Search

You can find the results of your search below.

OpenWrt v21.02.0-rc1 Changelog @releases:21.02
869 Hits, Last modified:
c]]'' **<nowiki>ath79:</nowiki>** <nowiki>remap D-Link DIR-859 A1 WPS button to WPS</nowiki> //<color #ccc>(</color... owiki>ath79:</nowiki>** <nowiki>add support for D-Link DIR-505</nowiki> //<color #ccc>(</color><color #282>+164<... owiki>ath79:</nowiki>** <nowiki>add support for D-Link DCH-G020 Rev. A1</nowiki> //<color #ccc>(</color><color #282>+207<... wiki>ramips:</nowiki>** <nowiki>add support for D-Link DIR-878 A1</nowiki> //<color #ccc>(</color><color #282>+198<
OpenSSL benchmarks @docs:guide-user:perf_and_log
240 Hits, Last modified:
16070 | 19.6 | 819.2 | 73.1 | 68.8 | | r48532 | Ralink RT5350 id:1 rev:3 | D-Link DIR-320 B1 | MIPS 24KEc V4.12 | 239.61 | 1.0.2g | 216... | 336.8 | 34.3 | 27.4 | | r39789 | Atheros AR9344 rev 1 | D-Link DIR-835 rev. A1 | MIPS 74Kc V4.12 | 278.93 | 1.0.1e | 33743550 | ... | 280.8 | 28.1 | 23.1 | | r42625 | Atheros AR7161 rev 2 | D-Link DIR-825 rev. B1 | MIPS 24Kc V7.4 | 452.19 | 1.0.1i | ... | 243.9 | 24.6 | 20.6 | | r40877 | Atheros AR7161 rev 2 | D-Link DIR-825 rev. B1 | MIPS 24Kc V7.4 | 452.19 | 1.0.1g |
Dataentry template background @meta
98 Hits, Last modified:
. ===== Example ===== <file> ====== Techdata: D-Link DIR-509 A1 ====== ~~HIDEPAGE~~ {{page>meta:infobox:dataentr... : https://wiki.openwrt.org/toh/d-link/dir-505 # https://wiki.openwrt.org/toh/brand/brand_model_... : https://wikidevi.com/wiki/D-Link_DIR-505_rev_A1 # wikidevi.com/wiki/yourdevice OEM Device Homepag... M Stock URL_url : http://www.dlink.com/uk/en/support/product/dir-505-shareport-mobile-companion # yourbrand.com/yourde
TP-Link TD-W8970 v1 @toh:tp-link
95 Hits, Last modified:
====== TP-Link TD-W8970 v1 ====== {{ media:tplink:td-w8970:td-w8970-v1.png?200|TD-W8970 v1.0}} The TD-W8970 v1 is a ... ware:soc:soc.lantiq|Lantiq]]'' SoC. The [[toh:tp-link:tp-link_td-w8970_v3.0|TD-W8970 v3]] is a Broadcom router which is not supported by OpenWrt. The TD-W89
Netgear R7800 (Nighthawk X4S AC2600) @toh:netgear
68 Hits, Last modified:
== Info ==== ^ Architecture | ARMv7 Processor rev 0 (v7l), arm_cortex-a15_neon-vfpv4 | ^ Vendor | Netgear | ^ Bo... re" 0x000007900000-0x000007980000 : "crashdump" ata1: SATA link down (SStatus 0 SControl 300) 0x000007980000-0x00... 00-0x2900017f] port 0x100 irq 26 [ 5.497002] ata1: SATA link down (SStatus 0 SControl 300) [ 5.502597] ehci... k [ 7.388161] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Press the [f] key and hit [enter] to
Linksys E8350 V1 @inbox:toh:linksys
63 Hits, Last modified:
smallest flash I/O unit: 2048 [ 2.698094] ata1: SATA link down (SStatus 0 SControl 300) [ 2.706747] UBI:... implementor 51 architecture 64 part 4d variant 2 rev 0 [ 3.944673] Registering SWP/SWPB emulation h... 30] L2TP core driver, V2.0 [ 15.395501] L2TP netlink interface [ 15.408028] nss_gmac: **************... 64 not registered [ 21.090971] spectral_init_netlink 52 NULL SKB [ 21.095282] Green-AP : Green-AP :
Jiringgot @user
62 Hits, Last modified:
to build below) * 2.4Ghz WLAN works with the RaLink driver: rt2x00 in conjunction with data from the ... ayfs is functional, create a new directory by ''mkdir /root/testdir'', then ''reboot'' and verify that the directory you created is still there by ''ls -l /... hat add device-tree tags in the rt2x00 driver. "ralink,eeprom=soc_wmac.eeprom" it shouldn't be to much w
Huawei B593u-12 @toh:huawei
62 Hits, Last modified:
| Boardtype "0x053d", Boardnum "1234", Boardrev "0x1301"| ^ [[docs:techref:hardware:soc|System-O... 0 </code> <code># ifconfig -a br0 Link encap:Ethernet HWaddr F8:01:13:C2:19:73 ... (38.6 KiB) TX bytes:14080 (13.7 KiB) br1 Link encap:Ethernet HWaddr 00:00:00:00:00:00 ... bytes:0 (0.0 B) TX bytes:90 (90.0 B) eth0 Link encap:Ethernet HWaddr F8:01:13:C2:19:73
