Search

You can find the results of your search below.

Linksys EA8300
168 Hits, Last modified:
compatible with OpenWRT and cannot be transferred directly. So having previously configured the device with a Linksys account, [[https://www.linksys.com/us/support-... t 2023) and 22.03.3, OpenWrt is now able to flash directly a Linksys OEM image. Force the flash as the warning message inform you to do so. You can easily reverse to Linksys OEM if you need to. === U-Boot === [[#serial... ong sprung style plug as shown below. This will prevent momentary loss of power when the plug/cable is disturbed. {{media:linksys:ea6350_v3:ea6350_v3_plug.jpg?300|Linksys EA635
Linksys EA6350 v3
156 Hits, Last modified:
stallation procedure containing images for [[:toh:linksys:ea8300|Linksys EA8300]] is almost identical and worth reviewing) ==== Installation of 23.05 or newer ==== ... fine with this device but you should not install directly 23.05 from Linksys OEM stock firmware or do upgrade from OpenWrt ... 2.03.3, the recommended advice for this and other Linksys dual partition routers, is to **revert** to booting Linksys stock firmware from the o... ater in this wiki page. As it is now possible to revert to Linksys OEM firmware provided OpenWrt 23.03.5+ is inst
Linksys E8450 (aka. Belkin RT3200)
150 Hits, Last modified:
cfq registered (default) [ 0.126701] mtk-pcie 1a143000.pcie: pcie rc 0 linkup success [ 0.126853] mtk-pcie 1a143000.pcie: ... rough PCIe PME interrupt [ 0.238394] mtk-pcie 1a145000.pcie: Port1 link down [ 0.238530] mtk-pcie 1a145000.pcie: PCI h... 0-0x1a2010ff] port 0x100 irq 249 [ 9.968823] ata1: SATA link down (SStatus 0 SControl 300) [ 9.975162] ehci... i> </WRAP>\\ ==== Installer video ==== {{ :media:linksys:linksys-e8450-installer.gif?direct | Installation video of Web and Serial action}
Linksys WRT1900AC
116 Hits, Last modified:
: new USB bus registered, assigned bus number 1 ata1: SATA link down (SStatus 0 SControl F300) ehci_marvell ehci_... 09:30:16 2016 kern.info kernel: [ 1.242485] ata1: SATA link down (SStatus 0 SControl F300) Mon Jul 11 09:30:1... 1.556691] mvsw61xx 1000000003.mvsw61xx: Using direct addressing Mon Jul 11 09:30:16 2016 kern.info ... kern.notice kernel: [ 2.583070] scsi 1:0:0:0: Direct-Access WD My Passport 0748 1016 PQ:
Linksys MR8300
115 Hits, Last modified:
t 2023) and 22.03.3, OpenWrt is now able to flash directly a Linksys OEM image. Force the flash as the warning message inform you to do so. You can easily reverse to Linksys OEM if you need to. Here is a useful [[https:... es for this device, then remove the EXAMPLEs The Linksys MR8300 has the following buttons: ^ BUTTON ... url", "comments"], "filterColumns": {"brand": "^Linksys$", "model": "^MR8300$"} } --> ==== Photos ===
Linksys WRT1200AC
105 Hits, Last modified:
inistration - Oct. 2015 */ //Front://\\ {{:media:linksys:linksys_wrt1200_ac_front.jpg?direct&400|**Front of the casing**}} //Back://\\ {{:media:linksys:linksys_wrt1200ac_back.jpg?direct&400|**Back of the casing**}} //Backside label://\\ {{:media:linksys:linksys_wrt1200ac_label.jpg?direct&400|**Backside label**}} ==== Opening the cas... lide into the rear feet //Main PCB://\\ {{:media:linksys:linksys_wrt1200ac_pcb.jpg?direct&400|**Photo of assembled PCB top view}} ===
Linksys EA8500
103 Hits, Last modified:
he Serial Port of this specific device: {{:media:linksys:ea8500_serial.jpg?direct&400x200|}} Newer revisions have no header: {{media:linksys:ea8500_serial_new.jpeg?direct&400x200|}} Pins are marked 1-5 on PCB, use... 00-0x000005f80000 : "alt_kernel" [ 1.738581] ata1: SATA link down (SStatus 0 SControl 300) [ 1.767541] 0x00... nor menu [ 2.357981] Netfilter messages via NETLINK v0.30. [ 2.361949] nf_conntrack version 0.5.0
Linksys EA7500 V1
102 Hits, Last modified:
with OpenWrt firmwares, and you won't be able to revert back to Linksys OEM firmware using above method. ==== Recove... 00-0x000005f80000 : "alt_kernel" [ 1.738612] ata1: SATA link down (SStatus 0 SControl 300) [ 1.763792] 0x00... nor menu [ 2.356888] Netfilter messages via NETLINK v0.30. [ 2.360824] nf_conntrack version 0.5.0 (3494 buckets, 13976 max) [ 2.367478] ctnetlink v0.93: registering with nfnetlink. [ 2.371946]
