Fulltext results:
- Xiaomi Mi Router AC2100 @inbox:toh:xiaomi
- routers here: {{:media:xiaomi:rm2100-vs-r2100.jpg?linkonly|rm2100-vs-r2100.jpg}} ===== OpenWrt support ... penWrt support.// * OpenWrt forum thread: (add link) ***/ /*** if info available: uncomment and fil... ware ===== //List experimental firmware download links here.// //None at this time.// * External image (add link) * trunk image (add link) * ... ***/ =====
- fwfiles_snapshots @meta
- 01-a1-squashfs-sysupgrade.bin openwrt-ar71xx-tiny-dir-615-c1-squashfs-factory.bin openwrt-ar71xx-tiny-dir-615-c1-squashfs-sysupgrade.bin openwrt-ar71xx-tiny-dir-615-i1-squashfs-factory.bin openwrt-ar71xx-tiny-dir-615-i1-squashfs-sysupgrade.bin openwrt-ar71xx-tiny-dir-615
- LB-LINK BL-W1200 @toh:lb-link
- ====== LB-LINK BL-W1200 ====== /* This template is intended to be used via https://openwrt.org/meta/cre... .org/meta/create_new_device_page */ {{ :media:lb-link_bl-w1200.jpeg?200|LB-LINK BL-W1200}} //The BL-W1200 Wireless Router is based on the MT7620A SoC. It ha... l Data align : c,c,c,c,c,c,c filter : Brand=LB-LINK filter : Model=BL-W1200 ---- /*---- datatable -
- ASUS RT-AC85P / ASUS RT-AC65P @toh:asus
- tton and keep pressed until the power LED starts blinking slowly. - Upload [[https://downloads.openwrt... tton and keep pressed until the power LED starts blinking slowly. On the Linux side you should see that ... **//u-boot//** | mtd1 **//u-boot-env//** | mtd2 **//factory//** | mtd3 **//factory2//** | mtd... t needs to be pressed until the power LED starts blinking slowly. Window starts at this point | ^ TFTP c
- T-Home Speedport W 504V (ARV8539PW22) @toh:t-com
- (NETDEV_UP): ffuplink: link is not ready [ 47.776154] IPv6: ADDRCONF(NETDEV_CHANGE): ffuplink: link becomes ready [ 47.802087] br-wan: port 1(ffuplink_wan) entered blocking state [ 47.806678] br-wan: port 1(ffuplink_wan) entered disabled state [ 47.884524] device ffuplink_wan entered promiscuous mode [ 47.968923] br-wa
- Comtrend VG-8050 @toh:comtrend
- [0x000000-0x0007ff] pci 0000:00:00.0: supports D1 D2 pci 0000:00:00.0: PME# supported from D0 D3hot D3... ock at 0x05fc0000 nand_read_bbt: Bad block at 0x07d20000 brcmnandCET: Status -> Deferred brcmnand_scan... SPU: SUCCEEDED GACT probability NOT on Mirror/redirect action on u32 classifier input device chec... igured TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 ov
- Xiaomi R3P Pro @toh:xiaomi
- cNormalStart] Normal start. Enable MAC TX [ 50.561542] wifi_sys_linkup(), wdev idx = 0 [ 50.565760] wtc_acquire_grou... pied wtbl_idx:127 for WDEV_TYPE:1 [ 50.565760] LinkToOmacIdx = 0, LinkToWdevType = 1 [ 50.693530] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssIn... 808844] HT: greenap_cap = 1 [ 52.812159] ChipI=7615, Value=0, pcie_aspm in profile=0 [ 52.844858] I
- Turris CZ.NIC Omnia @toh:turris
- nia-medkit-latest.tar.gz to USB flash to the root directory and put the USB flash to the front panel US... eth0, eth1 and eth2. Interface eth2 is connected directly to WAN/SFP on the back side of the router, t... ly not supported in OpenWrt, only port 5 is the uplink to the switch. SFP is also not supported yet. See... o upstream U-boot. ===== Hardware mods ===== Not directly a hardware mod, just a possibility for an ad
- TP-Link Archer C5 v4 @toh:tp-link
- ====== TP-Link Archer C5 v4 ====== This page was created specifically for the Archer C5 v4 which uses a... Brazil. //Front - Back - Version//\\ {{:media:tplink:archerc5:c5_v4_front.jpg?200|}} {{media:tplink:archerc5:c5_v4_back.jpg?200|}} {{media:tplink:archerc5:c5_v4_hwversion.jpg?250|}} ===== Supported Ver
- Sercomm AD1018 @toh:sercomm
- ====== {{:media:sercomm:ad1018-casing.png?0x200&nolink& |}} {{section>meta:infobox:broadcom_wifi#infobo... n the picture\\ {{media:sercomm:ad1018-spimod.jpg?direct&400|}}\\ don't desolder R228 yet\\ \\ - Conn... //ad1018-lede-ram.elf// is into the TFTP server's directory)\\ \\ - Now with LEDE RAM firmware runnin... | ''0x00c0000'' | 0x0140000 | 1280 | | 03 | mtd2 | cferam2 | jffs2 | ram bootloader 2
- Xiaomi Mi Router 4A Gigabit Edition (4A Gigabit / R3Gv2) @inbox:toh:xiaomi
- 903] device wlan1 entered promiscuous mode [ 22.615386] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.628715] br-lan: port 3(wlan0)... 23.561952] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 23.568718] br-lan: port 2(wlan1... 24.581174] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.587874] br-lan: port 3(wlan0
- Netgear R6220 @toh:netgear
- od: can't read '/lib/modules/2.6.30.9/kernel/fs/jbd2/jbd2.ko': No such file or directory insmod: can't read '/lib/modules/2.6.30.9/k... wan mode: (-1) [SYSTEM]/bin/ip -6 route del RTNETLINK answers: No such file or directory [SYSTEM]/bin/ip -6 route del RTNETLINK answers: No such file or directory [SYSTEM]/bin/ip -6 route del RTNETLINK answers: No such file or directory [SYSTEM]/bin/ip -6 route del RTNETLINK answers: No s
- Arcadyan/Astoria Easybox 904xDSL (VGV952CJW33-E-IR) @toh:astoria
- the rootfs and kernel files and go to these data dir\\ <code>$cd /tmp/usb/a1</code> - Write kernel to nand\\ <code> $flash_eraseall /dev/mtd2 $nandwrite -p /dev/mtd2 openwrt-lantiq-xrx200-VGV952CJW33-uImage </code> - write rootfs to nand\\ <... (e.g. TFTPD32) by putting fullimage.img in server directory. - Image must have name "fullimage.img"
- Xiaomi Redmi Router AC2100 @toh:xiaomi
- le. <code> # A quick http server for the current directory (ie. Where you have placed your OpenWrt ima... ^ Wireless | MT7603 2.4GHz 802.11bgn + MT7615 5.0GHz 802.11ac | ^ Ethernet | 4x 10/100... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... e:\\ {{:media:xiaomi:redmi-router-ac2100-uart.jpg?direct&400|}} ^ Serial connection parameters\\ for X
- Linksys EA8500 @toh:linksys
- nk is Up - 1Gbps/Full - flow control off [ 19.966151] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 21.219677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.225207] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.225973] br-lan: port 1(eth0.... 21.236361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 21.242339] IPv6: ADDRCONF(NETDE
