Search

You can find the results of your search below.

Extroot configuration @docs:guide-user:additional-software
12 Hits, Last modified:
look like this: <code bash> tl-wr1043nd-v1: TP-LINK TL-WR1043N/ND v1 Packages: kmod-usb-core kmod-us... atever other storage device. In my case I have a TP-LINK TL-WR1043N/ND v1, so the profile name for my device is **tl-wr1043nd-v1** Now you need to write the command to start b... name for yours): <code bash> make image PROFILE=tl-wr1043nd-v1 PACKAGES="block-mount kmod-fs-ext4 kmod-usb-st
OpenSSL benchmarks @docs:guide-user:perf_and_log
232 Hits, Last modified:
| TP-Link TL-WR1043ND v2 ... | TP-LINK TL-WR841N/ND v8 ... | TP-LINK TL-WR841N/ND v8 ... | TP-LINK TL-WDR3600/4300/4310
Rygel DLNA Media Server @docs:guide-user:services:media_server
5 Hits, Last modified:
System requirements ===== My squashfs images for TL-WR1043ND containing rygel and dependencies are around 6 MB... ing rygel uses most of the 32 MB of memory in the WR1043ND. ===== Installing ===== There are several rygel... lications * Try a different media player ===== Link dump ===== * https://wiki.archlinux.org/index.p
Wireless Repeater/Extender with WDS @docs:guide-user:network:wifi
23 Hits, Last modified:
ation ===== * Tested with OpenWrt 12.09 using a TP-Link TL-WR1043ND as the upstream wireless access point and a Rosew... repeater. * Tested with OpenWrt 15.05 using two TP-Link TL-WR1043ND. * Tested with OpenWrt 15.05.1 using a Netgear ... WDS. * Tested with OpenWrt 21.02.1 with both a TP-Link EAP235-Wall V1 and a Netgear R6800 as upstream wireless access point, and D-Link DIR-878 A1 as the repeater (all MediaTek 802.11ac
Das U-Boot @docs:techref:bootloader
21 Hits, Last modified:
docs:techref:bootloader:uboot.config]]\\ -> [[toh/tp-link/tl-wr1043nd/flashlog]] ===== Documentation ===== * [[ftp:/... one of the first versions of this project on [[http://www.tech-blog.pl/2013/03/29/zmodyfikowany-u-boot-dla-routerow-tp-link-z-atheros-ar9331-z-trybem-aktualizacji-oprogramow
Network configuration /etc/config/network @docs:guide-user:network
19 Hits, Last modified:
network UCI subsystem with default settings for a TL-WR1043ND: <code bash> config interface 'loopback' option... aging home network (HNCP) | ''hnet-full'' | | ''pptp'' | Connection via PPtP VPN | ? | | ''6in4'' | IPv6-in-IPv4 tunnel for use with Tunnel Brokers like H... 'dslite'' | Dual-Stack Lite | ''ds-lite'' | | ''l2tp'' | PPP over L2TP Pseudowire Tunnel | ''xl2tpd''
Das U-Boot Environment @docs:techref:bootloader
41 Hits, Last modified:
An example on how to change this, is here: [[toh:tp-link:tl-wr1043nd#making_bootloader_partition_writable|TL-WR1043ND - Making bootloader partition writable]]... les about making the partition read-write. [[toh:tp-link:tl-wr1043nd#making_bootloader_partition_writable|TL-WR1043ND - Making bootloader partition writable]] The information about being ''ro'' or ''rw'' can also be
The OpenWrt Flash Layout @docs:techref
26 Hits, Last modified:
e:soc:soc.qualcomm|Qualcomm Atheros]]-based [[toh:tp-link:TL-WR1043ND]]. Somebody also provided a [[https://web.archive... n. JFFS2-Images omit the SquashFS partition. ^ TP-Link WR1043ND Flash Layout ^^^^^^ ^ Layer0 | ... | === Another Flash layout example === [[:toh:tp-link:archer_c6_v2#flash_layout|TP-Link Archer C6 V2 (EU/RU/JP)]] ==== Explanations ====... in ''/overlay'', a whiteout. A whiteout is a symlink to ''(overlay-whiteout)'' that mostly behaves lik
SNMPD @docs:guide-user:services:snmp
9 Hits, Last modified:
60|forum post]] ("64 bit counter support in SNMP (TL-WR1043ND)"), i.e. get the patch from [[https://dev.openwrt... less signal and noise with Cacti. Here is the [[http://nottheoilrig.com/openwrt/201212090/wireless.pat... patch for mini_snmpd]] and here is a patch to [[http://patchwork.openwrt.org/patch/3061/|add it to OpenWrt]]. Here is a blog post about [[http://jdbates.blogspot.com/2012/12/heres-patch-for-mi
GPIO @docs:techref:hardware
10 Hits, Last modified:
ocs:guide-user:hardware:mmc_over_gpio]] * [[toh:tp-link:tl-wr1043nd#GPIOs|GPIOs of AR913x SoC]] * [[https://oldwiki... ia:doc:hardware:bcm6328-lan-led_pinmux-bits.png?nolink|}}\\ These enabled bits are enabling every LAN LE... ilities ==== To control GPIOs you can use **gpioctl-sysfs**. Also with this simple script you can con... ript and a multimeter to find out. ==== script "blink" ==== <code bash> #!/bin/sh GPIOBASE=`cat /sys/
Ethernet Network Switch @docs:techref:hardware
26 Hits, Last modified:
66RB]], a 5-port Gigabit switch e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v1]] or [[toh/d-link/DIR-685]] * [[https://git.kernel.org/pub/scm/... et: 7Ports, 5x 1000Base-T-PHYs e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v2]] ([[http://wikidevi.com/files/Atheros/specsheets/AR8327_AR8327N.pdf|Atheros AR8327N-BL1A]]) * [[http://www.qca.qualcomm.com/technology/technology.php?
Generic NOR backup @docs:guide-user:installation
7 Hits, Last modified:
to compile you own kernel after doing some [[toh:tp-link:tl-wr1043nd#making_bootloader_partition_writable|minor modifi
Upgrading OpenWrt firmware using CLI @docs:guide-user:installation
16 Hits, Last modified:
neath the Image Files section: - <code>DOWNLOAD_LINK="http://URLOFFIRMWAREBIN"; SHA256SUMS="http://URLOFSHA256"</code> - Download and check the ... ) * you can use **scp**: ''scp openwrt-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin root@192.168.1.1:/tmp'... ''ssh root@192.168.1.1 "cat > /tmp/openwrt-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin" < openwrt-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin'' (Also ensure you hav... inux PC nc -q 0 192.168.1.1 1234 < openwrt-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin # OpenWrt nc -l -p 12
Upgrading OpenWrt firmware using LuCI and CLI @docs:guide-user:installation
11 Hits, Last modified:
downloading the OpenWrt 15.05 upgrade image for a TP-LINK TL-WR1043ND ver. 1.x router cd /tmp wget http://downloads.ope... 15.05/ar71xx/generic/openwrt-15.05-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin # check the integrity... # sysupgrade -v /tmp/openwrt-15.05-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin </code> NOTE: see ext
Turning USB power on and off @docs:guide-user:hardware
42 Hits, Last modified:
^ Pin number(s) ^ | [[toh:tp-link:tl-wr703n|TP-Link TL-WR703N]] | 8 | | [[toh:tp-link:tl-wr842nd|TP-Link TL-WR842ND]] | 6 (v1), 4 (v2) | | [[toh:tp-link:tl-wdr3600_v1|TP-Link TL-WDR3600]] | 21, 22 | | [[toh:tp-link:tl-wdr4300_v1|TP-Link TL-WDR4300]] | 21, 22
ubus system @docs:guide-developer:ubus
6 Hits, Last modified:
Attach functions to a push button @docs:guide-user:hardware
22 Hits, Last modified:
ownCloud or NextCloud @docs:guide-user:services:nas
34 Hits, Last modified:
USB Benchmarks @docs:guide-user:perf_and_log
82 Hits, Last modified:
LED Configuration @docs:guide-user:base-system
41 Hits, Last modified:
Network File System (NFS) @docs:guide-user:services:nas
8 Hits, Last modified:
Snippets @docs:guide-user:advanced
8 Hits, Last modified:
Debrick ath79 using JTAG @docs:guide-user:hardware
22 Hits, Last modified:
Back to original firmware @docs:guide-user:installation
11 Hits, Last modified:
  • Last modified: 2024/01/03 12:05
  • by aparcar