Search
You can find the results of your search below.
Fulltext results:
- NETGEAR GS108T v3
- -- The OpenWrt **ramdisk** image can be flashed directly from the Netgear web UI. Netgear designates ... tional serial connection and TFTP server. See the links above if needed. * Power up the switch, and i... 534] Probing RTL838X GPIOs [ 1.081087] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ ... h switch@bb000000: configuring for fixed/internal link mode [ 6.642892] DSA: tree 0 setup [ 6.6463
- Netgear R6220
- disk, plug to usb port on the router - Call the link: ''%%http://192.168.1.1/setup.cgi?todo=debug%%'' ... and sniff the first few packages after boot. Try directing nmrpflash at that mac and start it right as... ********* PCIE1 no card, disable it(RST&CLK) pcie_link status = 0x5 RALINK_RSTCTRL= 5000000 *** Configur... = 218 spdif_mod_init: start SPDIF module Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled seri
- Netgear WNDR3400
- apTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB A... 388 kB VmallocUsed: 3412 kB VmallocChunk: 782516 kB </code> == Boot from /proc/kmsg == <WRAP bo... io scheduler noop registered (default) <6>Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ s... 0.1_akm= password_answer2= lang_check_config_file_dir=stringtables pptp_dod=1 wla_key2_2= 0:pa1hib0=0xf
- Netgear MBR1310
- apTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB A... 8) io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ s... : Mounting ramfs on /home failed: No such file or directory mount: Mounting ramfs on /mnt failed: No such file or directory mkdir: Cannot create directory `/mnt/shares
- NETGEAR WNDR4300 v1
- | | 3 | LED wan amber | | | **4** | R204 / R597 - direct to SoC | {{:media:netgear:wndr4300:wndr4300-serial_port.jpg?linkonly|}} | | 5 | SPI CS0# - not connected| {{:media:netgear:wndr4300:wndr4300-spi-gpios.jpg?linkonly|}}\\ {{:media:netgear:wndr4300:wndr4300-gpios_bottom.jpg?linkonly|}} | | 6 | SPI CLK - not connected | ::: | | ... {:media:netgear:wndr4300:wndr4300-serial_port.jpg?linkonly|}} | | 10 | UART0 serial OUT | ::: | | 11 | L
- Netgear R6260
- s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... ********* PCIE2 no card, disable it(RST&CLK) pcie_link status = 0x3 RALINK_RSTCTRL= 3000000 *** Configur... = 217 spdif_mod_init: start SPDIF module Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled seri... mounting none on /dev/pts failed: No such file or directory mount: mounting none on /proc/bus/usb faile
- Netgear WNR3500U/WNR3500L
- cheduler deadline registered (default) <6>Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ s... 9536 0 # ifconfig -a br0 Link encap:Ethernet HWaddr E0:91:F5:7A:AD:84 ... inet6 addr: fe80::e291:f5ff:fe7a:ad84/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:150... 90.6 KiB) TX bytes:378572 (369.6 KiB) eth0 Link encap:Ethernet HWaddr E0:91:F5:7A:AD:85
- Netgear D7800
- s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... erating systems change the IP rather quickly to a link-local 196.254.x.x address if there is no DHCP ser... 0x08000000 [ 0.172426] qcom-pcie 1b500000.pci: link up [ 0.172587] qcom-pcie 1b500000.pci: PCI hos... 0x2e000000 [ 0.287703] qcom-pcie 1b700000.pci: link up [ 0.287846] qcom-pcie 1b700000.pci: PCI hos
- Netgear R7500
- /*****/ {{:media:netgear:r7500_general_view.png?direct&400|}} <WRAP BOX> FIXME ===== Getting started... s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... label://\\ {{:media:netgear:r7500_back_casing.jpg?direct&400|}} ==== Opening the case ==== **Note:** ... cific device:\\ {{:media:netgear:r7500_serial.jpg?direct&400|}} <WRAP BOX> FIXME //Replace EXAMPLE by
- Netgear R7800 (Nighthawk X4S AC2600)
- erating systems change the IP rather quickly to a link-local 196.254.x.x address if there is no DHCP ser... arning - bad CRC, using default environment PCI0 Link Intialized PCI1 Link Intialized In: serial Out: serial Err: serial 131072 bytes read: OK MMC De... arning - bad CRC, using default environment PCI0 Link Intialized PCI1 Link Intialized In: serial Out
- Netgear WNDR4700 and WNDR4720
- es (cached) 256k L2-cache enabled PCIE0: Checking link... PCIE0: Device detected, waiting for link... PCIE0: link is up ! PCI host bridge /plb/pciex@d00000000 (primary) ranges: MEM 0x0000000e00000000..... 3 Generic non-volatile memory driver v1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled seria
- Netgear R6100
- | The yellow "Internet" port is connected directly to the other CPU port, eth0. It is not part... eth0, eth1 Hit any key to stop autoboot: 0 eth1 link down eth0 link down Client starts...[Listening] for ADVERTISE...TTT Retry count exceeded; boot the im... o scheduler deadline registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled seri
- NETGEAR WPN824N
- 26 reset done eth1 up eth0, eth1 Trying eth1 eth1 link down FAIL Trying eth0 eth0 link down FAIL Client starts...[Listening] for ADVERTISE...TTT Retry count... raphic API io scheduler noop registered Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharin... 08000 Setting PHY... ADDRCONF(NETDEV_UP): eth0: link is not ready device eth1 entered promiscuous mod
- Netgear R6200 v1
- * * of the firmware for this device. Provide links to firmware images, * * active t... 8) io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ s... g/netatalk/AppleVolumes.default': No such file or directory cp: cannot stat '/usr/config/avahi/services/http.service': No such file or directory cp: cannot stat '/usr/config/avahi/services
- Netgear WNDR4300 v2
- s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... eth0 link down ... lt) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled ... : cannot stat '/etc/wpa2.orig/*': No such file or directory To set s17 LOOKUP_CTRL_R