Search
You can find the results of your search below.
Fulltext results:
- ZyXEL NR7101 @inbox:toh:zyxel
- PoE powered 5G outdoor (IP68) CPE with integrated directional 5G/LTE antennas. /*****/ /* How to add i... penWrt support.// * OpenWrt forum thread: (add link) ***/ /*** if info available: uncomment and fil... ware ===== //List experimental firmware download links here.// //None at this time.// * External image (add link) * trunk image (add link) * ... ***/ =====
- Xunlong Orange Pi R1 Plus @toh:xunlong
- s * If you have no time to write certain stuff, link to [[docs:start]] * [[docs:guide-user:base-syst... * * of the firmware for this device. Provide links to firmware images, * * active t... Reset router to factory defaults if it has been previously configured. * Browse to ''<nowiki>http://... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi
- TI Beaglebone Black @toh:texas_instruments
- rqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Tota... 4a101000.mdio:00 - Link is Up - 100/Full [ 15.450599] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready BusyBox v1.22.1 (2014-05-30 20:2... information about this board can be found here: Links: * [[http://elinux.org/Beagleboard:BeagleBoneB
- T-Home Speedport W 722V Typ B @toh:t-com
- {:meta:icons:tango:48px-emblem-progress.svg.png?nolink}} | This device is **not supported** yet.| The T... {{:meta:icons:tango:48px-dialog-warning.svg.png?nolink}}| There are two **very different** versions of t... {{:meta:icons:tango:48px-dialog-warning.svg.png?nolink}}| Please note that area/partition "[5] Flash Ima... {{:meta:icons:tango:48px-dialog-warning.svg.png?nolink}} | **NEVER** put 3.3V on the left side of R65 (a
- Xiaomi Mi Router 3 Pro (R3P) @toh:xiaomi
- struction&noheader&nofooter&noeditbtn}} <color #00a2e8>//However, fear not much, quite a lot has been ... built NAS. {{:media:xiaomi:xiaomi_mir3p_top.jpg?direct&300|}} ===== Supported Versions ===== ---- da... t miwifi_ssh.bin and save the password. (If the redirect download page doesn't work, try with "http://"... able to access the router's web interface. === Reverting from OpenWrt to Stock Xiaomi firmware ===
- Xiaomi Mi WiFi Nano / Youth (R1CL) @toh:xiaomi
- = {{ media:xiaomi:xiaomi_miwifi-nano_board.png?nolink |}} ===== Supported Versions ===== ---- datatabl... code> - Download the image in the router's /tmp directory. <code>wget http://downloads.openwrt.org/sn... ring on and keep it pressed until the LED starts blinking (~10 seconds), set your IP to 192.168.31.2, an... M. It is in testing, for now. I used PandoraBox-ralink-mt7628-xiaomi-r1cl-squashfs-sysupgrade-r1468-2015
- Xiaomi Mi WiFi R3 (Mi Wifi Router 3 / MIR3 / MI3) @ru:toh:xiaomi
- s:techref:hardware:soc|System-On-Chip (SoC)]] | Ralink MT7620A | ^ [[docs:techref:hardware:cpu|CPU]] @Ча... i>U-Boot 1.1.3 (Apr 15 2016 - 17:46:32) Board: Ralink APSoC DRAM: 128 MB Power on memory test. Memory ... ..============================================ Ralink UBoot Version: 4.2.S.1 --------------------------... disable all power about PCIe [ 0.000000] CPU revision is: 00019650 (MIPS 24Kc) [ 0.000000] Soft
- Xiaomi Mi WiFi R3 (Mi Wifi Router 3 / MIR3 / MI3) @toh:xiaomi
- [[docs:techref:hardware:soc|System-On-Chip]] | Ralink MT7620A | ^ [[docs:techref:hardware:cpu|CPU]] @Fr... o [[https://mega.nz/file/tZ1TCKCJ#NtO9htNWrPzhh0UNA2dPtkSD3k67L9niIu2RRlawKfE]] for this & a presumpti... ject or forums. </WRAP> All necessary files are linked here [[https://mega.nz/#F!WY0FiTIS!Cl_Dzm4yhzrQ... de> cd /tmp mtd write pb-boot-xiaomi3-20180726-0d8505f.img Bootloader reboot</code>(if there is a updat
