Search

You can find the results of your search below.

OpenSSL benchmarks @docs:guide-user:perf_and_log
329 Hits, Last modified:
| TP-Link Archer C2600 ... | TP-Link Archer C2600 ... | [[toh:tp-link:archer_c6u_v1_eu|TP-Link Archer C6U v1]] | MIPS 1004Kc V2.... | TP-Link TL-WR1043ND v2
ISP Configurations @docs:guide-user:network:wan
106 Hits, Last modified:
g is an example configuration working on an [[toh:tp-link:archer_c7|TP-Link Archer C7]]: <code> config interface 'wan' option ... ir. === ADSL2(+) === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremeno 1" plan via ADSL2+... /code> === VDSL2 === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremeno 2" plan over VDSL2... eds to add the VLAN tag in this case. Example for Archer C7 V2 below. Old platform: <code> config interface 'w
Lantiq SoCs @docs:techref:hardware:soc
81 Hits, Last modified:
or2760|Draytek Vigor 2760(Vn)/(Delight)]]\\ [[toh/tp-link/vr200v|TP-Link Archer VR200v]]\\ [[toh:zyxel:p-2812hnu-f1|ZyXEL P-2812H... high performance WLAN and GbitE LAN/WAN \\ [[toh/tp-link/archer_d2_ac750|TP-Link Archer D2 AC750]] ... Infineon called Amazon "AR8" in at least one [[http://www.infineon.com/dgdl/IFX_CPE_Brochure_final.pdf?folderId=db3a304312dc768d0112e132874e0280&fileId=db3a30431add1d95011ae88... again before Barrier Breaker. There has been [[https://forum.openwrt.org/viewtopic.php?id=39319 |some
Build system usage @docs:guide-developer:toolchain
45 Hits, Last modified:
]: For example if you are flashing for the [[toh:tp-link:archer_c7]] you can locate on its wiki page the factory fir... rgets/ath79/generic/openwrt-21.02.1-ath79-generic-tplink_archer-c7-v2-squashfs-factory.bin 'ath79' tells you the Target, 'generic' tells you the Subtarget while 'archer-c7-v2' tells you the Target profile for the very specif... ms. E.g. to select and save the target for [[toh:tp-link:tl-wr841n|TL-WR841N v11]] Wi-Fi router: - Targe
Switch documentation @docs:guide-user:network:vlan
9 Hits, Last modified:
so look at the Wiki for your specific device. The TP-Link Archer C7 has eth0 = WAN, and eth1 = LAN (the 4 switch port... ur router. Every router is different. The popular TP-Link WDR4300 only has eth0. ===== UCI config, swconfi... 'swconfig dev <switch_interface_name> show | grep link'' or see [[docs:techref:swconfig]] ==== Assumpti... == Examples ==== ==== Example on the asus wl500gp v2 , openwrt 10.03, every physical port ==== <code b
B.A.T.M.A.N. / batman-adv @docs:guide-user:network:wifi:mesh
77 Hits, Last modified:
nwrt-18.06'' and ''master'' in September, 2018 on Archer C7v2 units running the non-CT firmware (see note above... sic'' as it conflicts with ''wpad-mesh-*''. [[https://github.com/openwrt/openwrt/commit/49cc712b44c76e99bfb716c06700817692975e05|As of September 2019]... Once applied, ''mesh0'' should be seen in the output of ''ip link''. <code> 8: mesh0: <BROADCAST,MULTICAST,UP,LOW... figuration done, you should see ''bat0'' in the output of ''ip link''. The output of ''batctl o'' and/or ''batctl n''
  • Last modified: 2024/01/03 12:05
  • by aparcar