Search

You can find the results of your search below.

OpenSSL benchmarks @docs:guide-user:perf_and_log
3789 Hits, Last modified:
| Raspberry PI 2 Model B ... | Raspberry PI 2 Model B ... 48 bits 0.016559s 0.019379s 60.4 51.6 </code> * raspberry pi 3 model B, raspian lite 8.1 , openssl OpenSSL 1.0.1k 8 Jan 2015 <code> The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes md5 6491.83k 15158.
SoC (System on a Chip) @docs:techref:hardware
54 Hits, Last modified:
href:hardware:soc:soc.broadcom.bcm33xx]] === brcm2708 (= Raspberry Pi) === * OpenWrt support is WIP * no, there are... g/toh/xavi/xavi_7968]] * -> [[toh:linksys:wag54g2]] ==== Marvell ==== === orion === Marvell MV88F**5**18x/MV88F528x * ->[[docs:techref:hardware:soc:soc.marvell]] === kirkwood === Marvell MV88F**6**1xx/MV88F62xx * ->[[docs:techref:hardware:soc:soc.marvell]]
SD card @docs:guide-user:installation:installation_methods
19 Hits, Last modified:
d. Common devices that use this procedure include Raspberry Pi and NanoPi. ==== Graphical Utilities ==== Install [[https... * compressed * newer images include a hidden f2fs filesystem, which is optimized for flash memory... appropriately - e.g. /dev/sda PARTITION="$DEVICE"2 FS_SIZE="$(sudo unsquashfs -s "$PARTITION" | grep... o resize it you'll need the offset of the hidden f2fs or ext4 filesystem (depending on the size of yo
brcm2708 @docs:techref:targets
13 Hits, Last modified:
====== brcm2708 ====== * Broadcom 2708/2835 (used in the Raspberry Pi) This target was renamed to [[docs:techref:targets:bcm27xx|b... pported using the kernel from ​https://github.com/raspberrypi ===== Other info ===== * [[https://git.lede... org/?p=source.git&a=search&h=HEAD&st=commit&s=brcm2708:|Latest git commits for this target]] * Link... -- col : subtarget filter : Target=brcm2708 summarize : 1 rownumbers : 1 ---- ++++ ++++F
bcm27xx @docs:techref:targets
40 Hits, Last modified:
to bcm27xx after the 19.07 release. * Broadcom 2708/2835 (used in the Raspberry Pi) ===== Status ===== Fully supported using the kernel patches from ​https://github.com/raspberrypi ===== Other info ===== * [[https://git.lede... .org/?p=source.git&a=search&h=HEAD&st=commit&s=bcm27xx:|Latest git commits for this target]] * [[do... nal-software:imagebuilder|Image builders]] for bcm27xx * [[https://downloads.openwrt.org/snapshot
CrowdSec @docs:guide-user:services
527 Hits, Last modified:
on on a dedicated device in your network (maybe a Raspberry Pi) and only install the firewall bouncer on the Ope... metrics </code> Sample output: <code> INFO[17-10-2021 10:36:19 AM] Local Api Metrics: +------------... -------------------+--------+--------+ INFO[17-10-2021 10:36:19 AM] Local Api Machines Metrics: +------------... --------+------------+--------+------+ INFO[17-10-2021 10:36:19 AM] Local Api Bouncers Metrics: +------------
Irqbalance @docs:guide-user:services
124 Hits, Last modified:
0 GIC-0 44 Level ttyS0 36: 15572107 0 MPIC 8 Level eth1 37: 2380424 0 MPIC 12 Level eth0 38: 8759 0 GIC-0 50 Level ... 1060900.xor 47: 0 0 f1018100.gpio 24 Edge gpio-keys 48: 0 0 f1018100.gpio 29 Edge gpio-keys 49: 1430 22168991
DDNS Client DuckDNS @docs:guide-user:services:ddns
4 Hits, Last modified:
listing on Github. * [[http://www.reddit.com/r/raspberry_pi/comments/1mqb9f/duckdns_a_free_ddns_just_got_bett
OpenWrt SystemReady @docs:guide-user
24 Hits, Last modified:
ng HW testing | | ADLINK | ADLINK I-Pi SMARC IMX8M Plus (2 GB LPDDR4) ... | :?: | Missing HW testing | | Raspberry Pi | Raspberry Pi 4 Model B | Broadcom BCM2711 | 6.1 | main ... ing | | Renesas | Renesas HiHope RZ/G2M
