Search

You can find the results of your search below.

OpenSSL Benchmarks @docs:guide-user:perf_and_log
668 Hits, Last modified:
| 3300.5 | 248.2 | 281.5 | | r44379 | Broadcom BCM2709 | Raspberry PI 2 Model B | ARMv7 Processor rev 5 (v7l) | 38.40 *... 7 | 245.3 | 25.3 | 18.7 | | r44379 | Broadcom BCM2709 | Raspberry PI 2 Model B | ARMv7 Processor rev 5 (v7l) | 38.4 | ... 40.2 | 14 | 11.7 | | r36088 Attitude Adjustment (12.09) | Broadcom BCM2708 | [[toh:raspberry_pi_foundation:raspberry_pi| Raspberry Pi Model B]] | ARM1176JZF-S | 697.95 | 1.0.1e | 1... 320 | 6123040 | 6.4 | 245.9 | 18.4 | 19.7 | | r10121 | Broadcom BCM2710 | Raspberry Pi 3 B+ | 1.4GHz 64-bit 4 core ARM Cortex A53 | 38.4
TP-Link TD-W8970 v1 @toh:tp-link
559 Hits, Last modified:
y.com/6labs/blog/demystifying-hardware-security-%E2%80%93-part-iii/|spi programing post]] when I'm writing flash one of ... 0.810955] bootconsole [early0] disabled [ 0.824383] m25p80 spi0.4: w25q128 (16384 Kbytes) [ 0.827718] 4 ofpart partitions found on MTD device spi0.4 [ 0.833136] Creating 4 MTD partitions on "spi0.4": [ 0... 00000fd0000-0x000001000000 : "boardconfig" [ 1.225352] spi-lantiq 1e100800.spi: Lantiq SPI controller (TXFS 8, RXFS 8, DMA 32) [ 1.334775
Raspberry Pi @toh:raspberry_pi_foundation
447 Hits, Last modified:
ingle-board computers]] without one. OpenWrt for Raspberry Pi 2 is compiled with the ARM hard-float kernel ABI (a... ect&0x135|}} ===== Supported Versions ===== The Raspberry Pi is supported in the **brcm2708** target.\\ Subtargets are **bcm2708** for Raspberry Pi 1, **bcm2709** for the Raspberry Pi 2, **bcm2710** for the Raspberry Pi 3, **bcm2711** for the Raspberry Pi 4.\\ \\ **bcm2709** subtarget can be used for **bcm2710** and **bcm2711** devices.\\ This subta
TP-Link TL-WPA8630P v2 @toh:tp-link
333 Hits, Last modified:
SOIC-8 clip with a flash programmer or SBC (e.g. Raspberry Pi). You will need to ask on the forums for a firmwa... ootm_linux 212 set commandline = console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/sbin/init board=AP152 mtdparts=spi0.0:128k(factory-uboot),128k(u-boot),1024k(uImage)... T) linux_params_init 268 line = console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/sbin/init board=AP152 mtdparts=spi0.0:128k(factory-uboot),128k(u-boot),1024k(uImage)... rg 5: board=AP152 [ 0.000000] arg 6: mtdparts=spi0.0:128k(factory-uboot),128k(u-boot),1024k(uImage),6784k(rootfs),64k(mib0),64k(ART) [ 0
TP-Link Archer MR200 @toh:tp-link
307 Hits, Last modified:
re the connections between the flash chip and the Raspberry Pi. The chip does not need to be de-soldered from th... ed a pomona 8 pin SOIC connector connected to the raspberry pi with the following connections. Only the raspberry pi needs to be powered. The router was not connected... | VCC | 1 | Enable SPI communication on the raspberry pi. <code> $ sudo raspi-config 9 - Advanced Optio... rameter to override. Found Macronix flash chip "MX25L6405" (8192 kB, SPI) on linux_spi. Found Macronix flash chip "MX25L6405D" (8192 kB,
BT HomeHub 2.0 Type A @toh:bt
227 Hits, Last modified:
m of JTAG hardware** (although this can be just a Raspberry Pi). According to a couple of [[http://openwrt.ebil... t firmware: * [[https://github.com/oxplot/tjtag-pi|tjtag-pi]] via a Raspberry Pi has been used [[https://forum.openwrt.org/viewtopic.php?pid=282665#p282665|three times successfully]], at least once [[https://forum.openwrt.org/viewtopic.php?pid=317966#... -0x000000fe0000 : "linux" [ 0.588000] bcm63xx-spi bcm63xx-spi: at 0xfffe0800 (irq 9, FIFOs size 542) [ 0.596000] spi_gpio spi_gpio.1: master is un
Arcadyan AR7516 (aka EE Brightbox 1) @toh:arcadyan
193 Hits, Last modified:
d:inet/'' for now | | **2** | parallel flash pin 41 (SPI side, above the '2' of label C218) ... | | __**4**__ | RHS of R206 and parallel flash pin 29 (SPI side) | | **__5__** | LHS of R207 and parallel flash pin 32 (SPI side) ... | | **8** | parallel flash pin 43 (SPI side, above the '1' of label C218) | | **
TP-Link TL-WR741ND @toh:tp-link
182 Hits, Last modified:
| gpio1 | SYS LED | 108 | ::: | | gpio2 | SPI-SS0 | 75 | multiplexed, connected to the SPI flash memory chip| | gpio3 | SPI-CLK | ... overy_for_TL_MR3020]]. I would recommend you use Raspberry Pi for TFTP server. And you need to connect to seri... router will continue bootlooping. ==== WR741ND V2.x ==== <code> ar7240> setenv serverip <TFTP server IP> ar7240> setenv ipaddr <Temp IP address on my
