Search
You can find the results of your search below.
Fulltext results:
- Linksys EA8300
- compatible with OpenWRT and cannot be transferred directly. So having previously configured the device with a Linksys account, [[https://www.linksys.com/us/support-... t 2023) and 22.03.3, OpenWrt is now able to flash directly a Linksys OEM image. Force the flash as the warning message inform you to do so. You can easily reverse to Linksys OEM if you need to. === U-Boot === [[#serial... ong sprung style plug as shown below. This will prevent momentary loss of power when the plug/cable is disturbed. {{media:linksys:ea6350_v3:ea6350_v3_plug.jpg?300|Linksys EA635
- Linksys E8450 (aka. Belkin RT3200)
- p to USB to TTL adapter}} * Close up:{{:media:linksys-e8450-belkin-rt3200-hooked-up-for-debugging-closeup.jpg?direct&400|}} * Run the mtk_uartboot program with y... el": "^E8450$"} } --> ==== Serial ==== {{:media:linksys-e8450-belkin-rt3200-serial-jtag-ports.png?direct&400|:}} <!-- ToH: { "source": "json", "do... i> </WRAP>\\ ==== Installer video ==== {{ :media:linksys:linksys-e8450-installer.gif?direct | Installation video of Web and Serial action}... 77] init: - preinit - [ 2.776174] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 2.784571] mtk_soc_eth 1b100000.ethernet
- Linksys EA6350 v3
- stallation procedure containing images for [[:toh:linksys:ea8300|Linksys EA8300]] is almost identical and worth reviewing) ==== Installation of 23.05 or newer ==== ... fine with this device but you should not install directly 23.05 from Linksys OEM stock firmware or do upgrade from OpenWrt ... 2.03.3, the recommended advice for this and other Linksys dual partition routers, is to **revert** to booting Linksys stock firmware from the o... ater in this wiki page. As it is now possible to revert to Linksys OEM firmware provided OpenWrt 23.03.5+ is inst
- Linksys E2500 v3
- ministration - Oct. 2015 */ //Front://\\ {{media:linksys:e2500_front_cleaned.jpg?direct&400|}} //Back://\\ {{media:linksys:e2500_back_cleaned.jpg?direct&400|}} //Backside label://\\ {{media:linksys:e2500_side_cleaned.jpg?direct&400|}} ==== Opening the case ==== **Note:** This wi... the case. </WRAP> //Main PCB://\\ Top : {{media:linksys:e2500_pcb_front_cleaned.jpg?direct&400|}} Back : {{media:linksys:e2500_pcb_back_
- Linksys WRT1900AC
- ====== Linksys WRT1900AC ====== /* This template is intended to be used via https://openwrt.org/meta/cr... age */ The WRT1900AC was the first of the [[toh:linksys:wrt_ac_series]] to be released. It featured 4 ... .11ac wave 1 (80MHz) capable device.\\ The second revision of the hardware removed the internal cooling... bles are loaded into the device due to moves from Linksys in response to FCC changes. It also changed to
- Linksys MR8300
- t 2023) and 22.03.3, OpenWrt is now able to flash directly a Linksys OEM image. Force the flash as the warning message inform you to do so. You can easily reverse to Linksys OEM if you need to. Here is a useful [[https:... es for this device, then remove the EXAMPLEs The Linksys MR8300 has the following buttons: ^ BUTTON ... url", "comments"], "filterColumns": {"brand": "^Linksys$", "model": "^MR8300$"} } --> ==== Photos ===
- Linksys EA6350 v4
- olor> If both partitions are overwritten with non-Linksys firmwares, there is <color #ed1c24>**no safe method**</color> of reverting back to Linksys OEM firmware at time of wri... or this purpose. The bootcounter has a flaw that prevents direct install of OpenWrt. Use this procedure to bypa... unter flaw set back partition B as bootable (with Linksys GUI). To prevent this, add this code to ''etc/rc.local'' <code... ==== Upgrading OpenWrt ===== The advice for other Linksys dual partition routers, is to **revert** to booting Linksys stock firmware from the o
