Search

You can find the results of your search below.

Aruba AP-105 @toh:aruba
316 Hits, Last modified:
device. Surprisingly, this device packs a 16MiB SPI flash chip as well as 128MiB of RAM. /*****/ /* How to add images =======... flashing tool or device, such as a [[https://www.raspberrypi.org/documentation/hardware/raspberrypi/spi/README.md | Raspberry Pi]]. === Generic Process === If you are not usin... rom to read/write to the SPI flash * That your SPI reader is a linux SPI Dev (ex, a Raspberry Pi wired to the SPI Flash) 1. Create a full dump... t in a safe place <code> flashrom -r AP105-stock-SPI-dump.rom -p linux_spi:dev=/dev/spidev0.0,spispeed=16500 -c MX25L12835F/MX25L12845E/MX25L12865E </code> 2. Create a copy of
Pine64 RockPro64 v2.1 @toh:pine64
444 Hits, Last modified:
====== Pine64 RockPro64 v2.1====== ~~NOTOC~~ The Pine64 RockPro64 is a single-board-computer with a PCIe 4x connector,... ttle, 2 big), plenty of RAM and storage. {{media:pine64:pine64-rockpro64-v2.1_pcb_top.jpg?400|RockPro64}} ===== Supported Ve... card slot]] | ==== Photos ==== {{media:pine64:pine64-rockpro64-v2.1_pcb_top2.jpg?600|}} {{:media:pine64:pine64-rockpro64-v2.1_pcb_back.jpg?600|}} ==== Serial ==== -> [[docs:techref:hardware:port.s
Wireless Access Point / Dumb Access Point / Dumb AP @docs:guide-user:network:wifi
33 Hits, Last modified:
box> <color #ed1c24>**Note**</color> <color #ff7f27>The term "Dumb Access Point" appears to have originated in the Raspberry Pi world. From the perspective of a generic network ... s range. For example, if the main router LAN is 192.168.1.1, set the Dumb AP's LAN port to be 192.168.1.2 * Set the DNS server and gateway to the main router's address (192.168.1.1 in this example
MikroTik RB750Gr3 (non-native support, will be obsolete) @toh:mikrotik
761 Hits, Last modified:
EDE image) - Power OFF the router - Connect SPI programmer to the Winbond W25Q128 SPI flash chip - Power up the SPI chip directl... flasher|arduino]] or a [[https://www.flashrom.org/RaspberryPi|Raspberry Pi]]. == Constructing the image == It's possible ... he exact procedure for flashing the image to the W25Q128FV flash chip depends on your flasher. In this example, I used a bus pirate with flashrom. The connections and commands f... | ==== Flash Layout ==== ^ Layer0 | m25p80 spi32766.0: w25q128 (16384 KiB) |||||| ^ Layer1 | *
OpenWrt v21.02.0-rc1 Changelog @releases:21.02
29665 Hits, Last modified:
cm2708-gpu-fw:</nowiki>** <nowiki>add support for Raspberry Pi 4</nowiki> //<color #ccc>(</color><color #282>+70</color><color #ccc>,</color><color #f00>-10</... :</nowiki>** <nowiki>add bit variant to redundant RaspberryPi</nowiki> //<color #ccc>(</color><color #282>+14</color><color #ccc>,</color><color #f00>-2</c... bc478a07422db94f1bcda16|f781582]]'' **<nowiki>brcm2708:</nowiki>** <nowiki>Add Raspberry Pi 4 support</nowiki> //<color #ccc>(</color><color ... 96c6177c939826bfd4de31b|39ddb25]]'' **<nowiki>brcm2708:</nowiki>** <nowiki>add support for Raspberry Pi 2B 1.2</nowiki> //<color #ccc>(</color><color #28
