Search

You can find the results of your search below.

Ubiquiti UniFi AC HD
59 Hits, Last modified:
e. Copy the OpenWrt sysupgrade image to the /tmp directory of the device using scp. Default IP address... v/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11 Write the OpenWrt sysupgrade image to the mtd p... Layer1 | **mtd0** \\ ''SBL1'' \\ 128 KiB | **mtd1** \\ ''MIBIB'' \\ 64 KiB | **mtd2** \\ ''SBL2''... B | **mtd9** \\ ''APPSBLENV'' \\ 64 KiB | **mtd10** \\ ''EEPROM'' \\ 64 KiB | **mtd11** \\ ''boo
Ubiquiti UniFi AP AC
32 Hits, Last modified:
''md5sum BZ*.bin'' should return: ''5bb23b387defcbd1f6cda5819c7905e5'', if you trust a SHA-512 checksu... he matching OpenWRT Firmware for your device. * Directly connect Linux-PC and Unifi-device. If your d... 8.1.20. The ''mtd'' helper program, which writes directly to flash, has been removed from later versio... /mtd'' for the correct path). The zero byte will direct the bootloader to try kernel0 first. A byte o
Ubiquiti LiteAP AC (LAP-120 or LBE-5AC-16-120)
29 Hits, Last modified:
fwupdate.real binary (which is in fact just a symlink to ubntbox) must be patched: <code bash> hexdump... fwupdate.real binary (which is in fact just a symlink to ubntbox) must be patched: <code bash> hexdump... he latest original airOS firmware to the ''/tmp'' directory on the device, in this case ''WA.v8.7.0.421... the OpenWrt **sysupgrade** image to the ''/tmp'' directory on the device, in this case ''openwrt-ath79
Ubiquiti LiteAP AC
25 Hits, Last modified:
| 00040000 | 00010000 | u-boot | | mtd1 | 00010000 | 00010000 | u-boot-env | | m... | 00040000 | 00010000 | u-boot | | mtd1 | 00010000 | 00010000 | u-boot-env | | ... fe mode ===== During power on, the blue LED will blink for a few seconds. During this time, press the "R... ct (i.e. a paper clip) a few times until the LED blinks faster. In a few moments the device will enter f
Ubiquiti LiteBeam 5AC Gen2
14 Hits, Last modified:
CPE packed inside feedhorn that attaches to small directional reflector included in the package. airOS ... |||||| ^ Layer1 | mtd0 | mtd1 | mtd2 | mtd3 ... Layer1 | mtd0 **//u-boot//** 256KiB | mtd1 **//u-boot-env//** 64KiB | mtd2 **//firmware//*... 00ffff] [ 0.034000] pci 0000:00:00.0: supports D1 D2 [ 0.034000] Returning IRQ 64 [ 0.035000]
  • Last modified: 2020/12/09 22:33
  • by hauke