tion table
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
ata2.00: ... /block/sdc/device). Returning 3
grep: /var/tmp/devlink: No such file or directory
create_devlink:Using new routine.
linuxrc:c... odules.dep
=== checkroot.sh ===
grep: /var/tmp/devlink: No such file or directory
create_devlink:Using new routine.
swapon: c... ering SWP/SWPB emulation handler
[ 1.558875] ata2: SATA link down (SStatus 0 SControl F300)
[ 6.223833] ran
*
* of the firmware for this device. Provide links to firmware images, *
* active t... wd" command to set up a new password
in order to prevent unauthorized SSH logins.
---------------------... >> Standard size for photos: add ?400 to the medialink */
/* When uploadi... ing cores 0x3
Linux version 4.9.79-UBNT (ubnt@8b46a25fc5c7) (gcc version 4.7.0 (Cavium Inc. Version: S
fwupdate.real binary (which is in fact just a symlink to ubntbox) must be patched:
<code bash>
hexdump ... >> Standard size for photos: add ?400 to the medialink */
/* When uploadi... ze passed from bootloader = 16
[ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[ 0.000000] ath_... 64 not registered
[ 13.325000] spectral_init_netlink 54 NULL SKB
[ 13.325000] ol_ath_set_dscp_tid_ma
d, outdoor ethernet router/bridge with integrated directional 5G/NR MIMO antennas. It has a WiFi radio,... /?series=239798
/* * OpenWrt forum thread: (add link) */
/*** if info available: uncomment and fill ... ware =====
//List experimental firmware download links here.//
//None at this time.//
* External image (add link)
* trunk image (add link)
* ...
***/
=====
s
* If you have no time to write certain stuff, link to [[docs:start]]
* [[docs:guide-user:base-syst... *
* of the firmware for this device. Provide links to firmware images, *
* active t... Reset router to factory defaults if it has been previously configured.
* Browse to ''<nowiki>http://... >> Standard size for photos: add ?400 to the medialink */
/* When uploadi
rqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Tota... 4a101000.mdio:00 - Link is Up - 100/Full
[ 15.450599] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BusyBox v1.22.1 (2014-05-30 20:2... information about this board can be found here:
Links:
* [[http://elinux.org/Beagleboard:BeagleBoneB
{:meta:icons:tango:48px-emblem-progress.svg.png?nolink}} | This device is **not supported** yet.|
The T... {{:meta:icons:tango:48px-dialog-warning.svg.png?nolink}}| There are two **very different** versions of t... {{:meta:icons:tango:48px-dialog-warning.svg.png?nolink}}| Please note that area/partition "[5] Flash Ima... {{:meta:icons:tango:48px-dialog-warning.svg.png?nolink}} | **NEVER** put 3.3V on the left side of R65 (a
struction&noheader&nofooter&noeditbtn}}
<color #00a2e8>//However, fear not much, quite a lot has been ... built NAS.
{{:media:xiaomi:xiaomi_mir3p_top.jpg?direct&300|}}
===== Supported Versions =====
---- da... t miwifi_ssh.bin and save the password. (If the redirect download page doesn't work, try with "http://"... able to access the router's web interface.
=== Reverting from OpenWrt to Stock Xiaomi firmware ===
=
{{ media:xiaomi:xiaomi_miwifi-nano_board.png?nolink |}}
===== Supported Versions =====
---- datatabl... code>
- Download the image in the router's /tmp directory. <code>wget http://downloads.openwrt.org/sn... ring on and keep it pressed until the LED starts blinking (~10 seconds), set your IP to 192.168.31.2, an... M. It is in testing, for now. I used PandoraBox-ralink-mt7628-xiaomi-r1cl-squashfs-sysupgrade-r1468-2015
[[docs:techref:hardware:soc|System-On-Chip]] | Ralink MT7620A |
^ [[docs:techref:hardware:cpu|CPU]] @Fr... o [[https://mega.nz/file/tZ1TCKCJ#NtO9htNWrPzhh0UNA2dPtkSD3k67L9niIu2RRlawKfE]] for this & a presumpti... ject or forums.
</WRAP>
All necessary files are linked here [[https://mega.nz/#F!WY0FiTIS!Cl_Dzm4yhzrQ... de>
cd /tmp
mtd write pb-boot-xiaomi3-20180726-0d8505f.img Bootloader
reboot</code>(if there is a updat
See below for details. Another option would be to directly burn the SPI flash chip via a clamp and a bu... download etc, here are some instructions to flash directly OpenWrt/PandoraBox on stock firmware via cod... t the latest firmware, eg: <code># cd /tmp; wget <link to firmware-image as shown above></code>
* ... * Get the latest firmware, eg: ''# cd /tmp; wget <link to firmware-image as shown above>''
* Check t