TP-Link TD-W8970 v1 @toh:tp-link
1499 Hits, Last modified:
rick]] Quoting [[https://forum.openwrt.org/viewtopic.php?pid=279395#p279395|**joseba_g**]]: >(...) >As programmer I use buspirate, however its easy to use other things, like a raspberry, or even computer motherboard. only need point f... y.com/6labs/blog/demystifying-hardware-security-%E2%80%93-part-iii/|spi programing post]] when I'm writing flash one of ... is easy and fast. ==== Corrupted Uboot ==== Use RaspberryPI SPI programming header with POMONA clip-in programmer
TP-Link Archer MR200 @toh:tp-link
1018 Hits, Last modified:
code> Read the previous flash contents <code> pi@raspberrypi:~/flashrom $ ./flashrom -p linux_spi:dev=/dev/spidev0.0 -c MX25L6405D -r part_original.bin flashrom v1.1 on Linu... 05_1476936302791w.zip’ saved [33320162/33320162] pi@raspberrypi:~/flashrom $ mv Archer_MR200\(EU\)_V1_160905_1476936302791w.zip original_fw.... 905/How to upgrade TP-LINK Wireless AC Router.pdf pi@raspberrypi:~/flashrom $ mv Archer\ MR200\(EU\)_V1_160905/Archer\ MR200v1_0.9.1_1.1_up_bo... configs.bin </code> Flash the new file <code> pi@raspberrypi:~/flashrom $ ./flashrom -p linux_spi:dev=/dev/spidev0.0 -c MX25L6405D -w new_bootloader_firmware_configs.bin fla
Pine64 PINE A64+ @toh:pine64
386 Hits, Last modified:
port, expansion port for optional Bluetooth 4.0/802.11 b/g/n expansion board, Raspberry Pi compatible 40-pin GPIO header, 34 pin Euler Bus and 10 pin Expansion Bus. PINE A64 has 512Mb Ram and 10/100 ethernet while PINE A64+ provides 1024/2048Mb Ram and gigabit ethernet. OpenWrt build target [[docs:techre... uart0.jpg}} ^ Serial connection parameters\\ for Pine64 PINE A64 | 3.3V 115200, 8N1 | ^ UART0 | EXP:\\ TXD 7, RXD 8, GND 9 |
Astoria Networks / Arcadyan ARV7519RW22-A-LT (Orange Livebox 2.1) @toh:arcadyan
1846 Hits, Last modified:
nolink}} | **WARNING:** Starting at least from 01/2015 the Livebox 2.1 features a very different hardware despite it has the same aspect.\\ The only external dif... etup serial console conection (Its posible to use Raspberry Pi and it's UART I/O port) **Attention do it with a ... **4. Replace bootloader with U-boot** - Launch picocom \\ '' picocom -b 115200 /dev/ttyUSB0'' - Power on the device - Inme... \ Flash Checking Again - fw/ui... Failed.\\ Unzipping Tiny Kernel at 0x80002000 ... failed : 4 !!\\ To access Bootloader prom
OpenSSL benchmarks @docs:guide-user:perf_and_log
3162 Hits, Last modified:
| 3300.5 | 248.2 | 281.5 | | r44379 | Broadcom BCM2709 | Raspberry PI 2 Model B | ARMv7 Processor rev 5 (v7l) | 38.40 *... | 1484.6 | 144.7 | 119.0 | | r44379 | Broadcom BCM2709 | Raspberry PI 2 Model B | ARMv7 Processor rev 5 (v7l) | 38.4 | ... .2 | 36.2 | 29.8 | | r36088 Attitude Adjustment (12.09) | Broadcom BCM2708 | [[toh:raspberry_pi_foundation:raspberry_pi| Raspberry Pi Model B]] | ARM1176JZF-S | 697.95 | 1.0.1e | 1... 405380 | 2143570 | 1.7 | 58.2 | 5.8 | 4.7 | | r10121 | Broadcom BCM2710 | Raspberry Pi 3 B+ | 1.4GHz 64-bit 4 core ARM Cortex A53 | 38.4
  • Last modified: 2021/04/26 21:14
  • by hauke