Search

You can find the results of your search below.

mwan3 (Load balancing/failover with multiple WAN interfaces) @docs:guide-user:network:wan:multiwan
17 Hits, Last modified:
ic can be configured in the ''/etc/config/mwan3'' globals section. This is useful if you also use othe... rmally this would be **lan**. <code bash> config globals 'globals' option local_source 'lan' option mmx_mask '0x3F00' </code> After this all traffic o... network. Any attempts to use such services from "unknown" IP addresses will likely result in the traffic b
Network basics /etc/config/network @docs:guide-user:base-system
12 Hits, Last modified:
0.1' network.loopback.netmask='255.0.0.0' network.globals=globals network.globals.ula_prefix='fd27:70fa:5c1d::/48' network.lan=interface network.lan.type='bridge'... 0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd27:70
Setting up Wi-Fi repeaters with multiple SSIDs with separated private, tor and guest network @docs:guide-user:network:wifi
12 Hits, Last modified:
r '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fdfb:7e04:aca7::/48' config interface 'lan' option type 'bridge'... ed' list icmp_type 'bad-header' list icmp_type 'unknown-header-type' list icmp_type 'router-solicitation... ed' list icmp_type 'bad-header' list icmp_type 'unknown-header-type' option limit '1000/sec' option fam
Prosody XMPP Server (open messaging protocol) @docs:guide-user:services
4 Hits, Last modified:
cd /tmp/roster # Make a list echo "acoul almursi glp hauke jow juhosg maddes nbd nilfred orca thelexi... cd /tmp/roster # Make a list echo "acoul almursi glp hauke jow juhosg maddes nbd nilfred orca thelexi... value" + ;; + *) + echo "Error: Unknown flag: $1" + exit 1 + ;; + esac + sh... LD="$value" - ;; - *) - echo "Error: Unknown flag: $1" - exit 1 - ;; - esac - sh
OpenWrt Buildroot – Technical Reference @docs:techref
4 Hits, Last modified:
HVER ?= $(KERNEL) # disable the md5sum check for unknown kernel versions LINUX_KERNEL_MD5SUM:=$(LINUX_KERN... itions errors with user space headers. uclibc and glibc dont need these changes. Example: <code> 095-... nux-in.h-with-netinet-in..patch 270-uapi-kernel.h-glibc-specific-inclusion-of-sysinfo.h.patch 271-uapi-libc-compat.h-do-not-rely-on-__GLIBC__.patch 272-uapi-if_ether.h-prevent-redefiniti
Printing over SSH @docs:guide-user:services:print_server
4 Hits, Last modified:
n any of these formats: # device-class scheme "Unknown" "device-info" # device-class device-uri "devi... strings use '\' as escape. printf 'direct ssh "Unknown" "%s"\n' "prints via ssh" exit "$CUPS_BACKEND_OK... ort" # use ~/.ssh/config (man ssh_config) to set global or per-host options if [ -n "$ssh_user" ] ... rg";; print) handle_print "$arg";; *) debugf 'unknown protocol command "%s"\n' "$cmd" exit "$CUPS_BAC
Firewall configuration /etc/config/firewall @docs:guide-user:firewall
4 Hits, Last modified:
an two zones, as the rule can then be set as the 'global default' for that zone.// ==== Defaults ==== The ''defaults'' section declares global firewall settings which do not belong to spec... -exceeded'' | | ''address-mask-request'' | ''host-unknown'' | ''port-unreachable'' | ''timestamp-reply'' | ... twork-redirect'' | | ''echo-request'' | ''network-unknown'' | ''router-advertisement'' | ''TOS-network-unre
Security Guide for the Paranoid @docs:guide-user:security
3 Hits, Last modified:
rms. Especially, part of the kernel code remained unknown. This is why LEDE was created : a free community ... for security issues, you may fill them with stone-glue to avoid any opening and we will show you how t... a usual way: install updates, make sure to avoid unknown software, etc ... This zone includes should inclu
USB Benchmarks @docs:guide-user:perf_and_log
3 Hits, Last modified:
43ND]] v1.8 | 2.0 | Attitude Adjustment, r33883 | Unknown Manufacturer, 2GB | 2.0 | ext4 | 89.17 | 13.41 | ... | 2.0 | Attitude Adjustment, r34185 (12.09-rc1) | Unknown Manufacturer,((Presents as "''Kingston Technology... stment, r34185 (12.09-rc1) | SanDisk Corp. Cruzer Glide, 8GB (PID: SDCZ60-008G) | 2.0 | ext4 | 89.17 |
NUT (Network UPS Tools) @docs:guide-user:services:ups
3 Hits, Last modified:
each section (as appropriate) === config driver_global === <WRAP center round important 60%> [[http... | //none// | A way to handle currently unknown (to UCI) parameters | config override 'otherflag... | false | A way to handle currently unknown (to UCI) flags | === config user === **NB** Fro
Samba @docs:guide-user:services:nas
3 Hits, Last modified:
to your needs using ''chown'' and ''chmod''. Any unknown usernames used for authentication against Samba a... and add or change the following entries in the "[global]" section in the template. <code bash> [global] domain master = yes local master = yes name r
IPv6 @docs:guide-user:network:ipv6
3 Hits, Last modified:
ue. <code bash> # cat /etc/config/network config globals globals option ula_prefix fd00:db80::/48 config interface wan6 option proto sta... t, but lan machines get "Destination unreachable: Unknown code 5" or "Source address failed ingress/egress
DNS and DHCP examples @docs:guide-user:base-system
2 Hits, Last modified:
olve the [[https://forum.openwrt.org/t/workaround-gl-ar150-no-dhcp-if-lan-cable-is-not-plugged-during-... ers'', and refuse to hand out any IPv4 address to unknown clients. Note that you shouldn't use this as a s
Logging custom statistics @docs:guide-user:perf_and_log
2 Hits, Last modified:
tion: use ''collectd-mod-exec'' and just a little glue. You'll need to be able to write a script (or ... ultiple readings at a time. Some allow ''U'' for unknown when there is no sensible data (e.g. what's the r
SSHFS client @docs:guide-user:services:ssh
2 Hits, Last modified:
shfs Version: 2.2-1 Depends: libfuse, fuse-utils, glib2, libpthread Provides: Status: unknown ok not-installed Section: net Architecture: ar71xx Maintainer: Op
  • Last modified: 2020/12/09 22:33
  • by hauke