You can find the results of your search below.

AVM FRITZ!Box 7312
132 Hits, Last modified:
ootlogs]] -> TestBuild: Ethernet working, ADSL-Uplink [[|has to be confi... ntiq-xway-avm_fritz7312-squashfs-sysupgrade.bin mtd1 ftp> quote REBOOT </code> Please mind that th... uests the **sysupgrade** image to be flashed to mtd1, not the initramfs image! ==== via fritzflash =... ation/installation_methods/fritzflash]] from the linked page [[
AVM FRITZ!Box 4040
57 Hits, Last modified:
06.4-ipq40xx-avm_fritzbox-4040-squashfs-eva.bin mtd1 local: openwrt-18.06.4-ipq40xx-avm_fritzbox-4040-squashfs-eva.bin remote: mtd1 227 Entering Passive Mode (192,168,178,1,12,0) 15... in 23.97 secs (224.3076 kB/s) ftp> quote check mtd1 150 Flash check 0x095CB3AB </code> For openwrt-1... vm_fritzbox-4040-squashfs-eva.bin" dev="eth0" ip link set down "$dev" ip addr flush dev "$dev" ip link
AVM FRITZ!Box 7330 (SL)
53 Hits, Last modified:
te MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 ftp> quote REBOOT ftp> quit </code> Important... ing up again or watch in serial terminal: erase mtd1 .... flash ..... Power on happens around five se... n PCB//\\ {{media:avm:fritzbox_7330_pcb_front.jpg?direct&300|}} {{media:avm:fritzbox_7330_pcb_back.jpg?direct&300|}} ==== Serial ==== -> [[docs:techref:har
AVM FRITZ!Box 7320
52 Hits, Last modified:
bin passiv quote MEDIA FLSH put firmware.image mtd1 quote REBOOT quit </code> Important: while flashi... lind flash") or watch in serial terminal: erase mtd1 .... flash ..... (optional) erase configuration ... media:avm:fritzbox_7320:fritzbox_7320_pcb_top.jpg?direct&300|}} {{media:avm:fritzbox_7320:fritzbox_7320_pcb_bottom.jpg?direct&300|}} ==== Serial ==== -> [[docs:techref:har
49 Hits, Last modified:
d the correct image has to be chosen. **<color #ed1c24>Please read the detailed [[https://git.openwrt... a:avm:fritzbox_3370:fritzbox_3370-rev5_micron.jpg?linkonly|Micron MT29F1G08ABADA NAND flash chip on AVM ... Memory {{:media:nand04gw3b2dn6_on_fritz3370.png?linkonly|ST-Micro NAND04GW3B2DN6 NAND flash chip on AV... 70:fritzbox.3370_hynix.hy27uf081g2m.nand.chip.jpg?linkonly |Hynix HY27UF081G2M NAND chip on AVM FRITZ!Bo
39 Hits, Last modified:
rx200-avm_fritz7362sl-initramfs-kernel.bin'' - Blinking red power LED indicates that OpenWrt is runnin... CP. - Transfer the sysupgrade image to the /tmp directory of the router using scp - ssh to 192.168.... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... ERCPU: Embedded 7 pages/cpu @8194b000 s5760 r8192 d14720 u65536 [ 0.000000] pcpu-alloc: s5760 r8192
AVM FRITZ!Box Fon WLAN 7360 (SL)
35 Hits, Last modified:
ETDEV_CHANGE): br-lan: link becomes ready [ 73.861533] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready [ 73.942854] eth0: port 1 got link [ 75.078627] br-lan: port 1(eth0.1) entered forward... 87.138667] IPv6: ADDRCONF(NETDEV_CHANGE): nas0: link becomes ready [ 89.353868] pppoe-wan: renamed f... 64bit] [ 89.443244] pci 0000:01:00.0: supports D1 [ 89.443271] pci 0000:01:00.0: PME# supported f
AVM FRITZ!Box 7360 v2
19 Hits, Last modified:
s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... xrx200-avm_fritz7360-v2-squashfs-sysupgrade.bin mtd1 // using the correct location for the squashfs-sy... asesize name mtd0: 00020000 00020000 "urlader" mtd1: 01f60000 00020000 "firmware" mtd2: 0027471c 0002... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi
  • Last modified: 2020/12/09 22:33
  • by hauke