- Linksys EA8500
- he Serial Port of this specific device: {{:media:linksys:ea8500_serial.jpg?direct&400x200|}} Newer revisions have no header: {{media:linksys:ea8500_serial_new.jpeg?direct&400x200|}} Pins are marked 1-5 on PCB, use... UND </code> ^ Serial connection parameters\\ for Linksys EA8500 V1 | screen /dev/tty.usbserial 115200,-... eed/mode) = (0/0/48000000/0) 128 MiB MMC: PCI0 Link Intialized PCI1 Link Intialized In: serial Out
- Linksys E1200 v2
- with only a Linksys logo. Linksys E1200 v2 with Linksys logo: was able to install 15.05.1 by upgrading firmware directly from linksys firmware, but wireless is not s... e=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled ser... md=[killall -9 waninfo ] stop_wan_ipv6: done RTNETLINK answers: No such file or directory Set 0 to /proc/sys/net/ctf/wan_mode ... cmd=[killall nlinkd ] killall: cannot kill pid 493: No such process
- Linksys WRT1200AC
- inistration - Oct. 2015 */ //Front://\\ {{:media:linksys:linksys_wrt1200_ac_front.jpg?direct&400|**Front of the casing**}} //Back://\\ {{:media:linksys:linksys_wrt1200ac_back.jpg?direct&400|**Back of the casing**}} //Backside label://\\ {{:media:linksys:linksys_wrt1200ac_label.jpg?direct&400|**Backside label**}} ==== Opening the cas... lide into the rear feet //Main PCB://\\ {{:media:linksys:linksys_wrt1200ac_pcb.jpg?direct&400|**Photo of assembled PCB top view}} ===
- Linksys EA7500 V1
- with OpenWrt firmwares, and you won't be able to revert back to Linksys OEM firmware using above method. ==== Recove... r Using interface ath0 with hwaddr c0:56:27:39:aa:b1 and ssid "Linksys" ath0: interface state UNINITIALIZED->ENABLED ... face ath1 with hwaddr c0:56:27:39:aa:b2 and ssid "Linksys 5" ath1: interface state UNINITIALIZED->ENABLE... dge.bridge-nf-call-iptables = 1 dev.nss.general.redirect = 1 [utopia] Not setting ppp_clamp_mtu on dsli
- Linksys EA7500 v2
- write both partitions, there will be no method of reverting to booting and using Linksys firmware at this time. The “factory” openwrt image can be flashed directly from OEM stock firmware. After the flash the... 500v2_2.0.8.194281_prod.img'' downloaded from the Linksys website). - When the router reboots flash th... https://forum.openwrt.org/t/problem-installing-on-linksys-ea7500v2/116253|OpenWrt forum]] ===== Restore
- Linksys E5400
- ====== Linksys E5400 ====== /* This template is intended to be used via https://openwrt.org/meta/create... level dual band wireless router sold in as N600 (Linksys E2500v4), AC750 (Linksys E5300), AC1000 (Linksys E5350) and AC1200 (Linksys E5400). Devices E2500v4, E5300 and E5350 are limi
- Linksys WHW03 V2
- mage show the exact pinout of the port: {{ :media:linksys:whw03v2_serial_pinout.jpeg?direct&600 | Serial port pinout }} ^ Serial connection parameters\\ for Linksys WHW03 V2 | 115200, 8N1, 3.3V | ===== Bootloa... total: 262144 , CONFIG_DEVINFO_SIZE: 262144 PCI0 Link Intialized In: serial Out: serial Err: ser... 'kernel@1' kernel subimage Description: ARM Linksys Linux-3.14.77 Type: Kernel Image
- Linksys EA7300 v1
- ls to detach the cover. //Main PCB://\\ {{:media:linksys:ea7300v2_pcb.jpg?direct&400|}} ==== Serial ==== -> [[docs:techref:har... GND </code> ^ Serial connection parameters\\ for Linksys EA7300 v1 | 115200, 8N1 | ==== JTAG ==== ->... RCOMM v1.03.0, Release date: 2016/08/05 Board: Ralink APSoC DRAM: 256 MB relocate_code Pointer at: 8ff... ..============================================ Ralink UBoot Version: 5.0.0.0 --------------------------