Search

You can find the results of your search below.

Linksys WRT54G, WRT54GL and WRT54GS @toh:linksys
2 Hits, Last modified:
====== Linksys WRT54G, WRT54GL and WRT54GS ====== {{section>meta:infobox:432_warning#infobox_for_data... cm-2.4/openwrt-brcm-2.4-squashfs.trx]]. === WRT54GL === Testing with the WRT54GL 1.1 (16MB RAM, 4MB flash) showed it can run the following versions: ^ ... iewtopic.php?id=51729|Forum Thread]] As the WRT54GL has only 4Mb flash, any image sent to the device
DNS and DHCP configuration examples @docs:guide-user:base-system
2 Hits, Last modified:
olve the [[https://forum.openwrt.org/t/workaround-gl-ar150-no-dhcp-if-lan-cable-is-not-plugged-during-... ers'', and refuse to hand out any IPv4 address to unknown clients. Note that you shouldn't use this as a s
HooToo HT-TM05 @toh:hootoo
4 Hits, Last modified:
d-%H:%M:%S" > /etc/timedate 0.asia.pool.ntp.org: Unknown host /etc/rc.d/rc1.d/S77qos start /etc/rc.d/rc: l... 9650 (MIPS 24KEc) [ 0.000000] MIPS: machine is GL-MT300N [ 0.000000] Determined physical RAM map... - Download this OpenWrt firmware: [[http://www.gl-inet.com/firmware/mt300n/clean/openwrt-gl-mt300n-clean-1.0.bin|Link]] - Place it in the root of a c
GL.iNet GL-S1300 @toh:gl.inet
55 Hits, Last modified:
====== GL.iNet GL-S1300 ====== {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} The GL.iNet GL-S1300 (Convexa-S) is a compact Gigabit Wireless Router and IoT hub featuring a quad-core ARM
OpenWrt v19.07.3 Changelog @releases:19.07
4 Hits, Last modified:
**<nowiki>generic:</nowiki>** <nowiki>ar8216: fix unknown packet flooding for ar8229/ar8236</nowiki> //<col... iki>ar71xx:</nowiki>** <nowiki>use status led for GL.iNet GL-AR750S</nowiki> //<color #ccc>(</color><color #282>+1</color><color #ccc>)</color>//\\ ''[[ht... **<nowiki>generic:</nowiki>** <nowiki>ar8216: fix unknown packet flooding for ar8229/ar8236</nowiki> //<col
OpenWrt v19.07.0 Changelog @releases:19.07
48 Hits, Last modified:
nowiki>ath79:</nowiki>** <nowiki>fix boardname of GL.iNet GL-AR300M</nowiki> //<color #ccc>(</color><color #282>+12</color><color #ccc>,</color><color #f0... ls:</nowiki>** <nowiki>ipq40xx: Configuration for GL.iNet GL-B1300</nowiki> //<color #ccc>(</color><color #282>+1</color><color #ccc>)</color>//\\ ''[[htt
OpenWrt v19.07.0-rc1 Changelog @releases:19.07
46 Hits, Last modified:
nowiki>ath79:</nowiki>** <nowiki>fix boardname of GL.iNet GL-AR300M</nowiki> //<color #ccc>(</color><color #282>+12</color><color #ccc>,</color><color #f0... ls:</nowiki>** <nowiki>ipq40xx: Configuration for GL.iNet GL-B1300</nowiki> //<color #ccc>(</color><color #282>+1</color><color #ccc>)</color>//\\ ''[[htt
HooToo HT-TM06 @toh:hootoo
8 Hits, Last modified:
without quotes, no file extension), so rename the Gl-inet firmware [[http://www.gl-inet.com/firmware/mt300n/clean/openwrt-gl-mt300n-clean-1.0.bin|here]] to "kernel". Wait several minu... hold power button down and let it shut down, the gl-inet has everything already. Turn on and it shou
