Search

You can find the results of your search below.

Arcadyan WE420223-99 @inbox:toh:arcadyan:astoria
987 Hits, Last modified:
lash chip ==== === Connecting the flash chip to a Raspberry Pi === A Raspberry Pi can be used to program the flash chip in-circuit (thanks FPSUsername for discovering). On the Raspberry Pi, install ''xxd libubootenv-tool mtd-utils'' using ''apt'' on Raspberry Pi OS. To access the flash chip we have a specially ... 23''. Connect the chip directly to the [[https://pinout.xyz/pinout/spi|Raspberry Pi's SPI pins]]. Use the following connections:
Creator Ci40 (Marduk) 02KZ/5+ @toh:creator
406 Hits, Last modified:
nkins.creatordev.io/job/CreatorDev/job/u-boot/job/2015.10/9/artifact/u-boot-pistachio_marduk-2015.10-v1.0.4.img|uboot-pistachio]] and copy into USB stick. - Please re... | ^ System-On-Chip | Creator cXT200 (Pistachio) SoC | ^ CPU/Speed | 550 ... faces for external Click boards | ^ Raspberry Pi Interface | Raspberry Pi B+ interface (not simultaneous with Click boards)... 0.086919] ATU Clock Module Loaded [ 0.099164] m25p80 spi1.0: s25fl016k (2048 Kbytes) [ 0.104653] 4 cmdl
BT Home Hub 2.0 Type A @toh:bt
754 Hits, Last modified:
m of JTAG hardware** (although this can be just a Raspberry Pi). According to a couple of [[http://openwrt.ebil... d 60%> <del>[[https://mega.nz/#!NJg1zBbY!2ncHJ6w7f2mBLftqxtpLHNUA8tWoY5yJawRuPFGJPu0|CFE-BTHH2A-anyflash-oxplot-tjtag-pi.bin]]</del>\\ <color grey>md5sum=7f7dcd973ada548d... Ethernet | Broadcom {{:media:datasheets:bcm5325_pinout.png?linkonly|BCM5325}} supporting 16 VLANs vi... front of the board at the bottom, the unpopulated 2mm pitch serial port header is located near the top of
OpenSSL benchmarks @docs:guide-user:perf_and_log
3789 Hits, Last modified:
| Raspberry PI 2 Model B ... | Raspberry PI 2 Model B ... 48 bits 0.016559s 0.019379s 60.4 51.6 </code> * raspberry pi 3 model B, raspian lite 8.1 , openssl OpenSSL 1.0.1k 8 Jan 2015 <code> The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes md5 6491.83k 15158.
SoC (System on a Chip) @docs:techref:hardware
54 Hits, Last modified:
href:hardware:soc:soc.broadcom.bcm33xx]] === brcm2708 (= Raspberry Pi) === * OpenWrt support is WIP * no, there are... g/toh/xavi/xavi_7968]] * -> [[toh:linksys:wag54g2]] ==== Marvell ==== === orion === Marvell MV88F**5**18x/MV88F528x * ->[[docs:techref:hardware:soc:soc.marvell]] === kirkwood === Marvell MV88F**6**1xx/MV88F62xx * ->[[docs:techref:hardware:soc:soc.marvell]]
SD card @docs:guide-user:installation:installation_methods
19 Hits, Last modified:
d. Common devices that use this procedure include Raspberry Pi and NanoPi. ==== Graphical Utilities ==== Install [[https... * compressed * newer images include a hidden f2fs filesystem, which is optimized for flash memory... appropriately - e.g. /dev/sda PARTITION="$DEVICE"2 FS_SIZE="$(sudo unsquashfs -s "$PARTITION" | grep... o resize it you'll need the offset of the hidden f2fs or ext4 filesystem (depending on the size of yo
Devicepage with forum link + search 2 @playground
1026 Hits, Last modified:
code> Read the previous flash contents <code> pi@raspberrypi:~/flashrom $ ./flashrom -p linux_spi:dev=/dev/spidev0.0 -c MX25L6405D -r part_original.bin flashrom v1.1 on Linu... 05_1476936302791w.zip’ saved [33320162/33320162] pi@raspberrypi:~/flashrom $ mv Archer_MR200\(EU\)_V1_160905_1476936302791w.zip original_fw.... 905/How to upgrade TP-LINK Wireless AC Router.pdf pi@raspberrypi:~/flashrom $ mv Archer\ MR200\(EU\)_V1_160905/Archer\ MR200v1_0.9.1_1.1_up_bo... configs.bin </code> Flash the new file <code> pi@raspberrypi:~/flashrom $ ./flashrom -p linux_spi:dev=/dev/spidev0.0 -c MX25L6405D -w new_bootloader_firmware_configs.bin fla
brcm2708 @docs:techref:targets
13 Hits, Last modified:
====== brcm2708 ====== * Broadcom 2708/2835 (used in the Raspberry Pi) This target was renamed to [[docs:techref:targets:bcm27xx|b... pported using the kernel from ​https://github.com/raspberrypi ===== Other info ===== * [[https://git.lede... org/?p=source.git&a=search&h=HEAD&st=commit&s=brcm2708:|Latest git commits for this target]] * Link... -- col : subtarget filter : Target=brcm2708 summarize : 1 rownumbers : 1 ---- ++++ ++++F
bcm27xx @docs:techref:targets
40 Hits, Last modified:
to bcm27xx after the 19.07 release. * Broadcom 2708/2835 (used in the Raspberry Pi) ===== Status ===== Fully supported using the kernel patches from ​https://github.com/raspberrypi ===== Other info ===== * [[https://git.lede... .org/?p=source.git&a=search&h=HEAD&st=commit&s=bcm27xx:|Latest git commits for this target]] * [[do... nal-software:imagebuilder|Image builders]] for bcm27xx * [[https://downloads.openwrt.org/snapshot
