Search

You can find the results of your search below.

ASUS TUF-AX4200 @toh:asus
38 Hits, Last modified:
rts and up to 2.5 Gigabit WAN port. Supports also link aggregation on LAN up to 2 Gbit/s. /*****/ /* Ho... e tftp image | see **initramfs** link above | ^ TFTP client required IP address | ... 3: 16 PPIs implemented GICv3: no VLPI support, no direct LPI support GICv3: CPU0: found redistributor 0... , rx_imp f, tx_imp e mtk-pcie 11280000.pcie: PCIe link down, ltssm reg val: 0x0 mtk-pcie: probe of 11280
Google Wifi @toh:google
36 Hits, Last modified:
**Notes:** * A SuzyQ cable only works in one direction. If it doesn't work one way, try flipping t... ector. * CCD debug features are only enabled by directly attaching to the device's USB port. It does ... ing resources... Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done Done reading resources. Show resources in subtree (Roo
GL.iNet GL-MT6000 @toh:gl.inet
56 Hits, Last modified:
, dual-band, 4x4, 2 x 2.5Gbit WAN, 4 x 1Gbit LAN, link aggregation, 1GB DDR4 RAM, 8GB eMMC storage, and ... t WED [[https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-aql-and-wifi-latency/155930/58/|appears ... aka airtime fairness. More information is [[:toh:linksys:e8450#wireless_ethernet_dispatch_wed_hw_accele... openwrt/commit/590eaaeed59a9eb6637a1480587fc410de182523|commit]]. It is not recommended to change these
Routerich AX3000 @toh:routerich
23 Hits, Last modified:
achable antennas. {{ :media:routerich:ax3000.jpg?direct&400 |Routerich AX3000}} ===== Supported Versi... * * of the firmware for this device. Provide links to firmware images, * * active t... Jump to BL NOTICE: BL2: v2.7(release):ca9b8f564-dirty NOTICE: BL2: Built : 11:37:21, May 11 2023 NOT... oting BL31 NOTICE: BL31: v2.7(release):ca9b8f564-dirty NOTICE: BL31: Built : 11:37:24, May 11 2023 NO
Rostelecom RT-FE-1A @toh:rostelecom
31 Hits, Last modified:
* * of the firmware for this device. Provide links to firmware images, * * active t... ********* PCIE2 no card, disable it(RST&CLK) pcie_link status = 0x3 RALINK_RSTCTRL= 3000000 *** Configur... set_fe_HSDMA_glo_cfg HSDMA_GLO_CFG = 465 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled seri... 00c GMAC1_MAC_ADRL -- : 0x43288045 <0> !! create link_status PROC !!!!! PROC INIT OK! Ralink APSoC Hard
AVM FRITZ!Box 7520 / 7530 @toh:avm
9 Hits, Last modified:
ot-fritz7530 subdirectory]]. Place it in the same directory as the ''[[https://github.com/openwrt/openw... x. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following comma... ramfs** (!) image to a installed TFTP server root directory (see instructions here: [[:docs:guide-user:... with both WiFis active and one 1 Gigabit Ethernet link established without much traffic. Power consumpti
Xiaomi Mi AIoT Router AX3600 @toh:xiaomi
28 Hits, Last modified:
-initramfs-factory.ubi'' to the router's ''/tmp'' directory - Check which ''rootfs'' partition is you... _ax3600-squashfs-sysupgrade.bin'' to the ''/tmp'' directory - Sysupgrade the device:<code>sysupgrade ... "ethaddr="00:AA:BB:CC:DD:10"" into hash table PCI Link Intialized PCI1 is not defined in the device tree... llocator initialised with 65536 entries [ 0.051825] MSM Memory Dump base table set up [ 0.051850]
Arcadyan / Astoria AW1000 @toh:arcadyan:astoria
48 Hits, Last modified:
220000 [ 1.476428] qcom-pcie 20000000.pci: phy link never came up [ 1.477986] qcom-pcie 20000000.p... 220000 [ 2.626430] qcom-pcie 10000000.pci: phy link never came up [ 2.627988] qcom-pcie 10000000.p... rtitions found on MTD device qcom_nand.0 [ 3.508257] Creating 26 MTD partitions on "qcom_nand.0": [ ... s/cgroup/net_cls,net_prio failed: No such file or directory mount: mounting cgroup on /sys/fs/cgroup/pe
Xiaomi Redmi AX6000 @toh:xiaomi
102 Hits, Last modified:
