Fulltext results:
- fwfiles_snapshots @meta
- a1-squashfs-sysupgrade.bin openwrt-ar71xx-generic-dir-505-a1-squashfs-factory.bin openwrt-ar71xx-generic-dir-505-a1-squashfs-sysupgrade.bin openwrt-ar71xx-generic-dir-825... fi-squashfs-sysupgrade.bin openwrt-ath79-generic-dlink_dir-505-initramfs-kernel.bin openwrt-ath79-generic-dlink_dir-505-squashfs-sysupgrade.bin openwrt-ath79-generic-dlink_di
- fwfiles_19.07.3 @meta
- hfs-sysupgrade.bin openwrt-19.07.3-ar71xx-generic-dir-505-a1-squashfs-factory.bin openwrt-19.07.3-ar71xx-generic-dir-505-a1-squashfs-sysupgrade.bin openwrt-19.07.3-ar71xx-ge... hfs-sysupgrade.bin openwrt-19.07.3-ath79-generic-dlink_dir-835-a1-initramfs-kernel.bin openwrt-19.07.3-ath79-generic-dlink_dir-835-a1-squashfs-factory.bin openwrt-19.07.3-ath79-generi
- fwfiles_19.07.2 @meta
- hfs-sysupgrade.bin openwrt-19.07.2-ar71xx-generic-dir-505-a1-squashfs-factory.bin openwrt-19.07.2-ar71xx-generic-dir-505-a1-squashfs-sysupgrade.bin openwrt-19.07.2-ar71xx-ge... hfs-sysupgrade.bin openwrt-19.07.2-ath79-generic-dlink_dir-835-a1-initramfs-kernel.bin openwrt-19.07.2-ath79-generic-dlink_dir-835-a1-squashfs-factory.bin openwrt-19.07.2-ath79-generi
- OpenSSL Benchmarks @docs:guide-user:perf_and_log
- 16070 | 19.6 | 819.2 | 73.1 | 68.8 | | r48532 | Ralink RT5350 id:1 rev:3 | D-Link DIR-320 B1 | MIPS 24KEc V4.12 | 239.61 | 1.0.2g | 216... | 336.8 | 34.3 | 27.4 | | r39789 | Atheros AR9344 rev 1 | D-Link DIR-835 rev. A1 | MIPS 74Kc V4.12 | 278.93 | 1.0.1e | 33743550 | ... | 280.8 | 28.1 | 23.1 | | r42625 | Atheros AR7161 rev 2 | D-Link DIR-825 rev. B1 | MIPS 24Kc V7.4 | 452.19 | 1.0.1i | ... | 243.9 | 24.6 | 20.6 | | r40877 | Atheros AR7161 rev 2 | D-Link DIR-825 rev. B1 | MIPS 24Kc V7.4 | 452.19 | 1.0.1g |
- TP-Link TD-W8970 v1 @toh:tp-link
- resin/u-boot/releases|u-boot.asc]] | {{media:tplink:td-w8970:td-w8970-v1_boot_sel.jpg?direct&0x200|}} {{media:tplink:td-w8970:td-w8970_serial-boot.jpg?direct&0x200|}} Temporarily connect the left side of R225 to GND, to get into U... sort top xargs bunzip2 dirname free jshn luci-bwc readlink ssh tr yes bzcat dr... og> <nowiki>ROM VER: 1.1.4 CFG 05 DDR autotuning Rev 0.3d DDR size from 0xa0000000 - 0xa3ffffff DDR ch
- TP-Link Archer C50 @toh:tp-link
- TP installation. To create a sysupgrade image to revert from OpenWrt to stock TPlink firmware follow the procedure described here [[ht... e contains Open Wrt image files, an image file to revert from OpenWrt to the TPlink stock firmware and detailed instructions for inst... n via Web GUI and TFTP and . To install using TPlink Web GUI: - Log into the TPlink's stock firmware Web GUI at 192.168.0.1; - Flash the router with '*
- Buffalo LinkStation LS421DE @toh:buffalo
- 032: hctosys: unable to read the hardware clock ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) ata1.00: ... /block/sdc/device). Returning 3 grep: /var/tmp/devlink: No such file or directory create_devlink:Using new routine. linuxrc:c... odules.dep === checkroot.sh === grep: /var/tmp/devlink: No such file or directory create_devlink:Using new routine. swapon: c... dhci: Copyright(c) Pierre Ossman [ 1.225976] ata1: SATA link down (SStatus 0 SControl F300) [ 1.244635] sdh
- Linksys EA8300 @toh:linksys
