Search

You can find the results of your search below.

ZTE ZXHN H268A
229 Hits, Last modified:
oard: brcm_board_init entry Failed to create a netlink socket for monitor DYING GASP IRQ Initialized and... rocessed =0 dropped =0 [FAP0] Associated DQM=18 dir HOST2FAP [FAP0] ------------------<<<< [FAP0] SWQ... rocessed =0 dropped =0 [FAP0] Associated DQM=19 dir FAP2HOST [FAP0] ------------------<<<< [FAP0] FAP... ent[6] sh: can't create /proc/logcat: nonexistent directory 1192:58:12 [fw_core_mgr][Info] [ipif_api.c(
ZTE MF286D
124 Hits, Last modified:
in/sh: can't create /sys/class/leds/led:wifi-red/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:wifi-white/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:w... in/sh: can't create /sys/class/leds/led:wifi-red/blink: nonexistent directory WAL channel change freq=5320, mode=0 flags=... 0 rx_ok=1 tx_ok=1 /sys/class/leds/led:wifi-white/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:w
ZTE MF286R
48 Hits, Last modified:
.16.1/busybox-mips|here]] and put it in it's root directory. Rename it as "telnetd". - As previously, l... sly generated "root_uImage" into TFTP server root directory. - Deliberately erase "kernel" partition" u... , sometimes the router doesn't establish Ethernet link properly right after booting. **Be patient.** - A... URL and filename with the latest sysupgrade image link. <code> cd /tmp wget http://downloads.openwrt.or
ZTE ZXV10 H201L
35 Hits, Last modified:
to use and configure the hardware button(s). The Linksys WRT54GL has two buttons. They are Reset and Se... driver 11930:22:57 [KSWETH][Notice] [sweth_core.c(505)RegisterSwDrv] Register SW driver, TypeId=1 11930... unction, CPU port is 4 ADDRCONF(NETDEV_UP): eth0: link is not ready eth0 up device eth0 entered promiscu... g.bEnable[1] eth0 down ADDRCONF(NETDEV_UP): eth0: link is not ready eth0 up Eth0 Enable_Auto_MDIX = 1 !!
  • Last modified: 2024/01/03 12:05
  • by aparcar