Search
You can find the results of your search below.
Fulltext results:
- EnGenius ECB1750
- +<C> $ </code> - run 'sysupgrade' and download directly the firmware <code> curl 'http://192.168.1.... boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),8256k(mib0),64k(ART) bootcmd=bootm 0x9f050000 bootdel... uboot_ver=1.0.0.1 bundle_ap_mac=00:aa:bb:cc:dd:15 dir= lu=tftp 0x80060000 ${dir}u-boot.bin&&erase 0x9f000000 +$filesize&&cp.b $fileaddr 0x9f000000 $filesize
- EnGenius ENS620EXT
- oc_memtype_m0_m2 = 2222222 [ 0.211867] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ ... init start [ 9.895441] enable ess clk [ 10.008252] reset ok in probe! [ 10.011136] PHY ID is 0x4... 11.921522] qca-nss-drv.ko is loaded for symbol link [ 11.927387] sit: IPv6 over IPv4 tunneling driv... nnel: 5775 [ 18.750095] Skipping VHT80 channel 5825 [ 18.753905] ol_regdmn_init_channels: !avail mo
- EnGenius EAP300 v2
- o scheduler deadline registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled seri... preinit - switching to jffs2 mini_fo: using base directory: / mini_fo: using storage directory: /jffs - init - Please press Enter to activate this console... d Length Error frames ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link
- EnGenius ENS202EXT 1.0.0
- s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... port, serial port cable, etc. Solder a header or direct wires to the contacts marked as TX,RX and GND ... o scheduler deadline registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled seri... preinit - switching to jffs2 mini_fo: using base directory: / mini_fo: using storage directory: /jffs
- EnGenius EAP1300
- 1593]:INFO:Chip version 0x1401 [ 21.884101] qca_link_polling_select[1287]:INFO:link-polling-required node does not exist [ 21.892119] ssdk_switch_register... 22.103546] qca-nss-drv.ko is loaded for symbol link [ 22.110153] sit: IPv6 over IPv4 tunneling driv... rget_write_addr=417e70 seg_info=ced53310 [ 30.688257] ol_transfer_swap_struct:Code swap structure suc
- EnGenius EMR3000v2
- le * Decode .bin via mkseanofw found in staging_dir/host/bin of OpenWrt buildroot\\ <code> ./mksenaof... nset [ 0.090000] ar724x-pci ar724x-pci.1: PCIe link is down [ 0.100000] registering PCI controller... 22 UART_RTS:14 UART_CTS:13 [ 0.730000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ ... d [ 4.800000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready - preinit - Press the [f] key and hi
- EnGenius ESR9753
- e console firmware (firmware.bin) in the C:\ root directory. Then I started the TFTP server by hitting ... As it had already been placed in the defined root directory for the TFTP server, all the prompt is aski... _FW.bin ' which should be in the TFTP server Root Directory. Windows Firewall must be OFF\\ 8] After fl... dline registered (default) [ 0.390000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [