Search

You can find the results of your search below.

GL.iNet GL-MT6000
74 Hits, Last modified:
, dual-band, 4x4, 2 x 2.5Gbit WAN, 4 x 1Gbit LAN, link aggregation, 1GB DDR4 RAM, 8GB eMMC storage, and ... t WED [[https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-aql-and-wifi-latency/155930/58/|appears ... aka airtime fairness. More information is [[:toh:linksys:e8450#wireless_ethernet_dispatch_wed_hw_accele... openwrt/commit/590eaaeed59a9eb6637a1480587fc410de182523|commit]]. It is not recommended to change these
GL.iNet GL-MV1000 (Brume) / GL.iNet GL-MV1000W (Brume-W)
44 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... .g. ''ip addr add dev $yournic 192.168.1.2/24; ip link set $yournic up''. If you’re already in an ''192.... new partition (e.g. ''/dev/mmcblk1p3''). - ''mkdir /mnt/bigroot; mount /dev/mmcblk1p3 /mnt/bigroot''... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi
GL.iNet GL-USB150 (aka Microuter)
16 Hits, Last modified:
vironment size: 1203/32764 bytes uboot> tftpboot Link down: eth1 Ethernet mode (duplex/speed): 1/100 Mb... dline registered (default) [ 0.533973] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ ... - [ 5.778484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Press the [f] key and hit [enter] to... r] to select the debug level [ 7.852597] eth0: link up (100Mbps/Full duplex) [ 7.855720] IPv6: ADD
GL.iNet GL-MT300A
19 Hits, Last modified:
* * of the firmware for this device. Provide links to firmware images, * * active t... i>U-Boot 1.1.3 (Dec 23 2015 - 18:37:46) Board: Ralink APSoC DRAM: 128 MB relocate_code Pointer2 at: 87... er deadline registered (default) [ 0.560000] ralink-usb-phy usbphy: invalid resource [ 0.560000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [
GL.iNet GL-AP1300
62 Hits, Last modified:
==== Upgrade via uboot ==== Please refer to the link: https://docs.gl-inet.com/en/3/troubleshooting/de... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... 95739904 bytes (91 MiB, 754 LEBs), journal size 4825088 bytes (4 MiB, 38 LEBs) [ 22.608670] UBIFS (u... 1617]:INFO:Chip version 0x1401 [ 31.798300] qca_link_polling_select[1279]:INFO:link-polling-required n
GL.iNet GL-MT300N V1
13 Hits, Last modified:
>> Standard size for photos: add ?400 to the medialink */ /* When uploadi... with Reset Button | | 3.3VD | - | 3.3V | | LINK4 | 44 | Unused | | LINK3 | 43 | Shared with toggle switch on side of device | ==== PoE ==== ... i>U-Boot 1.1.3 (Nov 28 2015 - 17:35:15) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb
GL.iNet GL-AR300M-Lite
23 Hits, Last modified:
. It can be used by clicking the "Use WAN as LAN" link on the startpage of the latest original firmware ... 'ndp -a'', or the like) can be used to reveal the link-local address. ==== OEM installation using the T... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... nel: [ 0.562253] ar724x-pci ar724x-pci.0: PCIe link is down kern.warn kernel: [ 0.567713] register
GL.iNet GL-B2200
32 Hits, Last modified:
* * of the firmware for this device. Provide links to firmware images, * * active t... 0x48000000 [ 0.567366] qcom-pcie 40000000.pci: link up [ 0.567631] qcom-pcie 40000000.pci: PCI hos... 1617]:INFO:Chip version 0x1401 [ 15.725747] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist [ 15.731976] ssdk_switch_register
GL.iNet GL-B1300
43 Hits, Last modified:
>> Standard size for photos: add ?400 to the medialink */ /* When uploadi... uidle: using governor menu [ 0.234068] <CORE> glink_init: IPC Logging Disabled [ 0.234835] IPC log... 1587]:INFO:Chip version 0x1401 [ 19.398176] qca_link_polling_select[1281]:INFO:link-polling-required node does not exist [ 19.406250] ssdk_switch_register
GL.iNet GL-AR150
26 Hits, Last modified:
random: nonblocking pool is initialized [ 130.658254] eth1: link up (1000Mbps/Full duplex) [ 130.661478] br-lan: ... h1) entered forwarding state [ 131.157366] eth1: link down [ 131.657121] br-lan: port 1(eth1) entered disabled state [ 132.848549] eth0: link up (100Mbps/Full duplex) [ 132.851661] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 160.847373] eth0: link down [ 1
GL.iNet GL-AR750
42 Hits, Last modified:
... Booting image at: 0x9f060000 Trying eth0 eth0 link down FAIL Trying eth1 eth1 link down FAIL Using eth0 device Tx Timed out ping failed; host 192.168.1.2 ... dline registered (default) [ 0.743464] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ ... 81] console [ttyS0] disabled [ 0.776689] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud
GL.iNet GL-X750 (Spitz)
34 Hits, Last modified:
==== Upgrade via uboot ==== Please refer to the link: https://docs.gl-inet.com/en/3/troubleshooting/de... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... export: 3 gpio(s) exported [ 0.343288] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ ... using ehci-platform [ 13.078920] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0233 PQ:
GL.iNet GL-X300B
32 Hits, Last modified:
==== Upgrade via uboot ==== Please refer to the link: [[https://docs.gl-inet.com/en/3/troubleshooting/... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... resolution 3ns, wraps every 6607641598ns [ 0.008251] Calibrating delay loop... 432.53 BogoMIPS (lpj=... export: 3 gpio(s) exported [ 0.279524] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [
GL.iNet GL-XE300
19 Hits, Last modified:
>> Standard size for photos: add ?400 to the medialink */ /* When uploadi... resolution 3ns, wraps every 6607641598ns [ 0.008256] Calibrating delay loop... 432.53 BogoMIPS (lpj=... 151530] ar724x-pci 180c0000.pcie-controller: PCIe link is down [ 0.175152] PCI host bridge to bus 000... export: 2 gpio(s) exported [ 0.343230] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [
GL.iNet GL-MT3000
78 Hits, Last modified:
.168.8.1/cgi-bin/luci</nowiki>'' There is also a link in the GL.iNet web UI under Advanced Settings *... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... l: GL.iNet GL-MT3000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] On node 0 totalpages: 13
GL.iNet GL-AR750S
56 Hits, Last modified:
GL.iNet GL-MT1300 (Beryl) v1
50 Hits, Last modified:
GL.iNet GL-AR300M
23 Hits, Last modified:
GL.iNet GL-E750 (Mudi)
21 Hits, Last modified:
GL.iNet 64xx
27 Hits, Last modified:
  • Last modified: 2024/01/03 12:05
  • by aparcar