Search
You can find the results of your search below.
Fulltext results:
- ZTE ZXHN H268A
- 0 sHardVersion=V1.0 bootPara.runmode=3 CPU revision is: 0002a080 (Broadcom BMIPS4350) Determined... S=0 Broadcom Logger v0.1 Nov 13 2018 14:42:09 CPU revision is: 0002a080 (Broadcom BMIPS4350) Primary in... oard: brcm_board_init entry Failed to create a netlink socket for monitor DYING GASP IRQ Initialized and Enabled Serial: BCM63XX driver $Revision: 3.00 $ Magic SysRq with Auxilliary trigger
- ZTE MF286D
- in/sh: can't create /sys/class/leds/led:wifi-red/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:wifi-white/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:w... in/sh: can't create /sys/class/leds/led:wifi-red/blink: nonexistent directory WAL channel change freq=5320, mode=0 flags=... 0 rx_ok=1 tx_ok=1 /sys/class/leds/led:wifi-white/blink: nonexistent directory /bin/sh: can't create /sys/class/leds/led:w
- ZTE MF286R
- ll use random address from that range. - Put the previously generated "root_uImage" into TFTP server root directory. - Deliberately erase "kernel" partition" u... , sometimes the router doesn't establish Ethernet link properly right after booting. **Be patient.** - A... URL and filename with the latest sysupgrade image link. <code> cd /tmp wget http://downloads.openwrt.or... ] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc) [ 0.000000] SoC:
- ZTE ZXV10 H201L
- | 8MiB | b/g/n 1x1 | 4 x 100 Mb | depends on PCB revision | Yes | Yes | integrated ADSL modem, FXS | ... to use and configure the hardware button(s). The Linksys WRT54GL has two buttons. They are Reset and Se... Yes 1 x 2.0, connector not present on some board revisions | ^ [[docs:techref:hardware:port.serial|Ser... 10-h201l_pcb01.jpg?400|}} **Photo of another PCB revision, SoC heatsink removed**\\ {{media:zte:zte-zx