Search

You can find the results of your search below.

OpenSSL benchmarks @docs:guide-user:perf_and_log
358 Hits, Last modified:
| r11063 | Qualcomm Atheros QCA9558 ver 1 rev 0 | TP-Link TL-WR1043ND v2 | MIPS 74Kc V5.0 | 358.80 | 1.1.1g | 64406420 | 4... | r11319 | Qualcomm Atheros QCA956X ver 1 rev 0 | TP-Link Archer C6 v2 | MIPS 74Kc V5.0 | 385.84 | 1.1.1d | 69201420 | 4... | 26.1 | 27.9 | | r7188 | Atheros AR9341 rev 1 | TP-LINK TL-WR841N/ND v8 | MIPS 74Kc V4.12 @ 700.000MHz | 348.97 |... | 34.3 | 36.0 | | r7188 | Atheros AR9341 rev 1 | TP-LINK TL-WR841N/ND v8 | MIPS 74Kc V4.12 @ 650.000MHz | 324.40 |
Debrick ath79 using JTAG @docs:guide-user:hardware
74 Hits, Last modified:
*, **AR93xx**, **QCA95xx**. Unlike the [[:ru:toh:tp-link:tl-mr3420:debrick.using.jtag|method]] with initializ... L-WR1043ND ^ | {{:media:dlink:dir-615:e4-photos:d-link.dir-615e4-jtag.jpg?400}} | {{:media:tplink/tl-wr1043/tl-wr1043nd_serial.jpg?400}} | Using **nSRST** (**RST**) pin... tor (#63) is **art** partition (for 4MByte flash and TP-LINK platform).// \\ \\ \\ <code>> dump_image uboot.bi... name of flash on package), in datasheet you can find necessary registers for the driver. Or copy it from [[http://fossies.org/linux/qemu/hw/block/m25p80.c|other
Ethernet Network Switch @docs:techref:hardware
71 Hits, Last modified:
66RB]], a 5-port Gigabit switch e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v1]] or [[toh/d-link/DIR-685]] * [[https://git.kernel.org/pub/scm/... et: 7Ports, 5x 1000Base-T-PHYs e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v2]] ([[http://wikidevi.com/files/Atheros/specsheets/AR8327_AR8327N.pdf|Atheros AR8327N-BL1A]]) * [[http://www.qca.qualcomm.com/technology/technology.php?
Extroot configuration @docs:guide-user:additional-software
67 Hits, Last modified:
look like this: <code bash> tl-wr1043nd-v1: TP-LINK TL-WR1043N/ND v1 Packages: kmod-usb-core kmod-usb2 kmod-led... atever other storage device. In my case I have a TP-LINK TL-WR1043N/ND v1, so the profile name for my device is **tl-wr1043nd-v1** Now you need to write the command t... name for yours): <code bash> make image PROFILE=tl-wr1043nd-v1 PACKAGES="block-mount kmod-fs-ext4 kmod-usb-st... ve to format the USB drive with ext4 filesystem, and to do that you will need to use a Linux LiveCD or [[https://gparted.org/livecd.php|gparted]] disk. Sadly t
Table of capabilities for wireless chipsets @docs:guide-user:network:wifi
66 Hits, Last modified:
| | 150 | 1x1:1 | 0 | 0 | 1 | 17 | 17 | - | [[toh:tp-link:tl-wr740n|740/741 v1/v2/v3]], [[toh:tp-link:tl-mr3220|3220v1]], 743v1, [[:toh:views:toh_performa... 150 | 2x1:1 | 0 | 0 | 1 | 16-18 | 18 | - | [[toh:tp-link:tl-mr3020|3020]], [[toh:tp-link:tl-mr3220|3220v2]], 740/741v4, [[toh:tp-link:tl-wr743nd|743v2]], [[:toh:views:toh_performance_details?dataflt%5BWLAN+Hardware*%7E%5D=AR9331|More]] | | AR9287 | ... | 2x2:2 | 0 | 1 | 1 | 18 | 21 | - | 841v7, [[toh:tp-link:tl-wr842nd|842v1]], [[:toh:views:toh_performance_details?dat
Turning USB power on and off @docs:guide-user:hardware
53 Hits, Last modified:
^ Pin number(s) ^ | [[toh:tp-link:tl-wr703n|TP-Link TL-WR703N]] | 8 | | [[toh:tp-link:tl-wr842nd|TP-Link TL-WR842ND]] | 6 (v1), 4 (v2) | | [[toh:tp-link:tl-wdr3600_v1|TP-Link TL-WDR3600]] | 21, 22 | | [[toh:tp-link:tl-wdr4300_v1|TP-Link TL-WDR4300]] | 21, 22
Network File System (NFS) @docs:guide-user:services:nas
32 Hits, Last modified:
writing: 15,3MB/s and reading: 17,4MB/s I have TL-WR1043ND from TP-Link by default it has a throughput of 4,5mb/sec, after tweaking the block size, and the mount options it delivers 9,5 mb/sec. Cheers!... rack #---------- don't track nfs $IPT -t raw -A OUTPUT -o $IF_LAN -d $NET_LAN -p tcp --sport 32777:327... rack #---------- don't track nfs $IPT -t raw -A OUTPUT -o $IF_LAN -d $NET_LAN -p udp --sport 32777:327
Back to original firmware @docs:guide-user:installation
32 Hits, Last modified:
device "linux" instead of "firmware". (Tested on TP-Link TL-WR841ND V7): > <code>mtd -r write /tmp/original_firmware.... sometimes you need to be careful, see e.g. [[toh/tp-link/tl-wr1043nd#Back to original firmware]]. If you get a error ... \\ Note: It is no more necessary to cut off the vendor-provided firmware file on [[toh:linksys:wrt_ac_series|Linksys WRT-ACS series]]. If you only have a Linksys ''.bin'' firmware file, this is not a problem, simply
Performance @docs:techref:hardware
30 Hits, Last modified:
ser:perf_and_log:performance]] for HowTos! ===== tp-link Wr1043ND ===== ==== Ethernet Performance ==== The test wa... e impact of other factors as much as possible. My TP-Link WR1043ND runs OpenWrt Backfire 10.03.1-RC4. Kernel version... a/NTFS Performance === These figures come from a TP-Link WR1043ND v1.8 running backfire 10.03.1-RC4 and samba 3.0.4. The HDD is an NTFS formatted 7200 RP... when plugged into a computer. A large (several hundred MiB) file is copied from and to the router, th
  • Last modified: 2021/04/26 21:14
  • by hauke