Bluetooth presence detection @docs:guide-user:hardware:bluetooth
19 Hits, Last modified:
detection system to activate a relay by using a GPIO (or doing anything else), when a bluetooth devic... s bluez-utils kmod-usb-core kmod-usb-uhci kmod-usb2 usbutils start bluetooth: service dbus start ... ol scan In my case the desired MAC Address is 30:21:15:13:9C:29 **Note:** The device should remain in "discoverable mode", if you do not want to let y
Rescue from failed firmware upgrade @docs:guide-user:troubleshooting
36 Hits, Last modified:
| [[https://community.tp-link.com/en/home/forum/topic/81462?page=1|TP-Link forum TFTP recovery documentation]... ces (e.g. SD-cards) ===== Examples: the different Raspberry PI's, devices of PC Engines). OpenWrt devices that ... -505]] and [[http://forums.dlink.com/index.php?topic=44909.msg162511#msg162511|D-Link Forum]]. * Inofficial notes of [[https://fccid.io/2AH9TW826/Users-Manual/User-Manual-2994820|ZBTLink
OpenWrt Debricking Guide @docs:guide-user:troubleshooting
168 Hits, Last modified:
rt]] ---- * [[https://forum.openwrt.org/viewtopic.php?id=35462]] <WRAP center round alert 60%> FIXME This page ... commands for your router could be different! === Raspberry Pi === If you don't have a USB serial ttl but have a Raspberry Pi, you can use it to connect to the router's serial pins. The Raspberry Pi's uart works at 3.3V which is the correct voltage... past we used to suggest that people shorted a few pins of the flash; when CFE booted and attempted to perform the CRC32 there would be a flash read error which would cha
How to capture, filter and inspect packets using tcpdump or wireshark tools @docs:guide-user:firewall:misc
44 Hits, Last modified:
n has confirmed its still working on a Xiaomi and Raspberry Pi device running 22.03.2 </WRAP> ===== Capturing packets from an OpenWrt ... n eth1, link-type EN10MB (Ethernet), capture size 262144 bytes 13:16:55.036711 IP 192.168.1.94.41146 > 121.59.12.182.443: Flags [.], ack 2010466204, win
Serial Cables @docs:techref:hardware
142 Hits, Last modified:
alogue-products-null&prodCategoryID=167&title=TTL-232R-RPi |FTDI's TTL-232R-RPi Raspberry Pi / 3.3v boards (£)]] You may need to rewire the t... ll down to Software Utilities, and download the UF2 under "Debugging using another Raspberry Pi Pico")// Then you should only wire (and disregard ot... an be found in the document "Getting started with Raspberry Pi Pico" ==== Build or hack your own USB - Serial cabl... uct_info.php?products_id=199|Breakout Board for CP2103 USB to Serial w/ GPIOs]]. * [[http://apple.clickandbuild.com/cnb/sho
AdGuard Home @docs:guide-user:services:dns
66 Hits, Last modified:
SB port to run AGH. [[https://forum.openwrt.org/t/raspberry-pi-zero-as-a-router-attached-ethernet-gadget/112329|Using a Pi Zero for AGH]]. ==== DNS latency/performance ==== For the best performance and lowest latency on... f your choice configured. This wiki recommends keeping dnsmasq/unbound as your local/PTR resolver for ... === Flash/storage space requirements ==== The compiled ''AdGuardHome'' binary has grown since the 0.1
USB Guest configuration @docs:guide-user:hardware
49 Hits, Last modified:
JTAG @docs:techref:hardware
96 Hits, Last modified:
PirateBox & LibraryBox @docs:guide-user:hardware
28 Hits, Last modified:
LIRC GPIO blaster @docs:guide-user:hardware
75 Hits, Last modified:
OpenWrt Hardware List @docs:techref:hardware
16 Hits, Last modified:
  • Last modified: 2024/01/03 12:05
  • by aparcar