Search

You can find the results of your search below.

Ubiquiti UniFi AC HD
63 Hits, Last modified:
e. Copy the OpenWrt sysupgrade image to the /tmp directory of the device using scp. Default IP address... v/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11 Write the OpenWrt sysupgrade image to the mtd p... Layer1 | **mtd0** \\ ''SBL1'' \\ 128 KiB | **mtd1** \\ ''MIBIB'' \\ 64 KiB | **mtd2** \\ ''SBL2''... B | **mtd9** \\ ''APPSBLENV'' \\ 64 KiB | **mtd10** \\ ''EEPROM'' \\ 64 KiB | **mtd11** \\ ''boo
Ubiquiti LiteAP AC (LAP-120 or LBE-5AC-16-120)
29 Hits, Last modified:
fwupdate.real binary (which is in fact just a symlink to ubntbox) must be patched: <code bash> hexdump... fwupdate.real binary (which is in fact just a symlink to ubntbox) must be patched: <code bash> hexdump... he latest original airOS firmware to the ''/tmp'' directory on the device, in this case ''WA.v8.7.0.421... the OpenWrt **sysupgrade** image to the ''/tmp'' directory on the device, in this case ''openwrt-ath79
Ubiquiti LiteAP AC
25 Hits, Last modified:
| 00040000 | 00010000 | u-boot | | mtd1 | 00010000 | 00010000 | u-boot-env | | m... | 00040000 | 00010000 | u-boot | | mtd1 | 00010000 | 00010000 | u-boot-env | | ... fe mode ===== During power on, the blue LED will blink for a few seconds. During this time, press the "R... ct (i.e. a paper clip) a few times until the LED blinks faster. In a few moments the device will enter f
  • Last modified: 2021/04/26 21:14
  • by hauke