Search
You can find the results of your search below.
Fulltext results:
- OpenSSL benchmarks @docs:guide-user:perf_and_log
- | 28.2 | 23.1 | | r36088 | Atheros AR7161 rev 2 | NETGEAR WNDR3700/WNDR3800/WNDRMAC | MIPS 24Kc V7.4 | 452.19 | 1.0.... | 12.7 | 13.3 | | r48532 | Atheros AR7161 rev 2 | NETGEAR WNDR3700/WNDR3800/WNDRMAC | MIPS 24Kc V7.4 | 452.19 | 1.0.... .4 | 39.4 | | r11208 | Qualcomm Atheros IPQ8065 | Netgear Nighthawk X4S R7800 | ARMv7 Processor rev 0 (v7l)... | 15.6 | 16.1 | | r16325 | Atheros AR7161 rev 2 | Netgear WNDR3800 | MIPS 24Kc V7.4 | 451.58 | 1.1.1m | 555
- Installing OpenWrt @docs:guide-user:installation
- ch, just so long as it's not the WAN port) of the WNDR3700. - connect your serial cable to the header on the WNDR3700 and set your local terminal program (eg. minicom)... t it's recognized by the u-Boot firmware. Use the wndr3700.c program that was posted by *aorlinsk* on the forums here http://aorlinsk2.free.fr/openwrt/wndr3700/ and run it from the TFTP server's data directory
- IPsec Performance @docs:guide-user:services:vpn:strongswan
- 680 | [[toh:d-link:dir-825|D-Link DIR-825]] [[toh:netgear:wndr3700|Netgear WNDR3700]] | 28.2 | 28.5 | 32.4 | 24.6 | | MIPS 24k |
- Extending the router ports with a managed switch with VLANs @docs:guide-user:network:vlan
- ts correctly. Quite a few devices (e.g. the [[toh:netgear:wndr3700|Netgear WNDR3700 v1]]) number their internal ports differently fro