Search

You can find the results of your search below.

NETGEAR WAX220
118 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... * * of the firmware for this device. Provide links to firmware images, * * active t... oting BL31 NOTICE: BL31: v2.6(release):64c0c710d-dirty NOTICE: BL31: Built : 11:38:50, Sep 7 2022 ... emented [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found
NETGEAR WAC124
83 Hits, Last modified:
r Ethernet cable if you are connecting the device directly to your computer. ===== Upgrading OpenWrt =... ********* PCIE2 no card, disable it(RST&CLK) pcie_link status = 0x3 RALINK_RSTCTRL= 3000000 *** Configur... mounting none on /dev/pts failed: No such file or directory mount: mounting none on /proc/bus/usb failed: No such file or directory mknod: /dev/fuse: File exists Welcome to
NETGEAR R7800 (Nighthawk X4S AC2600)
63 Hits, Last modified:
en select the **Proceed to 192.168.1.1 (unsafe)** link. - Login to OpenWrt with the default OpenWrt us... erating systems change the IP rather quickly to a link-local 196.254.x.x address if there is no DHCP ser... tftp mode. - Open a terminal and ''cd'' to the directory where the ''factory.img'' is located. Conne... arning - bad CRC, using default environment PCI0 Link Intialized PCI1 Link Intialized In: serial Out
NETGEAR WAX206
40 Hits, Last modified:
ng, the auto-negotiation worked fine to bring the link up at 2500Mbps and I could manually force this link down to 1000Mbps with ethtool. ===== Hardware High... th both WiFis active and three 1 Gigabit Ethernet links established without much traffic. Power consumpt... mt7531_set_portmt7531: timeout waiting for SGMII_LINK mt7531: mt7531_mac_port_setup, PMCR6 = f805633b >
NETGEAR WNR3500 v2
35 Hits, Last modified:
uild an image with the "wl" driver prepare to get dirty with cli setup of AP/STA mode since uci/luci we... 20080 0 [wl igs] # ifconfig -a br0 Link encap:Ethernet HWaddr C0:3F:0E:5C:0E:76 ... (136.4 kb) TX bytes:198603 (193.9 kb) eth0 Link encap:Ethernet HWaddr C0:3F:0E:5C:0E:77 ... Interrupt:4 Base address:0x2000 eth1 Link encap:Ethernet HWaddr C0:3F:0E:5C:0E:76
NETGEAR WN3000RP v1
27 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... 9616 0 (unused) # ifconfig -a br0 Link encap:Ethernet HWaddr AA:BB:CC:DD:EE:11 ... (482.5 kb) TX bytes:584915 (571.2 kb) eth0 Link encap:Ethernet HWaddr AA:BB:CC:DD:EE:11 ... Interrupt:4 Base address:0x2000 eth1 Link encap:Ethernet HWaddr AA:BB:CC:DD:EE:11
NETGEAR WN2500RP v1
22 Hits, Last modified:
ttps://forum.archive.openwrt.org/viewtopic.php?id=50571|OpenWrt forum archive]] ===== LAN/WAN router ... 3236b for chip BCM43236/3 [ 816.533189] usb 1-2: Direct firmware load for brcm/brcmfmac43236b.clm_blob... /etc/modules.d/* ifconfig -a #cropped wlan0 Link encap:Ethernet HWaddr 00:90:4C:52:A8:E4 ... ot come up again(lsusb shows only hub) and is not directly related to b43 since the following dmesg out
NETGEAR MBR1310
19 Hits, Last modified:
apTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB A... : Mounting ramfs on /home failed: No such file or directory mount: Mounting ramfs on /mnt failed: No such file or directory mkdir: Cannot create directory `/mnt/shares': No suchusb 1-1.3: new high speed USB device using
NETGEAR WNR3500U/WNR3500L
19 Hits, Last modified:
9536 0 # ifconfig -a br0 Link encap:Ethernet HWaddr E0:91:F5:7A:AD:84 ... inet6 addr: fe80::e291:f5ff:fe7a:ad84/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:150... 90.6 KiB) TX bytes:378572 (369.6 KiB) eth0 Link encap:Ethernet HWaddr E0:91:F5:7A:AD:85 ... inet6 addr: fe80::e291:f5ff:fe7a:ad85/64 Scope:Link UP BROADCAST RUNNING PROMISC ALLMULTI M
NETGEAR WAC510
10 Hits, Last modified:
* * of the firmware for this device. Provide links to firmware images, * * active t... can't execute '/usr/bin/log_ro': No such file or directory [syslog] Starting Tran... 1;0mawk: /tmp/bridge_vlan_script: No such file or directory awk: /tmp/bridge_dhcpc_script: No such file or directory [dns] Starting Transla
NETGEAR GS108T v3
8 Hits, Last modified:
| The OpenWrt **initramfs** image can be flashed directly from the Netgear web UI. Netgear designates ... nWrt (22.03 and later), you can access the device directly over ethernet without any special VLAN confi... tional serial connection and TFTP server. See the links above if needed. * Power up the switch, and i... orts are up & ready. The LEDs do not indicate any link status as of now. * If pinging succeeds you can
NETGEAR WNDR3400
7 Hits, Last modified:
apTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB A... lash: squash filesystem with lzma found at block 1505 <5>Creating 15 MTD partitions on "sflash": <5>0x0... 0.1_akm= password_answer2= lang_check_config_file_dir=stringtables pptp_dod=1 wla_key2_2= 0:pa1hib0=0xf... wlan_acl_mac24= wps_restart=0 traffic_volume_ctrl_dir=0 bpa_dod=1 wlan_acl_mac25= ipv6_ntp_servers= wla
NETGEAR WN802T
4 Hits, Last modified:
control. It's a TTL serial port, so don't plug it directly into a RS232 port. You have to build a TTL-R... y: accesslog.filename (ignored) *** Creating soft link for syslog binary ln: /bin/syslogd: File exists *... apTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB Mapped: 2188 kB Slab: 5056 kB CommitLimit: 15068 kB Committed_AS: 7
  • Last modified: 2024/01/03 12:05
  • by aparcar