- Xiaomi Mi WiFi Mini @toh:xiaomi
- See below for details. Another option would be to directly burn the SPI flash chip via a clamp and a bu... download etc, here are some instructions to flash directly OpenWrt/PandoraBox on stock firmware via cod... t the latest firmware, eg: <code># cd /tmp; wget <link to firmware-image as shown above></code> * ... * Get the latest firmware, eg: ''# cd /tmp; wget <link to firmware-image as shown above>'' * Check t
- MikroTik RouterBOARD hAP ac² (RBD52G-5HacD2HnD-TC) @inbox:toh:mikrotik
- ware ===== //List experimental firmware download links here.// //None at this time.// * External image (add link) * trunk image (add link) * ... ***/ ===== Hardware highlights ===== ^ CPU ... 1x 2.0 | Yes | ? | <WRAP info> Early revisions seemed to ship with 256 MiB of RAM (see wik
- Buffalo LinkStation LS421DE @toh:buffalo
- tion table sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) ata2.00: ... /block/sdc/device). Returning 3 grep: /var/tmp/devlink: No such file or directory create_devlink:Using new routine. linuxrc:c... odules.dep === checkroot.sh === grep: /var/tmp/devlink: No such file or directory create_devlink:Using new routine. swapon: c... ering SWP/SWPB emulation handler [ 1.558875] ata2: SATA link down (SStatus 0 SControl F300) [ 6.223833] ran
- Sercomm H500-s @toh:sercomm
- dware ID: QD840 [ 334.145000] Hardware revision: bbic4_rev_a2 [ 334.150000] Band: 5GHz [ 334... May 31 16:56:36 CST 2018 963167REF3 prom init CPU revision is: 0002a080 (Broadcom BMIPS4350) DSL SDRAM ... S=0 Broadcom Logger v0.1 May 31 2018 16:03:32 CPU revision is: 0002a080 (Broadcom BMIPS4350) Primary in... ffffff] pci_bus 0000:00: root bus resource [io 0xa2000000-0xa200ffff] pci 0000:00:00.0: [14e4:435f] t
- TP-Link Archer C7 AC1750 @toh:tp-link
- tftp you press BROWSE and you choose in the main directory i.e. (tftpd32) is the original C7v5 soft tplink, while in other directories there are softs (ddwr... then you need to upload the second from the same directory through the soft browser (tplink_archer-c7-v5). Uploading software: once you have ... 168.1.66'' - see [[https://forum.openwrt.org/t/tp-link-archer-c7-v1-v2-jtag-u-boot-recovery-using-st-link-v2-usb-adapter-clone-known-as-baite/39582/43]] ====
- Shuttle OMNINAS KD20 @toh:shuttle
- sata_oxnas: resetting SATA core [ 8.046548] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.053... sata_oxnas: resetting SATA core [ 22.976537] ata2: link resume succeeded after 1 retries [ 23.586577] a... ata1.00: configured for UDMA/133 [ 24.556587] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 24.564... sata_oxnas: resetting SATA core [ 25.816578] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 25.824
- TP-Link TL-WDR4300 @toh:tp-link
- | | v1.7 | 2050500272 rev 1.3 | 2014/01 | [[tl-wdr4310_v1|TP-Link TL-WDR4310]]. | **NOTE:** The Ethern... nfiguration]]. **NOTES** - **Recent (2016+) TP-Link firmware in the USA may be locked to prevent re-flashing**. If you have such locked firmwa... rt.bin**. This tool will install dd-wrt, and the revert tool will then install the original unlocked TP-Link firmware. To flash dd-wrt (dd-wrt reccomends IE/w... nning at http://192.168.1.1, and you are ready to revert to the unlocked TP-Link firmware. Browse to 192.168.1.1, assign an ID/PW,