Search

Fulltext results:

ZTE ZXHN H268A

239 Hits, Last modified: 2 months ago

0x060400 pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:02:00.0: [14e4:4360] type 00 class 0x... oard: brcm_board_init entry Failed to create a netlink socket for monitor DYING GASP IRQ Initialized and... 7200 bytes Allocated FAP0 SWQ_FAP2HOST_WFD_Q mem=ad3f6000 : 7200 bytes Allocated FAP1 SWQ_FAP2HOST_WFD... 00 bytes Allocated FAP0 TM SDRAM Queue Storage (abd33700) : 390144 bytes @ abe80000 Allocated FAP1 TM

ZTE MF286D

123 Hits, Last modified: 8 weeks ago

in/sh: can't create /sys/class/leds/led:wifi-red/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:wifi-white/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:w... in/sh: can't create /sys/class/leds/led:wifi-red/blink: nonexistent directory WAL channel change freq=5320, mode=0 flags=... 0 rx_ok=1 tx_ok=1 /sys/class/leds/led:wifi-white/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:w

ZTE ZXV10 H201L

70 Hits, Last modified: 2 months ago

to use and configure the hardware button(s). The Linksys WRT54GL has two buttons. They are Reset and Se... unction, CPU port is 4 ADDRCONF(NETDEV_UP): eth0: link is not ready eth0 up device eth0 entered promiscu... onInitSSI] get parameter from Flash failed!userssid3 11930:23:01 [DB][Warn] [dbc_person_wlan(68)dbPers... g.bEnable[1] eth0 down ADDRCONF(NETDEV_UP): eth0: link is not ready eth0 up Eth0 Enable_Auto_MDIX = 1 !!

ZTE ZXA10 F660

42 Hits, Last modified: 10 months ago

chan 6 cann't Find a chan 7 Init port 0 mii0: link up mii2: link up Port 3: Link-up, Full-duplex, Speed-100Mbps. cpcp port 3 state change! 11930:23:19 [KIGMP][Error] [b... [pon_eth_cmapi.c(352)CmUniGetPortCon] CmEthGetPortLinkState error! (Slot:0, Port:0)Call CmUniGetPortConf