VONETS VAR11N-300 @toh:vonets
315 Hits, Last modified:
directly with SPI and a SOIC 8 clip. - Using a RaspberryPi, Rasbian, a pomona 8-pin clip, and https://www.rototron.info/recover-bricked-bios-using-flashrom-on-a-raspberry-pi/ as a guide for both physical connection as well as walk-through - run `flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=2000 -r vonets-var11n-300.bin` to get the existing ... join them together - lastly `flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=2000 -w fulltestbuild.rom` to flash it back to the
Pine64 PINE A64+ @toh:pine64
383 Hits, Last modified:
port, expansion port for optional Bluetooth 4.0/802.11 b/g/n expansion board, Raspberry Pi compatible 40-pin GPIO header, 34 pin Euler Bus and 10 pin Expansion Bus. PINE A64 has 512Mb Ram and 10/100 ethernet while PINE A64+ provides 1024/2048Mb Ram and gigabit ethernet. OpenWrt build target [[docs:techre... uart0.jpg}} ^ Serial connection parameters\\ for Pine64 PINE A64 | 3.3V 115200, 8N1 | ^ UART0 | EXP:\\ TXD 7, RXD 8, GND 9 |
TP-Link TL-WPA8630P v2 @toh:tp-link
1118 Hits, Last modified:
underlying cause, see [[https://lists.openwrt.org/pipermail/openwrt-devel/2019-December/026593.html|this discussion]]). To preserve settings... 0000| | default-mac | 0x7e0000| 0x00020| | pin | 0x7e0100| 0x00020| | device-id | 0x7e0200| 0x00030| | pro... 2000| | default-mac | 0x630000| 0x00020| | pin | 0x630100| 0x00020| | device-id | 0x630200| 0x00030| | pro... 0000| | default-mac | 0x7e0000| 0x00020| | pin | 0x7e0100| 0x00020| | device-id | 0x7e0200| 0x00030| | rad
TP-Link Archer MR200 v1 @toh:tp-link
106 Hits, Last modified:
ery is possible by using a CH340a Programmer or a Raspberry Pi, SOIC8 connector/adapter is required, refer to **... rom the board. SOIC8 Adapter is required. **For Raspberry Pi** | Flash Pin | Meaning | Raspberry Pi | | 1 | CS | 24 | | 2 | DO | 21 ... ions between the flash chip and the programmer or Raspberry Pi, refer to **Connecting to Flash Chip** for more i
Arcadyan AR7516 (aka EE Brightbox 1) @toh:arcadyan
604 Hits, Last modified:
ugh the side grilles. ==== Buttons ==== Reset (GPIO 23, active low) and WPS (GPIO 24, active low) are recognised and can be mapped to... sual OpenWrt button system]]. The unpopulated SW42 is also connected to GPIO 24, and seems to be an alternative position for ... | wifi activity | eth1 | eth2 | eth3 | eth4 | ^ GPIO | 6 | 1 | ? | 7 | 25 | 26 | 27 | 28 | ^ Active | low | high | ? ... d:inet/'' for now | | **2** | parallel flash pin 41 (SPI side, above the '2' of label C218)
MikroTik RB750Gr3 (non-native support, obsoleted with OpenWrt-19.07) @toh:mikrotik
760 Hits, Last modified:
EDE image) - Power OFF the router - Connect SPI programmer to the Winbond W25Q128 SPI flash chip - Power up the SPI chip directl... flasher|arduino]] or a [[https://www.flashrom.org/RaspberryPi|Raspberry Pi]]. == Constructing the image == It's possible ... he exact procedure for flashing the image to the W25Q128FV flash chip depends on your flasher. In this example, I used a bus pirate with flashrom. The connections and commands f... | ==== Flash Layout ==== ^ Layer0 | m25p80 spi32766.0: w25q128 (16384 KiB) |||||| ^ Layer1 | *
Pine64 RockPro64 v2.1 @toh:pine64
442 Hits, Last modified:
Meraki MR18 @toh:meraki
331 Hits, Last modified:
Aruba AP-105 @toh:aruba
365 Hits, Last modified:
TP-Link TD-W8970 v1 @toh:tp-link
1503 Hits, Last modified:
Huawei EchoLife HG553 @toh:huawei
155 Hits, Last modified:
TP-Link TL-WR741ND @toh:tp-link
467 Hits, Last modified:
Raspberry Pi @toh:raspberry_pi_foundation
1689 Hits, Last modified:
OpenWrt 23.05.0 Changelog @releases:23.05
21836 Hits, Last modified:
CrowdSec @docs:guide-user:services
527 Hits, Last modified:
stintel @developers
35 Hits, Last modified:
AdGuard Home @es:docs:guide-user:services:dns
74 Hits, Last modified:
Irqbalance @docs:guide-user:services
124 Hits, Last modified:
DDNS Client DuckDNS @docs:guide-user:services:ddns
4 Hits, Last modified:
OpenWrt SystemReady @docs:guide-user
24 Hits, Last modified:
OpenWrt 23.05.0-rc3 Changelog @releases:23.05
1081 Hits, Last modified:
OpenWrt 22.03.0-rc4 Changelog @releases:22.03
1090 Hits, Last modified:
OpenWrt v23.05.0-rc1 Changelog @releases:23.05
19262 Hits, Last modified:
  • Last modified: 2024/01/03 12:05
  • by aparcar