Search

You can find the results of your search below.

AVM FRITZ!Box 7312
132 Hits, Last modified:
ootlogs]] -> TestBuild: Ethernet working, ADSL-Uplink [[fritz.box.wlan.7312#adsl_config|has to be confi... ntiq-xway-avm_fritz7312-squashfs-sysupgrade.bin mtd1 ftp> quote REBOOT </code> Please mind that th... uests the **sysupgrade** image to be flashed to mtd1, not the initramfs image! ==== via fritzflash =... ation/installation_methods/fritzflash]] from the linked page [[https://fritz-tools.readthedocs.io/en/la
AVM FRITZ!Box 4040
59 Hits, Last modified:
MEDIA FLSH binary put <your eva openwrt image> mtd1 quote check mtd1 </code> For openwrt-19.07.2-ipq40xx-generic-avm_fritzbox-4040-squashfs-eva.bin the f... 06.4-ipq40xx-avm_fritzbox-4040-squashfs-eva.bin mtd1 local: openwrt-18.06.4-ipq40xx-avm_fritzbox-4040-squashfs-eva.bin remote: mtd1 227 Entering Passive Mode (192,168,178,1,12,0) 15
AVM FRITZ!Box 7320
54 Hits, Last modified:
bin passiv quote MEDIA FLSH put firmware.image mtd1 quote REBOOT quit </code> Important: while flashi... lind flash") or watch in serial terminal: erase mtd1 .... flash ..... (optional) erase configuration ... media:avm:fritzbox_7320:fritzbox_7320_pcb_top.jpg?direct&300|}} {{media:avm:fritzbox_7320:fritzbox_7320_pcb_bottom.jpg?direct&300|}} ==== Serial ==== -> [[docs:techref:har
AVM FRITZ!Box 7330 (SL)
53 Hits, Last modified:
te MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 ftp> quote REBOOT ftp> quit </code> Important... ing up again or watch in serial terminal: erase mtd1 .... flash ..... Power on happens around five se... n PCB//\\ {{media:avm:fritzbox_7330_pcb_front.jpg?direct&300|}} {{media:avm:fritzbox_7330_pcb_back.jpg?direct&300|}} ==== Serial ==== -> [[docs:techref:har
AVM FRITZ!Box WLAN 3370
48 Hits, Last modified:
d the correct image has to be chosen. **<color #ed1c24>Please read the detailed [[https://git.openwrt... a:avm:fritzbox_3370:fritzbox_3370-rev5_micron.jpg?linkonly|Micron MT29F1G08ABADA NAND flash chip on AVM ... Memory {{:media:nand04gw3b2dn6_on_fritz3370.png?linkonly|ST-Micro NAND04GW3B2DN6 NAND flash chip on AV... 70:fritzbox.3370_hynix.hy27uf081g2m.nand.chip.jpg?linkonly |Hynix HY27UF081G2M NAND chip on AVM FRITZ!Bo
AVM FRITZ!Box 7362 SL
40 Hits, Last modified:
rx200-avm_fritz7362sl-initramfs-kernel.bin'' - Blinking red power LED indicates that OpenWrt is runnin... CP. - Transfer the sysupgrade image to the /tmp directory of the router using scp - ssh to 192.168.... aving like the stock firmware would have booted (blinking green, then just flashing green). It that is t... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi
AVM FRITZ!Box 7490
40 Hits, Last modified:
}} ===== Supported Versions ===== :!: <color #ed1c24>At this moment (December 2018) there is no sup... box_7490:fritzbox_7490_case_bottom_withlables.jpg?direct&500 |Case Bottom}} ** Main PCB ** {{ media:a... tzbox_7490:fritzbox_7490_pcb_top_serialpinout.jpg?direct&500 |PCB with serial Pinout}} ==== Serial ===... ERCPU: Embedded 7 pages/cpu @81914000 s7328 r8192 d13152 u32768 [ 0.000000] Kernel command line: co
AVM FRITZ!Box 4020
36 Hits, Last modified:
off, printenv, printf, ps, pstree, pwd, pwdx, readlink, realpath, reboot, renice, reset, rm, rmdir, rmmod, route, sed, seq, setconsole, setserial, ... , xargs, xz, xzcat, zcat # # ifconfig adsl Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-0... RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ath0 Link encap:Ethernet HWaddr 44:4E:xx:xx:xx:8A ... RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 44:4E:xx:xx:xx:88
AVM FRITZ!Box Fon WLAN 7360 (SL)
36 Hits, Last modified:
ETDEV_CHANGE): br-lan: link becomes ready [ 73.861533] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready [ 73.942854] eth0: port 1 got link [ 75.078627] br-lan: port 1(eth0.1) entered forward... 87.138667] IPv6: ADDRCONF(NETDEV_CHANGE): nas0: link becomes ready [ 89.353868] pppoe-wan: renamed f... 64bit] [ 89.443244] pci 0000:01:00.0: supports D1 [ 89.443271] pci 0000:01:00.0: PME# supported f
AVM FRITZ!Box 7360 v2
29 Hits, Last modified:
xrx200-avm_fritz7360-v2-squashfs-sysupgrade.bin mtd1 </code> 8. When it's finished: <code> exit </cod... xrx200-avm_fritz7360-v2-squashfs-sysupgrade.bin mtd1 local: openwrt-21.02.3-lantiq-xrx200-avm_fritz7360-v2-squashfs-sysupgrade.bin remote: mtd1 227 Entering Passive Mode (192,168,178,1,12,15) 1... asesize name mtd0: 00020000 00020000 "urlader" mtd1: 01f60000 00020000 "firmware" mtd2: 0027471c 0002
AVM FRITZ!Box Fon WLAN 7270
29 Hits, Last modified:
layout === <code> mtd0 0x90000000,0x90000000 mtd1 0x90020000,0x90F80000 mtd2 0x90000000,0x900... nging anything you should backup flash content. mtd1-4 are the single partitions. This could be done i... s not work (not supported :-(): <code> ftp> get mtd1 local: mtd1 remote: mtd1 ftp: setsockopt (ignored): Permission denied ---> PORT 192,168,178,5,206,57
AVM FRITZ!Box 7520 / 7530
28 Hits, Last modified:
0xx/generic/u-boot-fritz7530/|u-boot-fritz7530 subdirectory]]. Place it in the same directory as the ''[[https://github.com/openwrt/openwrt/blob/master/scri... x. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following comma... ramfs** (!) image to a installed TFTP server root directory (see instructions here: [[:docs:guide-user:
AVM FRITZ!Box 5490
19 Hits, Last modified:
5490}} ===== OpenWrt support ===== :!: <color #ed1c24>At this moment (September 2021) there is no su... * Flash the kernel at the "kernel" partition (mtd1)* and the ubi-rootfs to the "ubi" partition (mtd5... | ^ System-On-Chip | EXAMPLE Ralink RT3052 - MIPS 24K V4.12 | ^ CPU/Speed | ... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi
  • Last modified: 2024/01/03 12:05
  • by aparcar