ZyXEL NBG6515 AC750 @toh:zyxel
58 Hits, Last modified:
eeprom-for-wifi/55787]] * WLAN works with the RaLink driver: rt2x00 in conjunction with data from the ... ayfs is functional, create a new directory by ''mkdir /root/testdir'', then ''reboot'' and verify that the directory you created is still there by ''ls -l /... | ^ Bootloader | Ralink UBoot ver: 4.0.1.0 / ELX UBoot ver: 4.0.1.6 (Jan
Netgear WNDR3400 @toh:netgear
58 Hits, Last modified:
ed chip revision. There is no driver for BCM43236 rev1 + rev2 - see comment at [http://permalink.gmane.org/gmane.linux.kernel.wireless.general/914... t does not remember after reboots) <code> burn_hw_rev burn5gpass burn5gssid burnboardid burnethermac bu
Netgear RAX40 @inbox:toh:netgear
54 Hits, Last modified:
ed_irq 73 irq_base 351 [ 0.340000] dma-grx500 1a100000.dma: Init done - hw rev: A, ports: 1, channels: 16 [ 0.340000] dma-grx... 0.350000] dma-grx500 1a200000.dma: Init done - hw rev: A, ports: 1, channels: 12 [ 0.360000] [gptu] ... .430000] dma0-grx500 16e00000.dma: Init done - hw rev: A, ports: 4, channels: 16 [ 0.440000] [pinctr... ..0x00000000bf8fffff [ 1.930000] pcie_wait_phy_link_up port 2 timeout [ 1.940000] pcie_rc_initiali
TP-Link Archer MR200 v4 @inbox:toh:tp-link
54 Hits, Last modified:
====== TP-Link Archer MR200 v4 ====== ~~NOTOC~~ /* This template is intended to be used via https://wik... ith 4 fast (100mbps) Ethernet ports. {{ :media:tplink:mr200_v4_overview.png?nolink&400|}} ===== OpenWrt support ===== <color red>**Not supported.**</color>... forum.openwrt.org/t/adding-openwrt-support-for-tp-link-archer-mr200-v4/32257]] * [[https://github.com/
D-Link DCH-G020 A1 @toh:d-link
53 Hits, Last modified:
tocol family 16 [ 0.118409] MIPS: machine is D-Link DCH-G020 Rev. A1 [ 0.384124] i2c-gpio i2c-gpio.0: using pins 0 ... 0.706777] 0x000000ed0000-0x000000f50000 : "mydlink" [ 0.714756] 0x000000f50000-0x000000fd0000 : "data1" [ 0.722586] 0x000000fd0000-0x000000ff0000 : "... - [ 4.299938] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Press the [f] key and hit [enter] to
Device page example (Archer C7) @playground
49 Hits, Last modified:
16256 [ 0.000000] Kernel command line: board=DIR-505-A1 console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot... n device: ath79 [ 0.100000] MIPS: machine is D-Link DIR-505 A1 [ 0.350000] bio: create slab <bio-0> at 0 [ ... 16256 [ 0.000000] Kernel command line: board=DIR-505-A1 console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot... n device: ath79 [ 0.100000] MIPS: machine is D-Link DIR-505 A1 [ 0.350000] bio: create slab <bio-0> at 0 [
小米Redmi路由器AC2100 @zh:toh:xiaomi
48 Hits, Last modified:
>> Standard size for photos: add ?400 to the medialink */ /* When uploadi... ============================================== RALINK_GPIOMODE = ad428 GPIO0~31 DIR = 40 GPIO0~31 DATA = fff41517 Set gpio_4,3 direction to input Set gpio_10,6 direction to output GPIO0~31 DIR = 440 GPIO0~31 DATA = fff41517 Set gpio_6 outpu
Xiaomi Redmi Router AC2100 @toh:xiaomi
48 Hits, Last modified:
Netgear R7500 @toh:netgear
46 Hits, Last modified:
Netgear WNDR4700 and WNDR4720 @toh:netgear
45 Hits, Last modified:
ZTE ZXHN H268A @toh:zte
45 Hits, Last modified:
TP-Link Archer VR200 / VR200v @toh:tp-link
44 Hits, Last modified:
Huawei EchoLife HG556a @toh:huawei
43 Hits, Last modified:
Turris CZ.NIC Omnia @toh:turris
40 Hits, Last modified:
ASUS WL-500g Premium @toh:asus
38 Hits, Last modified:
Linksys EA4500 v1, v2 / E4200 v2 @toh:linksys
33 Hits, Last modified:
Linksys EA3500 @toh:linksys
32 Hits, Last modified:
Cisco ON-100 k9_v01/_v02 @toh:cisco
28 Hits, Last modified:
Ubiquiti EdgeRouter Lite @toh:ubiquiti
21 Hits, Last modified:
Sagem F@ST2804 v.7 @ru:toh:sagem
13 Hits, Last modified:
  • Last modified: 2021/04/26 21:14
  • by hauke