Search
You can find the results of your search below.
Fulltext results:
- OpenSSL benchmarks @docs:guide-user:perf_and_log
- | Raspberry PI 2 Model B ... | Raspberry PI 2 Model B ... | [[toh:raspberry_pi_foundation:raspberry_pi| Raspberry Pi Model B]] | ARM1176JZF-S ... | Raspberry Pi 3 B+
- Linksys E8450 (aka. Belkin RT3200) @toh:linksys
- 915E. It has five Gigabit Ethernet ports, one USB 2.0 port, 128MiB SPI-NAND Flash (2k+64) and 512MB DDR3 RAM. | {{media... layout ^^^^^^^^^^^^^^^^^^^ ^ Layer0 | raw SPI NAND flash memory chip (2k+64) 128 MiB ||||||||||||||||| ^ Layer1 | mtd0 **/... flash layout ^^^^^^^^^^^^ ^ Layer0 | raw SPI NAND flash memory chip (2k+64) 128 MiB ||||||||||| ^ Layer1 | mtd0 **//bl2/... /mtk_uartboot_arm/releases|Releases for arm (e.g. Raspberry Pi) by forum member LitCastVlog]] * [[https://wiki
- rsalvaterra @developers
- Archer C6 v2 (EU), TP-Link TL-WDR3600 v1.4 * bcm27xx/bcm2708: Raspberry Pi Model B+ * mediatek/filogic: Banana Pi BPI-R3 * mediatek/mt7622: Belkin RT3200 * mvebu/cortexa9: CZ.NIC Turris Omnia (revision CZ11NIC13)
- Arcadyan WE420223-99 @inbox:toh:arcadyan:astoria
- lash chip ==== === Connecting the flash chip to a Raspberry Pi === A Raspberry Pi can be used to program the flash chip in-circuit (thanks FPSUsername for discovering). On the Raspberry Pi, install ''xxd libubootenv-tool mtd-utils'' using ''apt'' on Raspberry Pi OS. To access the flash chip we have a specially ... chip directly to the [[https://pinout.xyz/pinout/spi|Raspberry Pi's SPI pins]]. Use the following connections:
- Creator Ci40 (Marduk) 02KZ/5+ @toh:creator
- faces for external Click boards | ^ Raspberry Pi Interface | Raspberry Pi B+ interface (not simultaneous with Click boards)... 0.086919] ATU Clock Module Loaded [ 0.099164] m25p80 spi1.0: s25fl016k (2048 Kbytes) [ 0.104653] 4 cmdl... artitions found on MTD device spi-nor [ 0.111402] Creating 4 MTD partitions on "spi-nor": [ 0.116900] 0x000000000000-0x00000018000... , Manufacturer ID: 0xc8, Chip ID: 0xb4 [ 0.154724] nand: Gigadevice SPI NAND 512MiB 3,3V [ 0.159970] nand: 512 MiB, SL
- BT Home Hub 2.0 Type A @toh:bt
- m of JTAG hardware** (although this can be just a Raspberry Pi). According to a couple of [[http://openwrt.ebil... t firmware: * [[https://github.com/oxplot/tjtag-pi|tjtag-pi]] via a Raspberry Pi has been used [[https://forum.openwrt.org/viewtopic.php?pid=282665#p282665|three times successfully]], at least once [[https://forum.openwrt.org/viewtopic.php?pid=317966#... d20h b6w_init mpi: No Card is in the PCMCIA slot mpi: device 200x432c found in PCI slot 1, function 0 IPSecContr
- SoC (System on a Chip) @docs:techref:hardware
- href:hardware:soc:soc.broadcom.bcm33xx]] === brcm2708 (= Raspberry Pi) === * OpenWrt support is WIP * no, there are... g/toh/xavi/xavi_7968]] * -> [[toh:linksys:wag54g2]] ==== Marvell ==== === orion === Marvell MV88F**5**18x/MV88F528x * ->[[docs:techref:hardware:soc:soc.marvell]]... marvell]] ==== Moschip ==== === mcs814x === Only 2 known devices (supported). [[https://oldwiki.arch
- SD card @docs:guide-user:installation:installation_methods
- d. Common devices that use this procedure include Raspberry Pi and NanoPi. ==== Graphical Utilities ==== Install [[https... appropriately - e.g. /dev/sda PARTITION="$DEVICE"2 FS_SIZE="$(sudo unsquashfs -s "$PARTITION" | grep... appropriately - e.g. /dev/sda PARTITION="$DEVICE"2 sudo cfdisk "$DEVICE" # select resize, then writ... p://bugs.openwrt.org/index.php?do=details&task_id=2951|link]] or [[docs:guide-user:installation:openw