MikroTik RB750Gr3 (non-native support, will be obsolete) @toh:mikrotik
140 Hits, Last modified:
EDE image) - Power OFF the router - Connect SPI programmer to the Winbond W25Q128 SPI flash chip - Power up the SPI chip directl... rduino]] or a [[https://www.flashrom.org/RaspberryPi|Raspberry Pi]]. == Constructing the image == It's possib... | ==== Flash Layout ==== ^ Layer0 | m25p80 spi32766.0: w25q128 (16384 KiB) |||||| ^ Layer1 | *... pinctrl core: add 1 pinctrl maps [ 0.810000] rt2880-pinmux pinctrl: found group selector 9 for spi [ 0.810000] rt2880-pinmux pinctrl: request pin
Aruba AP-105 @toh:aruba
140 Hits, Last modified:
device. Surprisingly, this device packs a 16MiB SPI flash chip as well as 128MiB of RAM. /*****/ /* How to add images =======... tool or device, such as a [[https://www.raspberrypi.org/documentation/hardware/raspberrypi/spi/README.md | Raspberry Pi]]. === Generic Process === If you are not u... rom to read/write to the SPI flash * That your SPI reader is a linux SPI Dev (ex, a Raspberry Pi wired to the SPI Flash) 1. Create a full dump... t in a safe place <code> flashrom -r AP105-stock-SPI-dump.rom -p linux_spi:dev=/dev/spidev0.0,spispeed=16500 -c MX25L12835F/MX25L12845E/MX25L12865E </code> 2. Create a copy of
Pine64 RockPro64 v2.1 @inbox:toh:pine64
140 Hits, Last modified:
RockPro64 | 3.3V, 1500000 baud, 8N1 | //Standard Raspberry Pi GPIO header pinout:// More info about UART connec... istributor 1 region 0:0x00000000fef20000 [ 0.082245] GICv3: CPU1: using allocated LPI pending table @0x00000000f6060000 [ 0.082294] ... stributor 2 region 0:0x00000000fef40000 [ 0.114296] GICv3: CPU2: using allocated LPI pending table @0x00000000f6070000 [ 0.114327] ... istributor 101 region 0:0x00000000fefa0000 [ 0.210593] GICv3: CPU5: using allocated LPI pending table @0x00000000f6120000 [ 0.210621]
Pine64 PINE A64+ @toh:pine64
127 Hits, Last modified:
port, expansion port for optional Bluetooth 4.0/802.11 b/g/n expansion board, Raspberry Pi compatible 40-pin GPIO header, 34 pin Euler Bus a... odev: Linux video capture interface: v2.00 [ 0.224550] pps_core: LinuxPPS API ver. 1 registered [ 0.229522] pps_core: Softwa... nux Sound Architecture Driver Initialized. [ 0.249014] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512... 95] dldo2: supplied by regulator-dummy [ 0.864422] vcc-mipi: Bringing 2900000uV into 3300000-3300000uV [ 0
Creator Ci40 (Marduk) 02KZ/5+ @toh:creator
126 Hits, Last modified:
faces for external Click boards | ^ Raspberry Pi Interface | Raspberry Pi B+ interface (not simultaneous with Click boards)... 0.086919] ATU Clock Module Loaded [ 0.099164] m25p80 spi1.0: s25fl016k (2048 Kbytes) [ 0.104653] 4 cmdl... artitions found on MTD device spi-nor [ 0.111402] Creating 4 MTD partitions on "spi-nor": [ 0.116900] 0x000000000000-0x00000018000... , Manufacturer ID: 0xc8, Chip ID: 0xb4 [ 0.154724] nand: Gigadevice SPI NAND 512MiB 3,3V [ 0.159970] nand: 512 MiB, SL
Meraki MR18 @toh:meraki
96 Hits, Last modified:
(though this not difficult; a method using only a Raspberry Pi is described below) In the event that you have a... ^ Flash Method ^ | 25.11 and Up | [[#JTAG]] only | | 24-* to 25.9 | [[#Flashing Method C|Method C]] | | 22-* to 23-*
Meraki MR18 installation using JTAG and OpenOCD @toh:meraki:mr18
49 Hits, Last modified:
process {{:media:meraki:mr18-reprogramming-using-raspberry-pi.jpg?200|}} ==== Disassembly ==== Remove the rubber fe... meraki:mr18-uart.jpg?200|}} Connect these to the Raspberry Pi's own UART using jumper wire: ^ Raspberry Pi ^ MR18 ^ Purpose ^ | 6 | UART 1 | Ground | | 8 | UART 2 | Pi to MR18 | | 10 | UART 3 | MR18 to Pi |
OpenWrt Debricking Guide @docs:guide-user:troubleshooting
41 Hits, Last modified:
Serial Cables @docs:techref:hardware
40 Hits, Last modified:
Arcadyan VRV9510KWAC23 (AKA Livebox Next) @toh:arcadyan
37 Hits, Last modified:
JTAG @docs:techref:hardware
30 Hits, Last modified:
SoC (System on a Chip) @docs:techref:hardware
27 Hits, Last modified:
stintel @developers
11 Hits, Last modified:
  • Last modified: 2020/12/09 22:33
  • by hauke