Search

You can find the results of your search below.

TP-Link Archer MR200 v4 @inbox:toh:tp-link
54 Hits, Last modified:
====== TP-Link Archer MR200 v4 ====== ~~NOTOC~~ /* This template is intended to be used via https://wik... ith 4 fast (100mbps) Ethernet ports. {{ :media:tplink:mr200_v4_overview.png?nolink&400|}} ===== OpenWrt support ===== <color red>**Not supported.**</color>... forum.openwrt.org/t/adding-openwrt-support-for-tp-link-archer-mr200-v4/32257]] * [[https://github.com/
TP-Link TD-W8970 v1 @toh:tp-link
94 Hits, Last modified:
====== TP-Link TD-W8970 v1 ====== {{ media:tplink:td-w8970:td-w8970-v1.png?200|TD-W8970 v1.0}} The TD-W8970 v1 is a ... ware:soc:soc.lantiq|Lantiq]]'' SoC. The [[toh:tp-link:tp-link_td-w8970_v3.0|TD-W8970 v3]] is a Broadcom router which is not supported by OpenWrt. The TD-W89
Ubiquiti EdgeRouter Lite @toh:ubiquiti
21 Hits, Last modified:
ted to be able to work with them. <code bash> $ mkdir kernel $ mount /dev/sdb1 kernel $ mkdir root $ mount /dev/sdb2 root $ mkdir oroot $ mount sysupgrade-erlite/root oroot -o loop </code> Now we... evice 0: Vendor: Prod.: USB DISK 2.0 Rev: PMAP Type: Removable Hard Disk
OpenSSL Benchmarks @docs:guide-user:perf_and_log
239 Hits, Last modified:
16070 | 19.6 | 819.2 | 73.1 | 68.8 | | r48532 | Ralink RT5350 id:1 rev:3 | D-Link DIR-320 B1 | MIPS 24KEc V4.12 | 239.61 | 1.0.2g | 216... | 336.8 | 34.3 | 27.4 | | r39789 | Atheros AR9344 rev 1 | D-Link DIR-835 rev. A1 | MIPS 74Kc V4.12 | 278.93 | 1.0.1e | 33743550 | ... | 280.8 | 28.1 | 23.1 | | r42625 | Atheros AR7161 rev 2 | D-Link DIR-825 rev. B1 | MIPS 24Kc V7.4 | 452.19 | 1.0.1i | ... | 243.9 | 24.6 | 20.6 | | r40877 | Atheros AR7161 rev 2 | D-Link DIR-825 rev. B1 | MIPS 24Kc V7.4 | 452.19 | 1.0.1g |
Huawei EchoLife HG556a @toh:huawei
43 Hits, Last modified:
with a totally different board, equiped with a Ralink wifi chip, and worse quality (no metal shieldings... t is **recomendable to put a heat sink over the Ralink wifi chip** to avoid overheating (some users repo... _data partition into it, example: >''mount /dev/sda1 /mnt'' >''dd if=/dev/mtd4 of=/mnt/hg556a-cal_data... MX29GL128EH | | **C** | **HG56BZRB VER.A** | Ralink RT3062F | HG556**<color crimson>C</color>**VDFA
Netgear R7500 @toh:netgear
46 Hits, Last modified:
s25fl512s m25p80 spi5.0: pm25lv512 (64 Kbytes) ata1: SATA link down (SStatus 0 SControl 300) UBI: attaching mtd6... 00-0x2900017f] port 0x100 irq 26 [ 4.926138] ata1: SATA link down (SStatus 0 SControl 300) [ 4.932691] ehci... 400000.ethernet eth1: configuring for fixed/sgmii link mode [ 7.605180] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 7.6129
Linksys EA4500 v1, v2 / E4200 v2 @toh:linksys
33 Hits, Last modified:
(mtdparts) root=/dev/ram rw; bootm ${loadaddr}' mkdir /sda1 && mount /dev/sda1 /sda1 (no mistake it does not boot without it... Login using telnet/ssh and rum Commands: <code> mkdir /sda1 && mount /dev/sda1 /sda1 && cd /sda1 ubiformat /dev/mtd3 && ubiformat /dev/mtd3 -f ope... outer is booting up. The router white LED shall blink rapidly and that's when you cut the power--induci... 4745.64k 40264.68k 71031.47k 89935.47k sha1 2286.73k 6357.91k 13247.40k
Linksys EA3500 @toh:linksys
32 Hits, Last modified:
(mtdparts) root=/dev/ram rw; bootm ${loadaddr}' mkdir /sda1 && mount /dev/sda1 /sda1 (no mistake it does not boot without it... Login using telnet/ssh and run commands: <code> mkdir /sda1 && mount /dev/sda1 /sda1 && cd /sda1 ubiformat /dev/mtd3 && ubiformat /dev/mtd3 -f ope... overnor ladder [ 0.049715] Kirkwood: MV88F6282-Rev-A1. [ 0.049894] Feroceon L2: Enabling L2 [ 0.0... net0-port@0: local-mac-address is not set [ 0.050554] [Firmware Info]: /ocp@f1000000/ethernet-contro
Cisco ON-100 k9_v01/_v02 @toh:cisco
28 Hits, Last modified:
ata1: SATA max UDMA/133 irq 32 [ 2.401338] ata1: SATA link down (SStatus 0 SControl F300) [ 2.418614] i... 422325] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled... 432232] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 11.472807] device eth0 entered promisc... [ 11.482013] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 14.542372] mv643xx_eth_port mv
Turris CZ.NIC Omnia @toh:turris
40 Hits, Last modified:
nsole. - Insert the USB drive and mount it: ''mkdir /mnt; mount /dev/sda1 /mnt''. - Flash the OpenWrt image to eMMC: ''dd... registered f10a3800.rtc as rtc0 [ 4.571046] ata1: SATA link down (SStatus 0 SControl 300) [ 4.576488] ata2... f0000.usb3: xHCI Host Controller [ 1.290825] ata1: SATA link down (SStatus 0 SControl 300) [ 1.296072] xhci... 030000.ethernet eth1: configuring for fixed/rgmii link mode [ 8.748678] IPv6: ADDRCONF(NETDEV_UP): et
Netgear WNDR4700 and WNDR4720 @toh:netgear
45 Hits, Last modified:
rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F0300) ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133 ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 1/32) ata1.00: configured for UDMA/133 blk_queue_max_hw_segm
Xiaomi Redmi Router AC2100 @toh:xiaomi
48 Hits, Last modified:
>> Standard size for photos: add ?400 to the medialink */ /* When uploadi... ============================================== RALINK_GPIOMODE = ad428 GPIO0~31 DIR = 40 GPIO0~31 DATA = fff41517 Set gpio_4,3 direction to input Set gpio_10,6 direction to output GPIO0~31 DIR = 440 GPIO0~31 DATA = fff41517 Set gpio_6 outpu
  • Last modified: 2020/12/09 22:33
  • by hauke