startup (tested in verion 1.0.48) would be: From direct connected LAN port (address will be assigned b... fi </code> If you want, you can directly paste this command in the connected terminal... ramfs-factory.ubi </code> NOTE: If you want to go directly to the ubootmod version and you know what yo... can use ubootmod initramfs version here and jump directly to step 4 of ubootmod installation instructi
Xiaomi AX3200 / Redmi AX6S @toh:xiaomi
52 Hits, Last modified:
uter-ax6s-xiaomi-router-ax3200/111085/936?u=alexq|Link to owrt forum]] * **"netmode: 4" method** - wit... ''factory.bin'' - On your computer, in the same directory where the file ''factory.bin'' is located, ... ps://github.com/openwrt/openwrt/pull/11814|Github link]] * [[https://forum.openwrt.org/t/adding-openwr... uter-ax6s-xiaomi-router-ax3200/111085/715?u=alexq|Link to owrt forum]]. -> [[docs:guide-user:installa
Creator Ci40 (Marduk) 02KZ/5+ @toh:creator
8 Hits, Last modified:
l /tmp RAM drive on your OpenWrt system. The /tmp directory is stored in RAM (using tmpfs), not in the ... pts to load br_netfilter if you need this. [ 1.825711] 8021q: 802.1Q VLAN Support v1.8 [ 1.836840... usb-storage 1-1:1.0 [ 3.315720] scsi 0:0:0:0: Direct-Access Corsair Voyager 1100 PQ: ... [ 15.220211] stmmaceth 18140000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 15.25
Iomega ix4-200d @toh:iomega
11 Hits, Last modified:
ess Root Complex Interface PEX interface detected Link X1 SCSI: AHCI 0001.0000 32 slots 3 ports 3 Gbps ... : Marvell XOR: ( xor cpy ) [ 0.953717] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ ... mber 3 using orion-ehci [ 5.043288] ata1: SATA link down (SStatus 0 SControl F300) [ 5.144221] usb... Storage device detected [ 5.188212] ata3: SATA link down (SStatus 0 SControl 300) [ 5.194065] scsi
GL.iNet GL-MV1000 (Brume) / GL.iNet GL-MV1000W (Brume-W) @toh:gl.inet
37 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... .g. ''ip addr add dev $yournic 192.168.1.2/24; ip link set $yournic up''. If you’re already in an ''192.... .5 Gbps Comphy-2: SATA0 6 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps... ncq led only pmp fbss pio slum part sxs PCIE-0: Link down MMC: sdhci@d8000: 0, sdhci@d0000: 1 SF: De
Sinovoip BananaPi BPi-R64 V1.1, V1.2 @toh:sinovoip
25 Hits, Last modified:
NETDEV_CHANGE): eth0: link becomes ready [ 10.318250] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode [ 10.325748] 8021q: adding VLAN 0 to HW fi... mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode [ 10.380885] 8021q: adding VLAN 0 to HW fi... mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode [ 10.419053] 8021q: adding VLAN 0 to HW fi... mt7530 mdio-bus:00 lan4: configuring for phy/gmii link mode [ 10.458043] 8021q: adding VLAN 0 to HW fi
ASUS RT-AX53U / RT-AX1800U @toh:asus
48 Hits, Last modified:
ownload the OpenWrt image, place it into you root directory of your TFTP-server, fire up your TFTP-serv... www.asus.com/support/FAQ/1000814/]] * Check the Link for OEM software, unzip downloaded trx file and use with Asus Restoration Tool as described on link above [[https://www.asus.com/networking-iot-serve... ersion 22.03.4), you can use the following method directly from OpenWRT: * Rename the asus stock firm
BT Home Hub 2.0 Type A @toh:bt
24 Hits, Last modified:
TP-Link Archer C6 v2 @toh:tp-link
48 Hits, Last modified:
TP-Link EAP615-Wall v1 @toh:tp-link
67 Hits, Last modified:
FriendlyARM NanoPi R4S @toh:friendlyarm
10 Hits, Last modified:
Dynalink DL-WRX36 @toh:dynalink
12 Hits, Last modified:
Check Point L-50 @toh:check_point
24 Hits, Last modified:
Ubiquiti UniFi 6 LR @toh:ubiquiti
33 Hits, Last modified:
Ubiquiti UniFi 6 Lite @toh:ubiquiti
32 Hits, Last modified:
MERCUSYS MR90X v1 @toh:mercusys
72 Hits, Last modified:
Arcadyan VRV9510KWAC23 (Livebox Next) @toh:arcadyan
44 Hits, Last modified:
  • Last modified: 2024/01/03 12:05
  • by aparcar