- and cannot be transferred directly. If you have previously configured the device with a Linksys account, you may need to reset it to factory-d... with OpenWrt firmwares, and you won't be able to revert back to Linksys OEM firmware using above method. ==== JTAG ... = (0/0/48000000/0) 256 MiB MMC: qca_mmc: 0 PCI0 Link Intialized In: serial Out: serial Err: ser... tart D - 2 - pm_driver_init, Delta B - 505015 - sbl1_wait_for_ddr_training, Start D -
- Netgear R7800 @toh:netgear
- == Info ==== ^ Architecture | ARMv7 Processor rev 0 (v7l), arm_cortex-a15_neon-vfpv4 | ^ Vendor | Netgear | ^ Bo... re" 0x000007900000-0x000007980000 : "crashdump" ata1: SATA link down (SStatus 0 SControl 300) 0x000007980000-0x00... 00-0x2900017f] port 0x100 irq 26 [ 5.497002] ata1: SATA link down (SStatus 0 SControl 300) [ 5.502597] ehci... k [ 7.388161] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Press the [f] key and hit [enter] to
- Arcadyan ARV752DPW22 (Vodafone EasyBox 803A) @toh:astoria
- }; </code> Removing the ''read-only'' directive to have <code> ... prompt... Ok. .............................. [abbreviated version, you will see **many** more dots and... ccessfully scan for nearby wifi networks. These links provide information for older versions of OpenWr... u-boot.asc > /dev/ttyUSB0 </code> which will run directly from memory (not flash). Be ready to interr
- Medion Live NASserver P89625 (MD86407) @toh:medion
- UDMA/133 irq 50 ata2: SATA max UDMA/133 irq 50 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: A... unable to open rtc device (rtc0) [ 1.475130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.481... 1.500920] ata1.00: configured for UDMA/133 [ 1.505766] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC44 PQ: ... doesn't support DPO or FUA [ 1.568483] sda: sda1 sda2 [ 1.573918] sd 0:0:0:0: [sda] Attached SC
- ASUS RT-AC85P / ASUS RT-AC65P @toh:asus
- tton and keep pressed until the power LED starts blinking slowly. - Upload [[https://downloads.openwrt... lows you to see better what is going on and will prevent timeouts on the router in case the Linux box d... tton and keep pressed until the power LED starts blinking slowly. On the Linux side you should see that ... ckup copy can then be easily used from OpenWrt to revert the router to the original OEM firmware. If yo
- Linksys EA6350 v3 @toh:linksys
- with OpenWrt firmwares, and you won't be able to revert back to Linksys OEM firmware using above method. ==== Recover... ilable in the community, as descrived below. === Reverting to Linksys firmware using custom 'BackToStock' script ===... com/sh/ikepkmlqfqi02vw/AACuSniTpvQgFTJQ2w7bn8gCa?preview=How+to+revert+Linksys+EA6350v3+to+Linksys+OEM+firmware+v0.3f.pdf|Download: PDF Guide]] ... [[https://forum.openwrt.org/t/optimized-build-for-linksys-ea6350v3-civic/44125/1|Forum: OpenWrt Forum]]
- Netgear R6020 @inbox:toh:netgear
- [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m
- Xiaomi Mi Router AC2100 @inbox:toh:xiaomi
- ] device wlan1 entered promiscuous mode [ 30.111505] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 30.118464] br-lan: port 4(wlan1... ding state [ 31.679796] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx [ 31.687239] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready [ 115.462498] device wlan1 left pr... 119.909043] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 119.915791] br-lan: port 4(wlan1
