Search

You can find the results of your search below.

Meraki mini
43 Hits, Last modified:
x21 IMR: 0x88 WD : 0xd68e68bd WDC: 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A tun: Universal TUN/T... you will have the following files in the bin/ subdirectory: <code> openwrt-atheros-2.6-root.jffs2-128... or http server containing the files from the bin/ directory. ===== Testing kernel via tftp or http ===
Meraki MR33
42 Hits, Last modified:
ys/fs/pstore/dmesg-ramoops-* 2>/dev/null [ 11.478259] /usr/bin/check_bootreason: reading file : No such file or directory [ 11.496857] ln: /usr/bin/slowfcgi: File ... =cde804c0 target_write_addr=417240 seg_info=ce9f8b10 [ 14.982619] ol_transfer_swap_struct:Code swap... ent_rx: WMI UNIFIED SERVICE READY event [ 16.368251] Firmware_Build_Number:92 [ 16.371477] num_rf_... _id 4 idx 2 num_units 53 unit_len 4096, [ 16.471825] idx 0 req 1 num_units 0 num_unit_info 2 unit si
Meraki Z1
41 Hits, Last modified:
ernet (LAN only) to the Z1, where the ethernet is directly wired to your local machine. (To prevent the Z1 from reaching the internet) - Follow ... ootloader = 2239 bootconsole [early0] enabled CPU revision is: 0001974c (MIPS 74Kc) ath_sys_frequency: ... efault) Trying to register dev faulty etc Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled cons... ehci ath-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0
Meraki MR12
14 Hits, Last modified:
er deadline registered (default) [ 0.608] Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled [ 0.622] serial8250: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A [ 0.66... em=0x10000000, irq=48 hw_base=0xb0000000 ver=0x80 rev=0x2 [ 6.695] module load for ath_pci load 0.08100
Meraki MR18
14 Hits, Last modified:
UART and Ethernet to the MR18, with the Ethernet directly wired to your local machine. This is also done to prevent the MR18 from reaching the internet. 2. Onc... est -f /MERAKI_ARCH ; then # Mount new root mkdir /rootfs mount /dev/mtdblock$ROOTFSMTD /rootfs ... set button for 12~ seconds. The LED should start blinking, and then turn off. After the LED turns off, r... the MR18 for 10+ seconds. You should see the LED blink, and then turn off. Once the LED turns off you ca
  • Last modified: 2020/12/09 22:33
  • by hauke