Search

You can find the results of your search below.

无线接入点 / 哑接入点 @zh:docs:guide-user:network:wifi
23 Hits, Last modified:
appropriate </code> === For devices with switch and dedicated WAN, e.g. WNDR3700, WR1043ND v1, WR741ND v2.4 === On devices with a separate WAN interface, bridge the LAN VLAN together with th... option ifname 'eth0.1 eth1' # Bridges vlan 1 and wan option proto 'dhcp' # Chan... e as appropriate </code> Switch configuration on WR1043ND (barrier breaker): <code> config switch_vlan
网络基础知识 /etc/config/network @zh:docs:guide-user:base-system
41 Hits, Last modified:
更改后的接口将自动重启生效。 重启路由器不是必须的,但这也是强制配置重载的另一种方式。 这是一个TL-WR1043ND的默认network uci子系统配置示例 <code bash># uci show netwo... lse ''0'' | Specifies whether ip address, route, and optionally gateway are assigned to the interface regardless of the link being active ('1') or only after the link has bec... set to '1', carrier sense events do not invoke hotplug handlers | | ''disabled'' | boolean | no | ''0'' | ena... 'vlan'' | integer | 是 | (none) | The vlan "table index" to configure | May be limited to 127 or another number. See the output of ''swconfig dev <dev> help'' for limit. Sets
使用Atheros和MAC80211 WDS实现无线网桥(无线中继) @zh:docs:guide-user:network:wifi
19 Hits, Last modified:
]描述了其实现原理。 ===== 配置 ===== * 在安装了OpenWrt 12.09的TP-LINK TL-WR1043ND作为本地无线接入点,Rosewill RNX-N300RT作为远程无线桥接客户端设备的情况下验证通过。 * 在两部安装了OpenWrt 15.05的TP-LINK TL-WR1043ND上验证通过。 * 在安装了OpenWrt 15.05的Netgear WNDR3700v4作为接入点,Nexx WT3020作为桥接客户端的情况下验证通过。 在使用[[docs:guide-user:base-s... 无线接入点 === 设置无线接入点的无线模式为:"Access Point (WDS)" ([[http://i.imgur.com/pzj2KFY.png|screenshot]]) === 远端无线
  • Last modified: 2024/01/03 12:05
  • by aparcar