Search

You can find the results of your search below.

Das U-Boot Environment @docs:techref:bootloader
41 Hits, Last modified:
An example on how to change this, is here: [[toh:tp-link:tl-wr1043nd#making_bootloader_partition_writable|TL-WR1043ND - Making bootloader partition writable]]... les about making the partition read-write. [[toh:tp-link:tl-wr1043nd#making_bootloader_partition_writable|TL-WR1043ND - Making bootloader partition writable]] The information about being ''ro'' or ''rw'' can also be
The OpenWrt Flash Layout
26 Hits, Last modified:
e:soc:soc.qualcomm|Qualcomm Atheros]]-based [[toh:tp-link:TL-WR1043ND]]. Somebody also provided a [[https://web.archive... n. JFFS2-Images omit the SquashFS partition. ^ TP-Link WR1043ND Flash Layout ^^^^^^ ^ Layer0 | ... | === Another Flash layout example === [[:toh:tp-link:archer_c6_v2#flash_layout|TP-Link Archer C6 V2 (EU/RU/JP)]] ==== Explanations ====... in ''/overlay'', a whiteout. A whiteout is a symlink to ''(overlay-whiteout)'' that mostly behaves lik
Ethernet Network Switch @docs:techref:hardware
26 Hits, Last modified:
66RB]], a 5-port Gigabit switch e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v1]] or [[toh/d-link/DIR-685]] * [[https://git.kernel.org/pub/scm/... et: 7Ports, 5x 1000Base-T-PHYs e.g. in the [[toh/tp-link/tl-wr1043nd|WR1043ND v2]] ([[http://wikidevi.com/files/Atheros/specsheets/AR8327_AR8327N.pdf|Atheros AR8327N-BL1A]]) * [[http://www.qca.qualcomm.com/technology/technology.php?
Das U-Boot @docs:techref:bootloader
21 Hits, Last modified:
docs:techref:bootloader:uboot.config]]\\ -> [[toh/tp-link/tl-wr1043nd/flashlog]] ===== Documentation ===== * [[ftp:/... one of the first versions of this project on [[http://www.tech-blog.pl/2013/03/29/zmodyfikowany-u-boot-dla-routerow-tp-link-z-atheros-ar9331-z-trybem-aktualizacji-oprogramow
GPIO @docs:techref:hardware
10 Hits, Last modified:
ocs:guide-user:hardware:mmc_over_gpio]] * [[toh:tp-link:tl-wr1043nd#GPIOs|GPIOs of AR913x SoC]] * [[https://oldwiki... ia:doc:hardware:bcm6328-lan-led_pinmux-bits.png?nolink|}}\\ These enabled bits are enabling every LAN LE... ilities ==== To control GPIOs you can use **gpioctl-sysfs**. Also with this simple script you can con... ript and a multimeter to find out. ==== script "blink" ==== <code bash> #!/bin/sh GPIOBASE=`cat /sys/
  • Last modified: 2024/01/03 12:05
  • by aparcar