Search

You can find the results of your search below.

Meraki MR52
37 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... es not load via TFTP, try again with the Ethernet link to 10Mb/s Half-Duplex. - (MR42 only) Do not con... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... <WRAP bootlog> <nowiki> U-Boot 2012.07-gd040ed5-dirty [local,local] (Mar 29 2016 - 07:59:21) DRAM:
Meraki MR33
34 Hits, Last modified:
ys/fs/pstore/dmesg-ramoops-* 2>/dev/null [ 11.478259] /usr/bin/check_bootreason: reading file : No such file or directory [ 11.496857] ln: /usr/bin/slowfcgi: File ... ent_rx: WMI UNIFIED SERVICE READY event [ 16.368251] Firmware_Build_Number:92 [ 16.371477] num_rf_... _id 4 idx 2 num_units 53 unit_len 4096, [ 16.471825] idx 0 req 1 num_units 0 num_unit_info 2 unit si... ost uses 2.2 [ 16.685042] acfg_attach: 2892: Netlink socket created:cdc57000 [ 16.690287] SPECTRAL :
Meraki mini
33 Hits, Last modified:
roducts/EvaluationKits/TTL-232R-3V3.htm It plugs directly into a USB host port on one end, and the Mer... x21 IMR: 0x88 WD : 0xd68e68bd WDC: 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A... you will have the following files in the bin/ subdirectory: <code> openwrt-atheros-2.6-root.jffs2-128
Meraki Z1
27 Hits, Last modified:
0). * Local computer (Static IP of 192.168.0.2) directly wired to one of the LAN ports. * A local w... ernet (LAN only) to the Z1, where the ethernet is directly wired to your local machine. (To prevent the... efault) Trying to register dev faulty etc Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled cons... toring. TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Re
Meraki MR42
26 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... solve this. You can also try manually setting the link speed to 10Mb/s Half-Duplex. - Once a solid whi... es not load via TFTP, try again with the Ethernet link to 10Mb/s Half-Duplex. - (MR42 only) Do not con... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi
Meraki MR32
21 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... egistered protocol family 1 [ 0.490000] PCIE0: LINKSTA reg 0xbe val 0x1001 [ 0.490000] reg[0xac]=0... eg[0xd2]=0x8, reg[0xdc]=0x2, reg[0xde]=0x1, PCIE0 link=0 [ 0.860000] PCIE1: LINKSTA reg 0xbe val 0x10
Meraki MR16
20 Hits, Last modified:
Wrt v. <= 19 to OpenWrt v. >= 20) ==== Migrating directly from ar71xx has not been thoroughly tested, ... read the U-Boot environment correctly, as per the link above. 5) Run ''fw_setenv bootcmd bootm 0xbf0a00... FTP server and place the above files in the /tftp directory. * Make sure you have a serial connectio... === <WRAP bootlog> <nowiki>U-Boot 1.1.4-g5416eb09-dirty (Mar 3 2011 - 16:28:15) AP96 (ar7100) U-boot
Meraki MR24
20 Hits, Last modified:
to the MR24 (speed is 115200). * Local computer directly wired to the LAN port of the MR24 set to 192... k L2-cache enabled [ 0.005808] PCIE0: Checking link... [ 0.005815] PCIE0: Device detected, waiting for link... [ 0.005824] PCIE0: link is up ! [ 0.110621] PCI host bridge /plb/pciex@d00000000 (primary) ran
Meraki MR18
9 Hits, Last modified:
/www.usbjtag.com|USBJTAG NT]] to flash the device directly. To ID/Detect the flash you need to send a P... UART and Ethernet to the MR18, with the Ethernet directly wired to your local machine. This is also do... est -f /MERAKI_ARCH ; then # Mount new root mkdir /rootfs mount /dev/mtdblock$ROOTFSMTD /rootfs ... set button for 12~ seconds. The LED should start blinking, and then turn off. After the LED turns off, r
Meraki MR12
7 Hits, Last modified:
your way around permissions, copying files etc. Links are provided as additional reading and guidance.... 2|riptidewave's git files/patches]] into separate directory and merge into above clone. * [[docs:gui... re. [[https://www.youtube.com/watch?v=StyuaTFF2So|Link]]. * Configure your PC to a static IP (It appea... see video) and place the above files in the /tftp directory. [[http://kin.klever.net/pumpkin|Pumpkin TF
Meraki MX60
6 Hits, Last modified:
. * Local computer (Static IP of 192.168.1.101) directly wired to the WAN port. * A local TFTP serv... /]]. Then put the file into your TFTP server root directory and rename it to buck.bin 2. Start your TF... dline registered (default) [ 0.202475] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled ▒[ 0.232784] serial8250.0: ttyS0 at MMIO 0x4ef600400 (irq = 19, base_bau
  • Last modified: 2024/01/03 12:05
  • by aparcar