Search

You can find the results of your search below.

Arcadyan VGV7510KW22 (o2 Box 6431)
60 Hits, Last modified:
the full 16MB NOR flash (I tried flashing gluon directly, but it showed that the device arcadyan_vgv7... nboot web interface (without rs232)]] This Forum link helped me understand the [[https://forum.openwrt.... http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/6F878CF760C559BD482576E00022E6CC/?OpenDocument&EPN=MX29GL128E|MXIC MX29GL128EL
Arcadyan ARV7506PW11 (Alice IAD 4421 / o2 Box 4421)
75 Hits, Last modified:
your PPPoE/VoIP data, you need to dump the config directly from the flash as described [[http://hph.nam... p the flash as described in step 2. ===== Serial link ===== Hooking up to the serial with 115200/8N1 en... hone on Selected Channel for FXS SLIC only || PCM Link on Selected Channel to FXO for FXS only || PCM Link off Selected Channel to FXO for FXS only || DAA off
Arcadyan AR7516 (aka EE Brightbox 1)
17 Hits, Last modified:
{{http://beta.speedtest.net/result/6311225732.png?direct&275|}} ==== VPN Performance ==== OpenVPN: Ke... not controllable. ​ WiFi state is probably wired directly to the BCM43227. Ethernet port activity lig... _underlined__ numbers are relatively accessible. Directions (above/right) are mostly relative to a lab... of ''flashrom'', it is possible to flash an image directly to the SPI chip (has been done). Convenient
Arcadyan VRV752DHW22 (Vodafone EasyBox 903)
44 Hits, Last modified:
http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/6F878CF760C559BD482576E00022E6CC/?OpenDocument&EPN=MX29GL128E|MXIC MX29GL128EL... mediatek.com/_en/01_products/04_pro.php?sn=1047|Ralink/Mediatek RT3062F]], 802.11b/g/n 300MBit/s | ^ Pho... icense-Identifier: GPL-2.0+ ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).o ++ ++CO
Arcadyan ARV7510PW
15 Hits, Last modified:
ip is not on a mini-PCI card, but rather soldered directly on the main board. The wireless in these mod... | | **Wireless:** | Ralink RT2860T, 802.11n 300 Mbps, 2.4 GHz, 2 antennas ... [ 226.088000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready Failed to connect to the switch. Use... b.com/openwrt/openwrt/tree/28664a3e9029b68a0f11299825c73457a658f170|latest OpenWrt]] [[https://gist.git
  • Last modified: 2021/04/26 21:14
  • by hauke