TP-Link TL-WR703N @toh:tp-link
12 Hits, Last modified:
the [[toh:tp-link:tl-wr710n|TL-WR710N]] or [[toh:gl.inet:gl-ar150|GL-AR150]]. * It was the first device based on the [[docs:techref:hardware:soc:soc.qualcomm.a... ed via USB at 5V. The voltage regulator inside is unknown, but its input voltage should be at least between
OpenWrt v18.06.2 Changelog @releases:18.06
6 Hits, Last modified:
nowiki>hostapd:</nowiki>** <nowiki>make cli treat UNKNOWN COMMAND as failing</nowiki> //<color #ccc>(</colo... i>base-files:</nowiki>** <nowiki>make wifi report unknown command</nowiki> //<color #ccc>(</color><color #2... ]]'' **<nowiki>fstools:</nowiki>** <nowiki>filter unknown action in mount.hotplug script</nowiki> //<color ... dccc]]'' **<nowiki>ramips:</nowiki>** <nowiki>fix GL-MT300N-V2 SoC compatible</nowiki> //<color #ccc>(
OpenWrt v18.06.0 Changelog @releases:18.06
39 Hits, Last modified:
boot-envtools:</nowiki>** <nowiki>add support for GL.iNet GL-AR750</nowiki> //<color #ccc>(</color><color #282>+1</color><color #ccc>)</color>//\\ ''[[htt... owiki>ipq806x:</nowiki>** <nowiki>add support for GL.iNet GL-B1300</nowiki> //<color #ccc>(</color><color #282>+341</color><color #ccc>,</color><color #f0
OpenWrt v18.01.0-rc2 Changelog (WIP) @releases:18.06
38 Hits, Last modified:
boot-envtools:</nowiki>** <nowiki>add support for GL.iNet GL-AR750</nowiki> //<color #ccc>(</color><color #282>+1</color><color #ccc>)</color>//\\ ''[[htt... owiki>ipq806x:</nowiki>** <nowiki>add support for GL.iNet GL-B1300</nowiki> //<color #ccc>(</color><color #282>+341</color><color #ccc>,</color><color #f0
Linksys WRT54G/GL/GS GPIO @toh:linksys:wrt54g
3 Hits, Last modified:
====== Linksys WRT54G/GL/GS GPIO ====== | Please cf. the generic wikipage for [[docs:techref:hardware:... | (Output) | WLAN LED | Unknown | Not used | | GPIO 1 | O... | WHITE LED | DI (only v4.0+/WRT54GL) | | GPIO 3 | Output | ADM_EESK | ... O | | GPIO 5 | Output | ADM_EEDI | Unknown, robo_reset? | DI (only up to v3.1) | | GPIO
OpenWrt v18.01.0-rc1 Changelog (WIP) @releases:18.06
38 Hits, Last modified:
boot-envtools:</nowiki>** <nowiki>add support for GL.iNet GL-AR750</nowiki> //<color #ccc>(</color><color #282>+1</color><color #ccc>)</color>//\\ ''[[htt... owiki>ipq806x:</nowiki>** <nowiki>add support for GL.iNet GL-B1300</nowiki> //<color #ccc>(</color><color #282>+341</color><color #ccc>,</color><color #f0
LEDE v17.01.2 Changelog @releases:17.01
3 Hits, Last modified:
cpv6-ia:</nowiki>** <nowiki>create assignment for unknown IA in rebind messages</nowiki> //<color #ccc>(</c... mips:</nowiki>** <nowiki>remove DT pcie nodes for GL-MT300A/N</nowiki> //<color #ccc>(</color><color #... 5 === **Description:** <nowiki>kmod-crypto-sha256 unknown symbols</nowiki>\\ **Link:** [[https://bugs.lede-
LEDE v17.01.0 Changelog @releases:17.01
7 Hits, Last modified:
LEDE v17.01.0-rc1 Changelog @releases:17.01
6 Hits, Last modified:
  • Last modified: 2020/12/09 22:33
  • by hauke