Search
You can find the results of your search below.
Fulltext results:
- ASUS TUF-AX4200
- an: port 1(lan1) entered forwarding state [ 21.150549] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready </WRAP>\\ ===== Notes ===== //Space for additional notes, links to forum threads or other resources.// * [[ht
- ASUS RT-AX53U / RT-AX1800U
- ownload the OpenWrt image, place it into you root directory of your TFTP-server, fire up your TFTP-serv... www.asus.com/support/FAQ/1000814/]] * Check the Link for OEM software, unzip downloaded trx file and use with Asus Restoration Tool as described on link above [[https://www.asus.com/networking-iot-serve... ersion 22.03.4), you can use the following method directly from OpenWRT: * Rename the asus stock firm
- ASUS TUF-AX6000
- load the correct TRX image (for the TUF AX6000)! Direct link: https://drive.google.com/drive/folders/1cpDfhKT0... mforming improves data rates and extends range by directing signals toward specific clients instead of in every direction at once. By carefully controlling transmi... cause their signals to interfere on purpose and redirect the resulting signal in a new direction. Basi
- ASUS RT-N56U B1
- e the reset button after 5 seconds and power LED blinking. - Upload OpenWrt sysupgrade image via TFTP:... t needs to be pressed until the power LED starts blinking slowly. Window starts at this point | ^ TFTP... ) RT-N56UB1 bootloader version: 1.0.0.0 Board: Ralink APSoC DRAM: 128 MB ASUS RT-N56UB1 gpio init : wp... t ============================================ Ralink UBoot Version: 4.3.0.0 --------------------------
- ASUS RT-AX54
- factory image to the filesystem. <code> wget <--link for the download the openwrt firmware--> </code> ... ownload the OpenWRT image, place it into you root directory of your TFTP-server, fire up your TFTP-serv... [[https://www.asus.com/support/FAQ/1000814/]] * Link for oem software, unzip download to trx file and use with Asus tool as described on link above [[https://www.asus.com/networking-iot-serve
- ASUS Lyra (MAP-AC2200)
- Reset router to factory defaults if it has been previously configured. Installing OpenWrt on this devi... he LED will //breathe// in multiple colors, then blink blue, and when ready, will have a steady blue col... >> Standard size for photos: add ?400 to the medialink */ /* When uploadi... 23:00:56 CST 2019 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nona
- ASUS RT-AC85P / ASUS RT-AC65P
- tton and keep pressed until the power LED starts blinking slowly. - Upload **factory.bin** image via T... lows you to see better what is going on and will prevent timeouts on the router in case the Linux box d... tton and keep pressed until the power LED starts blinking slowly. On the Linux side you should see that ... ckup copy can then be easily used from OpenWrt to revert the router to the original OEM firmware. If yo
- ASUS RT-AC88U
- : bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0) [ 2.214836] bcma-host-soc 180... us0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) [ 2.225047] bcma-host-soc 180... s0: bcma_of_get_irq() failed with rc=-22 [ 2.225055] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0) [ 2.235088] bcma-host-soc 180
- ASUS RT-AX89X
- need to connect with the user-pass/network setup previously. A reset can be performed with the stock fi... r portion of the Serial/Info Sticky on the bottom revealing the third through screw *Work an edge aro... load good CRC-16 matches (0x56D5) AQR PHY ID1: 0x3a1 AQR PHY ID2: 0xb4e2 ## Booting kernel from Legacy... 20 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c0383d [ 0.000000] CPU: P
- ASUS RT-AC87U
- : bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0) [ 0.626782] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) [ 0.637118] bcma: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0) [ 0.647248] bcma: bus0: Core ... found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0) [ 0.659000] bcma: bus0: Core
- ASUS RT-AC68U
- : bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0) [ 2.651853] bcma-host-soc 180... us0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) [ 2.661985] bcma-host-soc 180... found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0) [ 2.673251] bcma-host-soc 180... R2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0) [ 2.685896] bcma-host-soc 180
- ASUS WL-500g Premium
- 3147776 7913471 2382848 83 Linux mkdir -p /mnt/sda1-overlay #won't be used afterwards, just as reminder mkdir -p /mnt/sda2-swap #won't be used afterwards, just as reminder mkdir -p /mnt/sda3-data mkswap /dev/sda2 # [[docs:gui... -drives]] opkg install e2fsprogs mkfs.ext2 /dev/sda1 mkfs.ext2 /dev/sda3 #now pivot overlay #[[docs:g