Search

You can find the results of your search below.

Extroot configuration @docs:guide-user:additional-software
49 Hits, Last modified:
look like this: <code bash> tl-wr1043nd-v1: TP-LINK TL-WR1043N/ND v1 Packages: kmod-usb-core kmod-us... atever other storage device. In my case I have a TP-LINK TL-WR1043N/ND v1, so the profile name for my device is **tl-wr1043nd-v1** Now you need to write the command to start b... name for yours): <code bash> make image PROFILE=tl-wr1043nd-v1 PACKAGES="block-mount kmod-fs-ext4 kmod-usb-st
OpenSSL benchmarks @docs:guide-user:perf_and_log
272 Hits, Last modified:
| TP-Link TL-WR1043ND v2 ... | TP-LINK TL-WR841N/ND v8 ... | TP-LINK TL-WR841N/ND v8 ... | TP-LINK TL-WDR3600/4300/4310
Rygel DLNA Media Server @docs:guide-user:services:media_server
15 Hits, Last modified:
es are available in the openwrt patchwork and are linked from the [[https://github.com/aandyl/openwrt-packages/blob/rygel/... System requirements ===== My squashfs images for TL-WR1043ND containing rygel and dependencies are around 6 MB... ing rygel uses most of the 32 MB of memory in the WR1043ND. ===== Installing ===== There are several rygel... al packages may be needed to support your audio output. For the case of USB audio adapters, informatio
Wireless Repeater/Extender with WDS @docs:guide-user:network:wifi
28 Hits, Last modified:
ation ===== * Tested with OpenWrt 12.09 using a TP-Link TL-WR1043ND as the upstream wireless access point and a Rosew... repeater. * Tested with OpenWrt 15.05 using two TP-Link TL-WR1043ND. * Tested with OpenWrt 15.05.1 using a Netgear ... WDS. * Tested with OpenWrt 21.02.1 with both a TP-Link EAP235-Wall V1 and a Netgear R6800 as upstream wi... net cable (wired clients) should now be transparently connected into the main network over the wireless (WDS) link. ==== LuCI ==== Everything shown in the command
Wireless Access Point (aka "Dumb" Access Point) @docs:guide-user:network:wifi
14 Hits, Last modified:
a firewall. </WRAP> {{section>meta:infobox:howto_links#config-network-device&noheader&nofooter&noeditbu... \\ From a browser, navigate to LuCI by going to http://192.168.1.1. Login. Change the admin password i... address you assigned in the previous step (say, http://192.168.1.2).\\ Make sure your browser uses the... puter for 10 seconds and plug in again. The currently still active DHCP Server on your wirless AP will
Das U-Boot @docs:techref:bootloader
41 Hits, Last modified:
docs:techref:bootloader:uboot.config]]\\ -> [[toh/tp-link/tl-wr1043nd/flashlog]] ===== Documentation ===== * [[ftp:/... [[http://www.denx.de/wiki/DULG/Faq|FAQ]] * [[http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot|Blackfin]] * [[http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:porting|Porting U-Boot for a new Blackfin device]] Bl... tions ===== If somebody writes a patch for the bootloader implementation of a particular device, you will find links to this on the wiki-page for that device. Additi
Network configuration /etc/config/network @docs:guide-user:network
28 Hits, Last modified:
network UCI subsystem with default settings for a TL-WR1043ND: <code bash> config interface 'loopback' option... ngth .VLAN notation can be seen in the forum at https://forum.openwrt.org/t/network-interface-warning-... aging home network (HNCP) | ''hnet-full'' | | ''pptp'' | Connection via PPtP VPN | ? | | ''6in4'' | IPv6-in-IPv4 tunnel for use with Tunnel Brokers like H
Das U-Boot Environment @docs:techref:bootloader
67 Hits, Last modified:
An example on how to change this, is here: [[toh:tp-link:tl-wr1043nd#making_bootloader_partition_writable|TL-WR1043ND - Making bootloader partition writable]] You nee... les about making the partition read-write. [[toh:tp-link:tl-wr1043nd#making_bootloader_partition_writable|TL-WR1043ND - Making bootloader partition writable]] The information about being ''ro'' or ''rw'' can also be in
The OpenWrt Flash Layout @docs:techref
71 Hits, Last modified:
e:soc:soc.qualcomm|Qualcomm Atheros]]-based [[toh:tp-link:TL-WR1043ND]]. Somebody also provided a [[https://web.archive... n. JFFS2-Images omit the SquashFS partition. ^ TP-Link WR1043ND Flash Layout ^^^^^^ ^ Layer0 | ... | === Another Flash layout example === [[:toh:tp-link:archer_c6_v2#flash_layout|TP-Link Archer C6 V2 (EU/RU/JP)]] ==== Explanations ====... in ''/overlay'', a whiteout. A whiteout is a symlink to ''(overlay-whiteout)'' that mostly behaves like a file that doesn't exist. In newer
SNMPD @docs:guide-user:services:snmp
15 Hits, Last modified:
60|forum post]] ("64 bit counter support in SNMP (TL-WR1043ND)"), i.e. get the patch from [[https://dev.openwrt.org/ticket/8818|Ticket 8818]] ("En... slocation etc). In order to get your graphs correctly generated within Cacti, you need to change the w... less signal and noise with Cacti. Here is the [[http://nottheoilrig.com/openwrt/201212090/wireless.pat... patch for mini_snmpd]] and here is a patch to [[http://patchwork.openwrt.org/patch/3061/|add it to Ope
GPIO @docs:techref:hardware
28 Hits, Last modified:
ocs:guide-user:hardware:mmc_over_gpio]] * [[toh:tp-link:tl-wr1043nd#GPIOs|GPIOs of AR913x SoC]] * [[https://oldwiki.archive.openwrt.org/oldwiki/port.gpio|oldwiki GPIO]... ardware:pwm]] | kmod-pwm-gpio | removed since [[https://dev.openwrt.org/changeset/37490|r37490]] | pul... o-custom | ✔ | Custom GPIO rotary encoder | | [[https://github.com/wendlers/rcswitch-kmod|rcswitch-kmo
Ethernet Network Switch @docs:techref:hardware
59 Hits, Last modified:
66RB]], a 5-port Gigabit switch e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v1]] or [[toh/d-link/DIR-685]] * [[https://git.kernel.org/pub/scm/... et: 7Ports, 5x 1000Base-T-PHYs e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v2]] ([[http://wikidevi.com/files/Atheros/specsheets/AR8327_AR8327N.pdf|Atheros AR8327N-BL1A]]) * [[http://www.qca.qualcomm.com/technology/technology.php?
  • Last modified: 2024/01/03 12:05
  • by aparcar