/4091269-orange-bright-box-hidden-config-pages-new.html ... to start [[http://www.the-scream.co.uk/forums/t31206.html | telnet]] too. Older Orange models can b
MikroTik RB750Gr3 (non-native support, obsoleted with OpenWrt-19.07) @toh:mikrotik
46 Hits, Last modified:
ino]] or a [[https://www.flashrom.org/RaspberryPi|Raspberry Pi]]. == Constructing the image == It's possible ... | 192 KiB | | u-boot-env.bi... u-boot.bin u-boot-env.bin factory.bin lede-17.01.2-ramips-mt7621-rb750gr3-squashfs-sysupgrade.bin > final.bin == Flashing the image to the chip ==
Astoria Networks / Arcadyan ARV7519RW22-A-LT (Orange Livebox 2.1) @toh:arcadyan
316 Hits, Last modified:
etup serial console conection (Its posible to use Raspberry Pi and it's UART I/O port) **Attention do it with a ... sole. - TFTP Server to send files to router. **2. Prepare the serial console** - Prepare the ser... h U-boot** - Launch picocom \\ '' picocom -b 115200 /dev/ttyUSB0'' - Power on the device - Inme... will see the message\\ '' Enter command mode ...123 Key='' - Paste the password: //Oh!123Go// \\
Pine64 RockPro64 v2.1 @toh:pine64
30 Hits, Last modified:
RockPro64 | 3.3V, 1500000 baud, 8N1 | //Standard Raspberry Pi GPIO header pinout:// More info about UART connec... rt bootlog ==== <WRAP bootlog> <nowiki>U-Boot TPL 2020.01 (Apr 09 2020 - 14:11:44) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16
Meraki MR18 @toh:meraki
26 Hits, Last modified:
Aruba AP-105 @toh:aruba
42 Hits, Last modified:
Huawei EchoLife HG553 @toh:huawei
27 Hits, Last modified:
TP-Link TL-WR741ND @toh:tp-link
34 Hits, Last modified:
Raspberry Pi @toh:raspberry_pi_foundation
333 Hits, Last modified:
OpenWrt 23.05.0 Changelog @releases:23.05
1779 Hits, Last modified:
CrowdSec @docs:guide-user:services
43 Hits, Last modified:
stintel @developers
24 Hits, Last modified:
AdGuard Home @es:docs:guide-user:services:dns
11 Hits, Last modified:
Irqbalance @docs:guide-user:services
14 Hits, Last modified:
OpenWrt SystemReady @docs:guide-user
7 Hits, Last modified:
OpenWrt 23.05.0-rc3 Changelog @releases:23.05
91 Hits, Last modified:
OpenWrt 22.03.0-rc4 Changelog @releases:22.03
58 Hits, Last modified:
OpenWrt v23.05.0-rc1 Changelog @releases:23.05
1574 Hits, Last modified:
  • Last modified: 2024/01/03 12:05
  • by aparcar