Linksys EA4500 v1, v2 / E4200 v2
101 Hits, Last modified:
*." The ''**factory.bin**'' image can be flashed directly from the Linksys web interface. Upgrading between OpenWrt image... (mtdparts) root=/dev/ram rw; bootm ${loadaddr}' mkdir /sda1 && mount /dev/sda1 /sda1 (no mistake it does not boot without it... Login using telnet/ssh and rum Commands: <code> mkdir /sda1 && mount /dev/sda1 /sda1 && cd /sda1 ubiformat /dev/mtd3 && ubiformat /dev/mtd3 -f ope... (LEDE 17.01 only!) ==== You could try to flash a Linksys firmware image (extracted from zip) directly from the LuCI web interface. :!: Do not use
Linksys E1200 v2
100 Hits, Last modified:
with only a Linksys logo. Linksys E1200 v2 with Linksys logo: was able to install 15.05.1 by upgrading firmware directly from linksys firmware, but wireless is not s... md=[killall -9 waninfo ] stop_wan_ipv6: done RTNETLINK answers: No such file or directory Set 0 to /proc/sys/net/ctf/wan_mode ... cmd=[killall nlinkd ] killall: cannot kill pid 493: No such process ... ot kill pid 503: No such process cmd=[killall -9 nlinkd ] killall: nlinkd: no process killed waitpid: No
Linksys EA6350 v4
99 Hits, Last modified:
olor> If both partitions are overwritten with non-Linksys firmwares, there is <color #ed1c24>**no safe method**</color> of reverting back to Linksys OEM firmware at time of wri... or this purpose. The bootcounter has a flaw that prevents direct install of OpenWrt. Use this procedure to bypa... unter flaw set back partition B as bootable (with Linksys GUI). To prevent this, add this code to ''etc/rc.local'' <code... ==== Upgrading OpenWrt ===== The advice for other Linksys dual partition routers, is to **revert** to booting Linksys stock firmware from the o
Linksys WRT1900ACS
96 Hits, Last modified:
ata2: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) xhci-hcd f10f0000.... nk down (SStatus 0 SControl 300) [ 1.251361] ata1: SATA link down (SStatus 0 SControl 300) [ 1.267282] xhci... -mi:10 [ 1.484661] mvsw61xx 10.mvsw61xx: Using direct addressing [ 1.490128] armada38x-rtc f10a38... ] init: - watchdog - [ 3.341658] scsi 2:0:0:0: Direct-Access PNY USB 3.0 FD 1.00 PQ:
Linksys EA7500 v2
91 Hits, Last modified:
write both partitions, there will be no method of reverting to booting and using Linksys firmware at this time. The “factory” openwrt image can be flashed directly from OEM stock firmware. After the flash the... 500v2_2.0.8.194281_prod.img'' downloaded from the Linksys website). - When the router reboots flash th... https://forum.openwrt.org/t/problem-installing-on-linksys-ea7500v2/116253|OpenWrt forum]] ===== Restore
Linksys WHW03 V2
85 Hits, Last modified:
mage show the exact pinout of the port: {{ :media:linksys:whw03v2_serial_pinout.jpeg?direct&600 | Serial port pinout }} ^ Serial connecti... ected iATU regions: 32 outbound, 8 inbound [ 0.505582] qcom-pcie 40000000.pci: Link up [ 0.505749] qcom-pcie 40000000.pci: PCI host bridge to bus 0000:00 [ 0.505771] pci_bus 0000:00: root bus resource [bus 00-ff
Linksys EA3500
81 Hits, Last modified:
(mtdparts) root=/dev/ram rw; bootm ${loadaddr}' mkdir /sda1 && mount /dev/sda1 /sda1 (no mistake it does not boot without it... Login using telnet/ssh and run commands: <code> mkdir /sda1 && mount /dev/sda1 /sda1 && cd /sda1 ubiformat /dev/mtd3 && ubiformat /dev/mtd3 -f ope... overnor ladder [ 0.049715] Kirkwood: MV88F6282-Rev-A1. [ 0.049894] Feroceon L2: Enabling L2 [ 0.0... net0-port@0: local-mac-address is not set [ 0.050554] [Firmware Info]: /ocp@f1000000/ethernet-contro
Linksys E5400
77 Hits, Last modified:
Linksys EA7300 v2
68 Hits, Last modified:
Linksys WRT3200ACM
61 Hits, Last modified:
Linksys WRT32X
55 Hits, Last modified:
Linksys EA7300 v1
53 Hits, Last modified:
  • Last modified: 2024/01/03 12:05
  • by aparcar