- Devicepage with forum link + search 2 @playground
- re the connections between the flash chip and the Raspberry Pi. The chip does not need to be de-soldered from th... ed a pomona 8 pin SOIC connector connected to the raspberry pi with the following connections. Only the raspberry pi needs to be powered. The router was not connected... | VCC | 1 | Enable SPI communication on the raspberry pi. <code> $ sudo raspi-config 9 - Advanced Optio... rameter to override. Found Macronix flash chip "MX25L6405" (8192 kB, SPI) on linux_spi. Found Macronix flash chip "MX25L6405D" (8192 kB,
- bcm27xx @docs:techref:targets
- to bcm27xx after the 19.07 release. * Broadcom 2708/2835 (used in the Raspberry Pi) ===== Status ===== Fully supported using the... kernel patches from https://github.com/raspberrypi ===== Other info ===== * [[https://git.lede... .org/?p=source.git&a=search&h=HEAD&st=commit&s=bcm27xx:|Latest git commits for this target]] * [[do... nal-software:imagebuilder|Image builders]] for bcm27xx * [[https://downloads.openwrt.org/snapshot
- VONETS VAR11N-300 @toh:vonets
- ron.info/recover-bricked-bios-using-flashrom-on-a-raspberry-pi/ as a guide for both physical connection as well as walk-through - run `flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=2000 -r vonets-var11n-300.bin` to get the existing ... join them together - lastly `flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=2000 -w fulltestbuild.rom` to flash it back to the ... .508292] bootconsole [early0] disabled [ 0.535826] spi spi0.0: force spi mode3 [ 0.553419] m25p80 spi0.0: w25q32 (4096
- Pine64 PINE A64+ @toh:pine64
- port, expansion port for optional Bluetooth 4.0/802.11 b/g/n expansion board, Raspberry Pi compatible 40-pin GPIO header, 34 pin Euler Bus a... odev: Linux video capture interface: v2.00 [ 0.224550] pps_core: LinuxPPS API ver. 1 registered [ 0.229522] pps_core: Softwa... nux Sound Architecture Driver Initialized. [ 0.249014] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512... 95] dldo2: supplied by regulator-dummy [ 0.864422] vcc-mipi: Bringing 2900000uV into 3300000-3300000uV [ 0
- TP-Link TL-WPA8630P v2 @toh:tp-link
- on/Coreboot-ThinkPads/wiki/Hardware-Flashing-with-Raspberry-Pi|Raspberry Pi]]) * ''flashrom'' >= 1.2 Instructions: * Sep... _layout]]. Example: <code> $ flashrom -p linux_spi:dev=/dev/spidev0.0 -r WPA8630P_v2_stock.rom flashrom v1.2 on Linux 4.19.97-v7+ (arm... meter to override. Found GigaDevice flash chip "GD25Q64(B)" (8192 kB, SPI) on linux_spi. Reading flash... done. </code> ===== Failsafe ... e"). You can also use a 3.3V UART on an SBC (e.g. Raspberry Pi), but it might be inconsisent when capturing earl
- TP-Link Archer MR200 v1 @toh:tp-link
- ery is possible by using a CH340a Programmer or a Raspberry Pi, SOIC8 connector/adapter is required, refer to **... rom the board. SOIC8 Adapter is required. **For Raspberry Pi** | Flash Pin | Meaning | Raspberry Pi | | 1 | CS | 24 | | 2 | DO ... ions between the flash chip and the programmer or Raspberry Pi, refer to **Connecting to Flash Chip** for more i
- Arcadyan AR7516 (aka EE Brightbox 1) @toh:arcadyan
- d:inet/'' for now | | **2** | parallel flash pin 41 (SPI side, above the '2' of label C218) ... | | __**4**__ | RHS of R206 and parallel flash pin 29 (SPI side) | | **__5__** | LHS of R207 and parallel flash pin 32 (SPI side) ... | | **8** | parallel flash pin 43 (SPI side, above the '1' of label C218) | | **