Search

Fulltext results:

ISP Configurations @docs:guide-user:network:wan

47 Hits, Last modified: 20 hours ago

g is an example configuration working on an [[toh:tp-link:archer_c7|TP-Link Archer C7]]: <code> config interface 'wan' option ... ir. === ADSL2(+) === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremeno 1" plan via ADSL2+... /code> === VDSL2 === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremeno 2" plan over VDSL2... eds to add the VLAN tag in this case. Example for Archer C7 V2 below. Old platform: <code> config interface 'w

OpenSSL benchmarks @docs:guide-user:perf_and_log

290 Hits, Last modified: 6 days ago

| TP-Link Archer C2600 ... | TP-Link Archer C2600 ... | [[toh:tp-link:archer_c6u_v1_eu|TP-Link Archer C6U v1]] | MIPS 1004Kc V2.... | TP-Link TL-WR1043ND v2

Build system usage @docs:guide-developer:toolchain

19 Hits, Last modified: 11 days ago

]: For example if you are flashing for the [[toh:tp-link:archer_c7]] you can locate on its wiki page the factory fir... ets/ath79/generic/openwrt-21.02.1-ath79-generic-tplink_archer-c7-v2-squashfs-factory.bin 'ath79' tells you the Target, 'generic' tells you the Subtarget while 'archer-c7-v2' tells you the Target profile for the very specif... ms. E.g. to select and save the target for [[toh:tp-link:tl-wr841n|TL-WR841N v11]] Wi-Fi router: - Targe

Switch documentation @docs:guide-user:network:vlan

8 Hits, Last modified: 7 months ago

so look at the Wiki for your specific device. The TP-Link Archer C7 has eth0 = WAN, and eth1 = LAN (the 4 switch port... ur router. Every router is different. The popular TP-Link WDR4300 only has eth0. ===== UCI config, swconfi... 'swconfig dev <switch_interface_name> show | grep link'' or see [[docs:techref:swconfig]] ==== Assumpti... == Examples ==== ==== Example on the asus wl500gp v2 , openwrt 10.03, every physical port ==== <code b

B.A.T.M.A.N. / batman-adv @docs:guide-user:network:wifi:mesh

42 Hits, Last modified: 2 years ago

nwrt-18.06'' and ''master'' in September, 2018 on Archer C7v2 units running the non-CT firmware (see note above... lower latency, and/or reliability of an Ethernet link will make up for this effect. ===== Installation... [[https://github.com/openwrt/openwrt/commit/49cc712b44c76e99bfb716c06700817692975e05|As of September 2019]], ''wpad-openssl'' or ''wpad-wolfssl'' are /