Search

You can find the results of your search below.

Netgear WNDR3400 @toh:netgear
58 Hits, Last modified:
ed chip revision. There is no driver for BCM43236 rev1 + rev2 - see comment at [http://permalink.gmane.org/gmane.linux.kernel.wireless.general/914... t does not remember after reboots) <code> burn_hw_rev burn5gpass burn5gssid burnboardid burnethermac bu
ASUS WL-500g Premium @toh:asus
38 Hits, Last modified:
3147776 7913471 2382848 83 Linux mkdir -p /mnt/sda1-overlay #won't be used afterwards, just as reminder mkdir -p /mnt/sda2-swap #won't be used afterwards, just as reminder mkdir -p /mnt/sda3-data mkswap /dev/sda2 # [[docs:gui... -drives]] opkg install e2fsprogs mkfs.ext2 /dev/sda1 mkfs.ext2 /dev/sda3 #now pivot overlay #[[docs:g
Linksys EA4500 v1, v2 / E4200 v2 @toh:linksys
33 Hits, Last modified:
(mtdparts) root=/dev/ram rw; bootm ${loadaddr}' mkdir /sda1 && mount /dev/sda1 /sda1 (no mistake it does not boot without it... Login using telnet/ssh and rum Commands: <code> mkdir /sda1 && mount /dev/sda1 /sda1 && cd /sda1 ubiformat /dev/mtd3 && ubiformat /dev/mtd3 -f ope... outer is booting up. The router white LED shall blink rapidly and that's when you cut the power--induci... 4745.64k 40264.68k 71031.47k 89935.47k sha1 2286.73k 6357.91k 13247.40k
Linksys EA3500 @toh:linksys
32 Hits, Last modified:
(mtdparts) root=/dev/ram rw; bootm ${loadaddr}' mkdir /sda1 && mount /dev/sda1 /sda1 (no mistake it does not boot without it... Login using telnet/ssh and run commands: <code> mkdir /sda1 && mount /dev/sda1 /sda1 && cd /sda1 ubiformat /dev/mtd3 && ubiformat /dev/mtd3 -f ope... overnor ladder [ 0.049715] Kirkwood: MV88F6282-Rev-A1. [ 0.049894] Feroceon L2: Enabling L2 [ 0.0... net0-port@0: local-mac-address is not set [ 0.050554] [Firmware Info]: /ocp@f1000000/ethernet-contro
  • Last modified: 2020/12/09 22:33
  • by hauke